Research | OneLook Acronym Finder |
Serial Number | 71579867 |
Registration Number | 0582374 |
Mark Drawing Code | 5S11: Illustration: Drawing with word(s)/letter(s)/number(s) in Stylized form |
Attorney Name | KATHY J. MCKNIGHT |
Law Office Assigned | 000 |
1928-08-22 | Date of First Use |
1949-06-02 | Application Filed |
1953-11-17 | Trademark Registered |
1993-11-17 | Renewal Date |
1994-10-11 | Location: FILE REPOSITORY (FRANCONIA) |
2004-08-21 | Status: Dead/Expired |
2018-07-07 | Transaction Date |
Owner: | ELECTRIC STEEL FOUNDRY |
Address | 2141 N.W. TWENTY-FIFTH AVENUE PORTLAND OR |
Legal Entity Type | Corporation |
Legal Entity State | OR |
Click the blue "Refresh" button to load certificates, specimines, application, and other documents.
International Codes: | 7 |
U.S. Codes: | 023 |
Type Code | Type |
---|---|
GS0231 | PULP MILL EQUIPMENT-NAMELY, DIGESTER CIRCULATING SYSTEMS AND PARTS THEREOF CONSISTING OF HEATER, PUMP, PIPE LINES, AND/OR DIGESTER; LOGGING EQUIPMENT-NAMELY, CHOKER RIGGING CONSISTING OF LINES, PULLEY BLOCK, BUTT HOOK, CHOKER HOOK, AND/OR FERRULE; MAIN LINE RIGGING CONSISTING OF HINGE LINK,SHACKLE, AND/OR THREE-WAY SWIVEL, LOG SKIDDING PANS, SKIDDING PAN HITCHES, SLED PLATES, LOGGING TRAILER LIFTING ATTACHMENTS; SAWMILL EQUIPMENT-NAMELY, [ NIGGER ] * LOG TURNER * BARS, LOG HAUL SLIP LINERS, LOG CONVEYOR FLIGHTS, LOG HAUL CHAIRS, LOG CONVEYOR CHAIN LOG AND CHIPPER ROTORS AND PARTS THEREOF, CONVEYOR DRUMS, LOG HAUL FOOT DRUMS, LOG HAUL IDLER DRUMS, LOADING ARMS, AND SAWMILL DECK MACHINERY AND PARTS THEREOF; DIPPER BUCKETS, ORANGE PEEL BUCKETS, HOE BUCKETS, CLAMSHELL BUCKETS, DRAGLINE BUCKETS, AND PARTS AND FITTINGS AND ACCESSORIES FOR THE SAME; DIGGER TEETH, DIGGER TOOTH POINTS, DIGGER TOOTH ADAPTERS, DRAGLINE BUCKET RIGGING CONSISTING OF DIPPER, CHAIN, CLEVIS, AND/OR PULLEY; CRUSHER JAWS, MANTLES, CONCAVES, LINERS, GRATES AND OTHER WEAR-RESISTING PARTS FOR ROCK CRUSHING MACHINES; WEAR RESISTANT METAL PLATES AND STRIPS ADAPTED TO BE WELDED TO BUCKET AND DIPPER TEETH AND TRACTOR TREADS TO ACCORD THEM WEAR-RESISTANT SURFACES, TRACTOR TRACK PADS AND SHOES; BLADES FOR BULLDOZERS AND TRAIL BUILDERS; BLADE CORNER BITS FOR BULLDOZERS AND OTHER EARTH MOVING MACHINES, GROUSER TIPS, POWER OPERATED VALVES, PULLEY BLOCKS, SPROCKETS, SPUR GEARS, BEVEL GEARS, MITRE GEARS, AND MARLIN SPIKES |
Description | Date | Event Coding |
---|---|---|
REGISTERED AND RENEWED (FIRST RENEWAL - 20 YRS) | 1973-11-17 | 1 REN1 R:Renewal |
REGISTERED - SEC. 9 FILED/CHECK RECORD FOR SEC. 8 | 1993-11-17 | 2 9.AF I:Incoming Correspondence |
SEC 7 REQUEST FILED | 1993-11-17 | 3 AMD7 I:Incoming Correspondence |
POST REGISTRATION ACTION MAILED - SEC. 9 | 1994-01-10 | 4 PRA9 O:Outgoing Correspondence |
AMENDMENT UNDER SECTION 7 - ISSUED | 1994-05-20 | 5 A7OK O:Outgoing Correspondence |
REGISTERED AND RENEWED (SECOND RENEWAL - 10 YRS) | 1994-07-20 | 6 RNL2 Q: |
CANCELLED SEC. 8 (10-YR)/EXPIRED SECTION 9 | 2004-08-21 | 7 CAEX O:Outgoing Correspondence |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.