loadpatents
Patent applications and USPTO patent grants for Wells; Allan R..The latest application filed is for "fuel injector".
Patent | Date |
---|---|
Fuel injector Grant 11,352,992 - Hardouin , et al. June 7, 2 | 2022-06-07 |
Fuel Injector App 20210246859 - HARDOUIN; GHISLAIN ;   et al. | 2021-08-12 |
Valve Seat For Gaseous Fuel Injector App 20150014448 - FUJITA; MAHORO M. ;   et al. | 2015-01-15 |
Valve Seat For Gaseous Fuel Injector App 20110186654 - Fujita; Mahoro M. ;   et al. | 2011-08-04 |
Silicone seal for bipolar plates in a PEM fuel cell Grant 7,686,854 - Wells , et al. March 30, 2 | 2010-03-30 |
Injector Fuel Filter With Built-In Orifice for Flow Restriction App 20100038459 - Wells; Allan R. ;   et al. | 2010-02-18 |
Injector fuel filter with built-in orifice for flow restriction Grant 7,617,991 - Wells , et al. November 17, 2 | 2009-11-17 |
PEM fuel cell assembly formed of modular sub-assemblies Grant 7,595,126 - Wells , et al. September 29, 2 | 2009-09-29 |
Fuel injector lower filter App 20090236448 - Burkhard; Kimberly ;   et al. | 2009-09-24 |
Internal lower fuel injector filter App 20090121049 - Flynn; Vicki A. ;   et al. | 2009-05-14 |
Fuel injector rail assembly for direct injection of fuel Grant 7,347,190 - Keegan , et al. March 25, 2 | 2008-03-25 |
Dual stroke injector using SMA App 20070235554 - Williams; Arthur R. ;   et al. | 2007-10-11 |
Injector fuel filter with built-in orifice for flow restriction App 20070227984 - Wells; Allan R. ;   et al. | 2007-10-04 |
Fabricated fuel rail assembly for direct injection of fuel Grant 7,159,569 - Keegan , et al. January 9, 2 | 2007-01-09 |
Fabricated fuel rail assembly for direct injection of fuel App 20060254563 - Keegan; Kevin R. ;   et al. | 2006-11-16 |
Method of forming a gasket assembly for a PEM fuel cell assembly App 20060236535 - Williams; Arthur R. ;   et al. | 2006-10-26 |
Method of forming a gasket assembly for a PEM fuel cell assembly Grant 7,104,545 - Williams , et al. September 12, 2 | 2006-09-12 |
Process for forming an integral gasket on a bipolar plate for a PEM fuel cell Grant 7,001,686 - Wells , et al. February 21, 2 | 2006-02-21 |
PEM fuel cell assembly formed of modular sub-assemblies App 20050112442 - Wells, Allan R. ;   et al. | 2005-05-26 |
Silicone seal for bipolar plates in a PEM fuel cell App 20040231142 - Wells, Allan R. ;   et al. | 2004-11-25 |
Method of forming a gasket assembly for a PEM fuel cell assembly App 20040160019 - Williams, Arthur R. ;   et al. | 2004-08-19 |
Silicone seal for bipolar plates in a PEM fuel cell App 20040101735 - Wells, Allan R. ;   et al. | 2004-05-27 |
Process for forming an integral gasket on a bipolar plate for a PEM fuel cell App 20040062976 - Wells, Allan R. ;   et al. | 2004-04-01 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.