Mark For: SLC™ trademark registration is intended to cover the categories of cured in place service lateral connections of polymeric materials, including laminated resin absorbent material and thermosetting resins with polymeric coatings for rehabilitation of existing pipelines, including resin cured by light. [all]
Status
2022-08-16 UTC
DEAD APPLICATION Refused Dismissed or Invalidated
This trademark application was refused, dismissed, or invalidated by the Office and this application is no longer active.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
050:
Merchandise Not Otherwise Classified
Primary International Class
017 - Primary Class
(Rubber goods) Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Domestic Representative
MICHAEL I. WOLFSON
Attorney Name
MICHAEL I. WOLFSON
Attorney Docket Number
ITI-316 (201
Law Office Assigned
M20
Employee Name
DUBOIS, SUSAN L
Timeline
2001-09-13
Application Filed
2002-12-31
Published
2002-12-31
Published for Opposition
2004-05-17
Abandon
2004-05-17
Status: Abandoned because no Statement of Use or Extension Request timely filed after Notice of Allowance was issued. To view all docume
MICHAEL I. WOLFSON REED SMITH LLP 599 LEXINGTON AVENUE NEW YORK NY 10022-7650
Good, Services, and Codes
(ABANDONED) IC 017. US 001 005 012 013 035 050. G & S: CURED IN PLACE SERVICE LATERAL CONNECTIONS OF POLYMER IC MATERIALS, INCLUDING LAMINATED RESIN ABSORBENT MATERIAL AND THERMOSETTING RESINS WITH POLYMER IC COATINGS FOR REHABILITATION OF EXISTING PIPELINES, INCLUDING RESIN CURED BY LIGHT
International Codes:
17
U.S. Codes:
001,005,012,013,035,050
Type Code
Type
GS0171
CURED IN PLACE SERVICE LATERAL CONNECTIONS OF POLYMERIC MATERIALS, INCLUDING LAMINATED RESIN ABSORBENT MATERIAL AND THERMOSETTING RESINS WITH POLYMERIC COATINGS FOR REHABILITATION OF EXISTING PIPELINES, INCLUDING RESIN CURED BY LIGHT
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.