Mark For: BIT® trademark registration is intended to cover the categories of power drilling and cutting tools, namely, drill machine tools, lathe tools, milling machine tools including face mill tools and end mill tools, boring machine tools, and surface cutting tools, and parts and components therefor. [all]
Status
2022-10-04 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
3 - AN ILLUSTRATION DRAWING WHICH INCLUDES WORD(S)/ LETTER(S)/NUMBER(S)
Mark Type
TRADEMARK
Standard Character Claim
No
Register
PRINCIPAL
Current Location
SCANNING ON DEMAND 2007-10-12
Basis
1(a)
Class Status
SECTION 8 - CANCEL
Primary US Classes
013:
Hardware, Plumbing and Steamfitting Supplies
019:
Vehicles
021:
Electrical Apparatus, Machines and Supplies
023:
Cutlery, Machinery, Tools and Parts Thereof
031:
Filters and Refrigerators
034:
Heating, Lighting and Ventilating Apparatus
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Attorney Name
DON B. FINKELSTEIN
Law Office Assigned
M50
Employee Name
BROWNE, DAYNA J
Timeline
2000-06-15
Date of First Use
2000-06-15
Date of Use In Commerce
2000-08-24
Application Filed
2002-03-26
Published
2002-03-26
Published for Opposition
2002-06-18
Trademark Registered
2007-10-12
Location: SCANNING ON DEMAND
2009-03-21
Cancelled
2009-03-21
Status: Dead/Cancelled
2009-03-21
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
DON B. FINKELSTEIN LAW OFFICES OF DON FINKELSTEIN 3858 W CARSON ST STE 216 TORRANCE CA 90503-6700
Good, Services, and Codes
(CANCELLED) IC 007. US 013 019 021 023 031 034 035. G & S: Power drilling and cutting tools, namely, drill machine tools, lathe tools, milling machine tools including face mill tools and end mill tools, boring machine tools, and surface cutting tools, and parts and components therefor. FIRST USE: 20000615. FIRST USE IN COMMERCE: 20000615
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
GUY A. PETERSEN
Application
Paper Correspondence Incoming
| 