Mark For: SPEEDLOCK® trademark registration is intended to cover the categories of ducting for dust and fume extraction, ventilation and pneumatic conveying, composed wholly or principally of metal, and tubes for dust and fume extraction, ventilation and pneumatic conveying, composed wholly or principally of metal; and components and accessories for the foregoing, composed wholly or principally of metal, namely, flanges, bends, branches, "Y"-pieces, square to round transition pieces, telescopic sections, locking rings, dampers, cones, support brackets, floor sweeps, duct silencers, diverter valves and rotary valves.
Status
2024-01-12 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
(Metal goods) Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; non-electric cables and wires of common metal; iron mongery, small items of metal hardware; pipes and tubes of metal; safes; goods of common metal not included in other classes; ores.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
Yes
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Domestic Representative
Poms, Smith, Lande & Rose, P.C.
Attorney Name
Richard L. Gausewitz
Attorney Docket Number
110.142
Law Office Assigned
L40
Employee Name
ZERVAS, ALBERT JAMES
Timeline
1995-08-11
Application Filed
1997-03-04
Published
1997-03-04
Published for Opposition
1997-05-27
Location: FILE REPOSITORY (FRANCONIA)
1997-05-27
Trademark Registered
2004-02-28
Cancelled
2004-02-28
Status: Dead/Cancelled
2004-02-28
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
Richard L. Gausewitz Poms, Smith, Lande & Rose, P.C. 2029 Century Park East 38th Floor Los Angeles, CA 90067-3024
Good, Services, and Codes
International Codes:
6
U.S. Codes:
002,012,013,014,023,025,050
Type Code
Type
GS0061
ducting for dust and fume extraction, ventilation and pneumatic conveying, composed wholly or principally of metal, and tubes for dust and fume extraction, ventilation and pneumatic conveying, composed wholly or principally of metal; and components and accessories for the foregoing, composed wholly or principally of metal, namely, flanges, bends, branches, "Y"-pieces, square to round transition pieces, telescopic sections, locking rings, dampers, cones, support brackets, floor sweeps, duct silencers, diverter valves and rotary valves
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.