Wood; Roy L.
Patent Applications and Registrations
Patent applications and USPTO patent grants for Wood; Roy L..The latest application filed is for "control object positioning using an optimum jerk profile to reduce excitation of mechanical resonances".
- Wood; Roy L. - Yukon OK
| Patent | Date |
|---|---|
| Control object positioning using an optimum jerk profile to reduce excitation of mechanical resonances Grant 6,850,386 - Kovinskaya , et al. February 1, 2 | 2005-02-01 |
| Actuator stop Grant 6,826,019 - Misso , et al. November 30, 2 | 2004-11-30 |
| Adapting logical track addresses in relation to head offsets Grant 6,775,090 - DuLaney , et al. August 10, 2 | 2004-08-10 |
| Moveable outer stop Grant 6,680,823 - Wood , et al. January 20, 2 | 2004-01-20 |
| Actuator with discrete molded in bumper stop Grant 6,650,507 - Nelson , et al. November 18, 2 | 2003-11-18 |
| Parallel spring design for acoustic damping of a disc drive Grant 6,603,633 - Heaton , et al. August 5, 2 | 2003-08-05 |
| Compressive spring sleeve for reducing disc slippage Grant 6,603,634 - Wood , et al. August 5, 2 | 2003-08-05 |
| Control object positioning using an optimum jerk profile to reduce excitation of mechanical resonances App 20030067710 - Kovinskaya, Svetlana I. ; et al. | 2003-04-10 |
| Actuator stop App 20030002223 - Misso, Nigel Frank ; et al. | 2003-01-02 |
| Independent clamping spacers in a disc drive assembly Grant 6,462,902 - Luo , et al. October 8, 2 | 2002-10-08 |
| Parallel spring design for acoustic damping of a disc drive App 20020135945 - Heaton, Daniel M. ; et al. | 2002-09-26 |
| Voice coil motor attachment for a hard disc assembly App 20020092153 - Eckerd, Steve S. ; et al. | 2002-07-18 |
| Moveable outer stop App 20020093770 - Wood, Roy L. ; et al. | 2002-07-18 |
| Inertial spring latch assembly in a disc drive App 20020054456 - Misso, Nigel F. ; et al. | 2002-05-09 |
| Compressive limit stop in a disc drive App 20020044388 - Misso, Nigel F. ; et al. | 2002-04-18 |
| Actuator arm with tapered trailing edge and recessed head conductor Grant 6,366,432 - Tadepalli , et al. April 2, 2 | 2002-04-02 |
| Actuator with discrete molded in bumper stop App 20020012203 - Nelson, Eldon Leroy ; et al. | 2002-01-31 |
| Individually tuned isolation devices for a disc drive base deck Grant 6,275,352 - Tadepalli , et al. August 14, 2 | 2001-08-14 |
| Statically and dynamically balancing a three-disc disc stack assembly Grant 6,178,063 - Wood , et al. January 23, 2 | 2001-01-23 |
| Adapting seek velocity profile to destination track location Grant 6,169,382 - McKenzie , et al. January 2, 2 | 2001-01-02 |
| Resonance dampening actuator bearing assembly Grant 6,163,441 - Wood , et al. December 19, 2 | 2000-12-19 |
| Rotational vibration detection using a velocity sense coil Grant 6,088,185 - Ratliff , et al. July 11, 2 | 2000-07-11 |
| Balancing system for a disc drive disc assembly Grant 5,555,144 - Wood , et al. September 10, 1 | 1996-09-10 |
| Compression contact electrical connector assembly for a disc drive Grant 5,064,377 - Wood November 12, 1 | 1991-11-12 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
| 