Mark For: SLIMLINE® trademark registration is intended to cover the categories of apparatus for the extrusion of plastic profiles, namely, extruders, dry calibration devices in the nature of dies, collars and rollers for receiving extruded plastic profiles, wet calibration devices in the nature of dies, collars and rollers positioned in housings for receiving a cooling fluid, haul offs in the nature of endless conveyors, saws for plastic profiles, and devices for finishing plastic profiles in the nature of dies, collars and rollers. [all]
Status
2022-10-24 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
Yes
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Domestic Representative
Kevin W. Guynn
Attorney Name
Kevin W Guynn
Attorney Docket Number
4433.76355
Law Office Assigned
M50
Employee Name
VERHOSEK, WILLIAM T
Timeline
2000-04-12
Application Filed
2002-01-22
Published
2002-01-22
Published for Opposition
2002-04-16
Trademark Registered
2008-05-08
Location: POST REGISTRATION
2012-11-23
Cancelled
2012-11-23
Status: Dead/Cancelled
2012-11-23
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
Kevin W Guynn Greer, Burns & Crain, Ltd. 300 S. Wacker Dr. Suite 2500 Chicago IL 60606
Good, Services, and Codes
(CANCELLED) IC 007. US 013 019 021 023 031 034 035. G & S: Apparatus for the extrusion of plastic profiles, namely, extruders, dry calibration devices in the nature of dies, collars and rollers for receiving extruded plastic profiles, wet calibration devices in the nature of dies, collars and rollers positioned in housings for receiving a cooling fluid, haul offs in the nature of endless conveyors, saws for plastic profiles, and devices for finishing plastic profiles in the nature of dies, collars and rollers
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
Type Code
Type
GS0071
Apparatus for the extrusion of plastic profiles, namely, extruders, dry calibration devices in the nature of dies, collars and rollers for receiving extruded plastic profiles, wet calibration devices in the nature of dies, collars and rollers positioned in housings for receiving a cooling fluid, haul offs in the nature of endless conveyors, saws for plastic profiles, and devices for finishing plastic profiles in the nature of dies, collars and rollers
Trademark Filing History
Description
Date
Proceeding Number
CANCELLED SEC. 8 (10-YR)/EXPIRED SECTION 9
2012-11-23
REGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.