Mark For: DYNAGEAR® trademark registration is intended to cover the categories of automotive engine parts, namely, timing belts, timing sets comprising timing chains and timing sprockets, adjusters for controlling dampeners for controlling chain movement, tensioners for applying tension to chains, guide rails for positioning chains, cam buttons for controlling cam shaft end play, oil pumps, oil pump screens, and oil pump shafts. [all]
Status
2022-10-27 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Attorney Name
Benjamin E. Leace
Attorney Docket Number
DYN-V00221
Law Office Assigned
M50
Employee Name
VOGLER, ANN LINNEHAN
Timeline
1976-06-00
Date of First Use
1976-06-01
Date of First Use
1976-06-01
Date of Use In Commerce
2000-04-03
Application Filed
2001-01-02
Published
2001-01-02
Published for Opposition
2001-03-27
Trademark Registered
2006-11-20
Location: SCANNING ON DEMAND
2007-12-29
Cancelled
2007-12-29
Status: Dead/Cancelled
2007-12-29
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
BENJAMIN E. LEACE RATNER & PRESTIA ONE WESTLAKES BERWYN STE 301 P.O. BOX 980 VALLEY FORGE PA 19482-0980
Good, Services, and Codes
(CANCELLED) IC 007. US 013 019 021 023 031 034 035. G & S: AUTOMOTIVE ENGINE PARTS, NAMELY, TIMING BELTS, TIMING SETS COMPRISING TIMING CHAINS AND TIMING SPROCKETS, ADJUSTERS FOR CONTROLLING DAMPENERS FOR CONTROLLING CHAIN MOVEMENT, TENSIONERS FOR APPLYING TENSION TO CHAINS, GUIDE RAILS FOR POSITIONING CHAINS, CAM BUTTONS FOR CONTROLLING CAM SHAFT END PLAY, OIL PUMPS, OIL PUMP SCREENS, AND OIL PUMP SHAFTS. FIRST USE: 19760600. FIRST USE IN COMMERCE: 19760600
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
Type Code
Type
GS0071
AUTOMOTIVE ENGINE PARTS, NAMELY, TIMING BELTS, TIMING SETS COMPRISING TIMING CHAINS AND TIMING SPROCKETS, ADJUSTERS FOR CONTROLLING DAMPENERS FOR CONTROLLING CHAIN MOVEMENT, TENSIONERS FOR APPLYING TENSION TO CHAINS, GUIDE RAILS FOR POSITIONING CHAINS, CAM BUTTONS FOR CONTROLLING CAM SHAFT END PLAY, OIL PUMPS, OIL PUMP SCREENS, AND OIL PUMP SHAFTS
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Dynagear Inc.
Application
Registration Certificate
| 