XLO
Ex-cell-o Aircrart & Tool Corporation
Mark For: XLO® trademark registration is intended to cover the categories of
| Research |
OneLook
Acronym Finder
|
| Serial Number | 71336526 |
| Registration Number | 0306921 |
| Mark Literal Elements | XLO |
| Mark Drawing Type | 3 - AN ILLUSTRATION DRAWING WHICH INCLUDES WORD(S)/ LETTER(S)/NUMBER(S) |
| Mark Type | TRADEMARK |
| Standard Character Claim | No |
| Register | PRINCIPAL |
| Affidavit Text | SECT 12C. SECT 15. |
| Affidavit Text | 2ND RENEWAL 19731003 |
| Current Location | Not Found |
| Basis | 1(a) |
| Class Status | EXPIRED |
| Primary US Classes |
|
| Primary International Class |
|
| Filed Use | Yes |
| Current Use | Yes |
| Intent To Use | No |
| Filed ITU | No |
| 44D Filed | No |
| 44E Current | No |
| 66A Current | No |
| Current Basis | No |
| No Basis | No |
| Law Office Assigned | 000 |
Timeline
| 1920-01-00 | Date of First Use |
| 1920-01-01 | Date of First Use |
| 1920-01-01 | Date of Use In Commerce |
| 1933-04-07 | Application Filed |
| 1933-10-03 | Trademark Registered |
| 1955-04-12 | Published |
| 1955-04-12 | Republished 12(c) |
| 1973-10-03 | Renewal Date |
| 1994-07-11 | Status: Dead/Expired |
| 1994-07-11 | Status: This registration was not renewed and therefore has expired. |
| 2018-07-07 | Transaction Date |
| 2ND RENEWAL 19731003 | Renewal Date |
Trademark Parties (Applicants & Owners)
| Party: |  EX-CELL-O AIRCRART & TOOL CORPORATION |
| Address | 1200 OAKMAN BLVD DETROIT, MICHIGAN UNITED STATES |
| Legal Entity Type | Corporation |
| Legal Entity State | MICHIGAN |
| Party: | EX-CELL-O AIRCRART & TOOL CORPORATION |
| Address | 1200 OAKMAN BLVD DETROIT MI |
| Legal Entity Type | |
| Legal Entity State | MI |
*multiple parties listed, check assignment documents for ownership information
Documents
 Registration Certificate | TIFF | 1933-10-03 |
Design Search Codes
| 260302 | Ovals, plain single line; Plain single line ovals |
Attorney of Record
Good, Services, and Codes
(EXPIRED)
IC 006 007. US 023. G & S: AUTOMAT
IC SCREW MACHINE PRODUCTS SUCH AS SCREWS, BOLTS, SHAFTS, PINS, BUSHINGS, CLEVIS PINS, AND SUCH PARTS WHICH ARE COMMONLY PRODUCED ON SINGLE OR MULTIPLE SPINDLE AUTOMAT
IC SCREW MACHINES; CLASP BRAKE PINS AND BUSHINGS, PRECISION AIRCRAFT ENGINE PARTS, INTERNAL GRINDING SPINDLES, ((DIAMOND)) BORING MACHINES, DIESEL FUEL PUMP PARTS, DRILL JIG BUSHINGS, TOOL DETAIL PARTS SUCH AS JAWS, REST PADS, LOCATING PINS, SHAFTS, PINS BUSHINGS, AND FIXTURES WHICH ARE FREQUENTLY REPLACED OR USUALLY MANUFACTURED IN QUANTITY LOTS; TOOL GRINDING AND LAPPING MACHINE, FUEL INJECTION ((SYSTEMS SUCH AS PUMPS FOR INJECTING OIL, GASOLINE, OR OTHER FUEL, UNDER PRESSURE, INTO INTERNAL COMBUSTION ENGINES, AND INCLUDING THEREWITH MEANS FOR DISTRIBUTING THE FUEL TO MULTIPLE CYLINDERS OF AN ENGINE, COMPLETE WITH NECESSARY CONTROLS, ETC.;)) MULTIPLE DRILLING EQUIPMENT SUCH AS MACHINES FOR DRILLING A MULTIPLICITY OF HOLES SIMULTANEOUSLY OR IN SEQUENCE BUT REQUIRING A GROUP OF DRILLING SPINDLES TO PERFORM THE OPERATION (SPINDLES MAY BE ARRANGED VERTICALLY, HORIZONTALLY, OR AT AN ANGLE OR ANY COMBINATION THEREOF), ALSO INCLUDES MULTIPLE DRILL HEADS WHICH CONSIST OF A GROUP OF DRILL SPINDLES SUPPORTED AND DRIVEN FROM A SINGLE DRILL SPINDLE OR SHAFT. SHEET METAL DIES, JIGS AND FIXTURES, TUNGSTEN CARBIDE TIPPED TOOLS SUCH AS METAL CUTTING TOOLS, SUCH AS TOOL BITS FOR A LATHE, DRILLS, REAMERS, SAWS, MILLING CUTTERS, FORM TOOLS, ETC., THE BODY OF SUCH TOOLS BEING MADE OF STEEL BUT THE PORTION OF THE TOOLS ADJACENT THE CUTTING EDGE WHERE THE WEAR IS MOST PRONOUNCED AND DESTRUCTIVE BEING MADE OF TUNGSTEN CARBIDE, WHICH IS USUALLY BRAZED INTO PLACE IN THE BODY OF THE TOOL; INSERTED TOOTH MILLING CUTTERS, STANDARD MILLING CUTTERS,GEAR SHAPER CUTTERS, BROACHING FIXTURES, COUNTERBORE SETS, SPECIAL TOOLS SUCH AS ARBORS, CUTTERS, REAMERS, JIGS, FIXTURES, DIES, ETC., WHICH ARE NOT USUALLY MADE IN ANY QUANTITY AND CARRIED IN STOCK BY THE MANUFACTURER OR DEALER AS STANDARD TOOLS BUT ARE DESIGNED AND BUILT FOR ONE SPECIAL PURPOSE ONLY; COUNTERBORES, FORM TOOLS SUCH AS CUTTING TOOLS FOR USE ON A LATHE OR SCREW MACHINE, THE CUTTING EDGES OF THE TOOLS USUALLY BEING IRREGULARLY SHAPED OR "FORMED" SO AS TO PRODUCE A SIMILARLY "FORMED" PIECE OF WORK WITH ONE PASS OF THE TOOL EITHER OVER THE WORK OR INTO THE WORK AS THE PART BEING OPERATED UPON MAY REQUIRE; CORE DRILLS, BROACHES, AND REAMERS. FIRST USE: 19200100. FIRST USE IN COMMERCE: 19200100
| International Codes: | 6 |
| U.S. Codes: | 023 |
| Type Code | Type |
|---|---|
| PM0001 | EXCELO |
Related Filings
| Mark | Serial Number | Relationship Number |
|---|---|---|
| Symbol/Image | 0194682 |
Trademark Filing History
| Description | Date | Proceeding Number |
|---|---|---|
| EXPIRED SEC. 9 | 1994-07-11 | |
| REGISTERED AND RENEWED (SECOND RENEWAL - 20 YRS) | 1973-10-03 |
Similar Marks
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
| 