Mark For: CLPA® trademark registration is intended to cover the categories of electronic control apparatus, namely, data processor, computers and programmable controllers, all for use in the automatic control of mechanical and industrial processes in factories and computer programs for use therewith and for use in controlling operation of the aforesaid apparatus in a computer network. [all]
Status
2022-05-12 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
(Electrical and scientific apparatus) Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signaling, checking (supervision), lifesaving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
Yes
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Domestic Representative
HUGHES HUBBARD & REED LLP
Attorney Name
Perla M. Kuhn
Attorney Docket Number
74011.0082/d
Law Office Assigned
L30
Employee Name
PENDLETON, CAROLYN A
Timeline
2000-11-09
Application Filed
2002-06-18
Published
2002-06-18
Published for Opposition
2003-03-25
Trademark Registered
2008-02-12
Location: SCANNING ON DEMAND
2009-11-01
Cancelled
2009-11-01
Status: Dead/Cancelled
2009-11-01
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
PERLA M. KUHN HUGHES HUBBARD & REED LLP ONE BATTERY PARK PLAZA NEW YORK, NEW YORK 10004
Good, Services, and Codes
(CANCELLED) IC 009. US 021 023 026 036 038. G & S: Electronic control apparatus, namely, data processor, computers and programmable controllers, all for use in the automatic control of mechanical and industrial processes in factories and computer programs for use therewith and for use in controlling operation of the aforesaid apparatus in a computer network
International Codes:
9
U.S. Codes:
021,023,026,036,038
Type Code
Type
GS0091
Electronic control apparatus, namely, data processor, computers and programmable controllers, all for use in the automatic control of mechanical and industrial processes in factories and computer programs for use therewith and for use in controlling operation of the aforesaid apparatus in a computer network
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.