BIOVERA
MedQuest Products, Inc.
Application Filed: 1998-01-20
Trademark Application Details
ABANDONED - NO STATEMENT OF USE FILED
| Research |
OneLook
Acronym Finder
|
| Serial Number | 75420085 |
| Mark Drawing Code | 1000: Typeset: Word(s)/letter(s)/number(s) |
| Attorney Name | Inga Regenass |
| Attorney Docket Number | 39573.840005 |
| Law Office Assigned | L50 |
| Employee Name | CHARLON, BARNEY LAWREN |
Timeline
| 1998-01-20 | Application Filed |
| 2001-04-24 | Published for Opposition |
| 2002-01-18 | Status: Dead/Abandoned |
| 2002-06-29 | Abandon |
| 2002-12-12 | Location: FILE REPOSITORY (FRANCONIA) |
| 2018-07-08 | Transaction Date |
Trademark Applicants & Owners
| Owner: |  MedQuest Products, Inc. |
| Address | 825 North 300 West Salt Lake City UT 84103 |
| Legal Entity Type | Corporation |
| Legal Entity State | UT |
Documents
Click the blue "Refresh" button to load certificates, specimines, application, and other documents.
Attorney of Record
Good, Services, and Codes
| International Codes: | 40 |
| U.S. Codes: | 100,103,106 |
| Type Code | Type |
|---|---|
| GS0401 | Manufacture of scissors; knives; drill bits; reamers; saw blades; pliers; end mills; wire cutters; precision coining dies; rollers; pins; screws; bore gauges; stamp metal forming tools; extrusion dies; spool lips for spinning reels; counter bores; taps broaches; gear cutters; bearings; bushings; gears; splines; actuators; push rods; cams; cam shafts; hobs; punches; valve stems; router bits; engine parts; blanking dies; resistance welding electrodes; scrapers; gouges; countersinks; counterbores; silicon wafers and chips; pump plungers; embroidery needles; VLSI semiconductors; compressor blades/vanes; jewelry; door hardware; writing instruments; eyeglass frames; shafts and seals; marine hardware; plumbing fixtures; slitters; aerospace components; plastic molds; dental instruments and devices; food processing equipment; key duplicators; forming dies; cutting tools; granulator blades; powdered metal dies; seaming rolls; burnishers; engravers; minting devices; razor blades; toy components; umbrellas; optical fibers; integrated circuits; video/audio heads; video/audio tapes; computer floppy disks; packaging; solar cells; kitchen utensils; window panes; golf clubs; bicycle components; reflectors; spark plugs; lamp shades; key chains; piston rings; fluid pumps; super conducting thin films; photo diodes; light emitting diodes; diode lasers; electrodes; electrochemical cells; thermolytic coolers; nuclear fuel pellets; magnetic recording media and heads; fluid valves; solenoids; disk drives; circuits to provide protection from electromagnetic interference EMI; circuit boards; belts; footwear; UV adhesives; tubing; casters; filters; paper products; actuators; belts; fishing equipment; integrated circuits; audio/video recording equipment and media; kitchen utensils such as pots and pans; plastic gears; razor blades; blood pumps such as ventricular assist devices; artificial hearts, intra-aortic balloon pumps and impellers; flow probes; catheters, especially those used in long-term indwelling procedures, cardiotomy and cerebrovascular, and those needing a safer and more reliable radio-opaque covering or marker; stents; existing stents made from metal, ceramic and plastic and those used for an annuloplasty ring; balloons such as epitaxis, catheter, occluder, intra-aortic balloons and angioplasty balloons; motors, bearings and bearing components such as pivots, and inner and outer races used in actuators for medical devices; soft-tissue implants including intravaginal and colostomy pouches, breast implants, penile and testicular implants; disks and struts of valves of the type used in hearts; shunts such as a dialysis shunt, an A-V shunt, a central nervous system shunt, an endolymphatic shunt tube, a periotoneal shunt and a hydrocephalys