Mark For: PLS™ trademark registration is intended to cover the categories of polyimide based flexible circuit laminates, consisting of a polyimide substrate with stainless steel foil laminated to one surface and copper foil to the other, used in electrical interconnects in hard disk drives to connect the recording head with the drive electronics. [all]
Status
2022-10-23 UTC
DEAD APPLICATION Refused Dismissed or Invalidated
This trademark application was refused, dismissed, or invalidated by the Office and this application is no longer active.
(Electrical and scientific apparatus) Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signaling, checking (supervision), lifesaving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Michael A. Cantor
Attorney Docket Number
RGT-0007-T
Law Office Assigned
L30
Employee Name
GARDINER, JOHN D
Timeline
2000-04-20
Application Filed
2001-12-18
Published
2001-12-18
Published for Opposition
2003-09-13
Abandon
2003-09-13
Status: Abandoned because no Statement of Use or Extension Request timely filed after Notice of Allowance was issued. To view all docume
MICHAEL A. CANTOR CANTOR COLBURN LLP 55 GRIFFIN ROAD SOUTH BLOOMFIELD, CT 06002
Good, Services, and Codes
(ABANDONED) IC 009. US 021 023 026 036 038. G & S: POLYIMIDE BASED FLEXIBLE CIRCUIT LAMINATES, CONSISTING OF A POLYIMIDE SUBSTRATE WITH STAINLESS STEEL FOIL LAMINATED TO ONE SURFACE AND COPPER FOIL TO THE OTHER, USED IN ELECTRICAL INTERCONNECTS IN HARD DISK DRIVES TO CONNECT THE RECORDING HEAD WITH THE DRIVE ELECTRONICS
International Codes:
9
U.S. Codes:
021,023,026,036,038
Type Code
Type
GS0091
POLYIMIDE BASED FLEXIBLE CIRCUIT LAMINATES, CONSISTING OF A POLYIMIDE SUBSTRATE WITH STAINLESS STEEL FOIL LAMINATED TO ONE SURFACE AND COPPER FOIL TO THE OTHER, USED IN ELECTRICAL INTERCONNECTS IN HARD DISK DRIVES TO CONNECT THE RECORDING HEAD WITH THE DRIVE ELECTRONICS
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
POLYIMIDE LAMINATE SYSTEMS, LLC
Application
Notice of Abandonment
| 