shunt; silicone-based medical devices including inhaler seals, valves for laryngechtomy prostheses, nasal tampons/inserts, and tubes; a plastic sheath covering current-carrying loads, as well as the leads themselves, connectors, feedthroughs for any implanted, electrically powered device which can be optical or cochlear in nature such as a pacemaker, defibrillator, cardioverter, bipotential electrodes and leads, neural stimulators such as a cerebellar, brain, cranial, nerve and spinal cord device; arterial filters; vascular grafts; varicose vein cuffs; intracardiac, pledget, pericardial and epicardial patches; contraceptive and Ob/Gyn devices including a plug prostheses, tubal occlusion devices such as band, clip, insert and valve, urethral devices such as a stent, dilator and a catheter, IUDs and diaphragms; angiographic and other guide wires; sensors and transducers which are of the implantable variety as well as the non-implantable short-term variety, including those used in measuring blood flow, blood pressure, vascular access devices, those which can be protected with a conductive layer of the coating, a catheter tip pressure transducer, and an invasive glucose sensor; occluders, including those used in patent ductus arteriosus, tracheotomy tubes; hermetically sealed cans and other enclosures having a plastic-based substrate, including those used to encase electronics of any type, for actuators, sensors and fluids; surgical instruments and devices; including catheters of all types, needles, trocars, feeding/breathing tubes, transfusion tubes, clips, surgical staples, electrosurgical instruments, pumps, as well as knives, scalpels, scissors, clamps, coagulators, dilators, retractors, examination gloves, non-absorbable sutures and ligatures, microtomes, surgical meshes, tonsil dissectors, and vascular clamps, stereotaxis instruments and accessories, and heat exchangers; various orthopedic devices, such as synthetic ligaments and tendons, fallopian tube replacements, ear prostheses, smooth or threaded metallic bone fixation fastener, bone plates and skull plates; measuring and analytical devices including blood measuring and evaluating devices, blood collection systems, containers for blood and other sensitive fluids, linings, tubes and blood-contacting surfaces of laboratory instruments, and leads used in such things as an EEG, ECG, etc; syringes, plungers; intraocular lenses; drug containers and packaging; infusion ports; vascular access devices; hearing aids; implantable drug delivery pump components, including drug delivery catheters, namely, providing an amorphous, conductive, and non-stick coating thereto, to the order and specification of others |
Trademark Filing History
| Description | Date | Event Coding |
|---|---|---|
| ASSIGNED TO EXAMINER | 1998-09-10 | 1 DOCK D:Assigned to Examiner |
| NON-FINAL ACTION MAILED | 1998-09-11 | 2 CNRT F:First Action |
| CORRESPONDENCE RECEIVED IN LAW OFFICE | 1999-03-11 | 3 CRFA I:Incoming Correspondence |
| UNRESPONSIVE/DUPLICATE PAPER RECEIVED | 1999-05-10 | 4 UNPR I:Incoming Correspondence |
| FINAL REFUSAL MAILED | 1999-09-03 | 5 CNFR O:Outgoing Correspondence |
| CORRESPONDENCE RECEIVED IN LAW OFFICE | 1999-10-18 | 6 CRFA I:Incoming Correspondence |
| NON-FINAL ACTION MAILED | 2000-02-25 | 7 CNRT F:First Action |
| CORRESPONDENCE RECEIVED IN LAW OFFICE | 2000-04-05 | 8 CRFA I:Incoming Correspondence |
| APPROVED FOR PUB - PRINCIPAL REGISTER | 2000-10-17 | 9 CNSA P: |
| NOTICE OF PUBLICATION | 2001-04-11 | 10 NPUB O:Outgoing Correspondence |
| PUBLISHED FOR OPPOSITION | 2001-04-24 | 11 PUBO A:Allowance for Publication |
| NOA MAILED - SOU REQUIRED FROM APPLICANT | 2001-07-17 | 12 NOAM O:Outgoing Correspondence |
| ABANDONMENT - NO USE STATEMENT FILED | 2002-06-29 | 13 ABN6 S: |
Similar Marks
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
| 