Thrash; Patrick J.

Patent Applications and Registrations

Patent applications and USPTO patent grants for Thrash; Patrick J..The latest application filed is for "system and method for producing a three-dimensional dry fiber preform".

Company Profile

0.14.8

Thrash; Patrick J. - Eastvale CA
Thrash; Patrick J. - Corona CA
Thrash; Patrick J. - Huntington Beach CA

*profile and listings may contain filings by different individuals or companies with the same name. Review application materials to confirm ownership/assignment.

Patent Activity

Patent	Date
System and method for producing a three-dimensional dry fiber preform Grant 9,278,826 - Thrash , et al. March 8, 2	2016-03-08
System And Method For Producing A Three-dimensional Dry Fiber Preform App 20140360417 - THRASH; Patrick J. ; et al.	2014-12-11
System of composite armor including release layers Grant 8,906,484 - Black, Jr. , et al. December 9, 2	2014-12-09
Composite fabric with rigid member structure Grant 8,728,263 - Velicki , et al. May 20, 2	2014-05-20
Method and apparatus for low-bulk toughened fabrics for low-pressure molding processes Grant 8,361,262 - Tsotsis , et al. January 29, 2	2013-01-29
Unitized engine nacelle structure Grant 8,220,588 - Thrash , et al. July 17, 2	2012-07-17
Composite Fabric with Rigid Member Structure App 20110287208 - Velicki; Alexander ; et al.	2011-11-24
Resin infusion mold tool system and vacuum assisted resin transfer molding with subsequent pressure bleed Grant 8,057,721 - Thrash , et al. November 15, 2	2011-11-15
Composite fabric with rigid member structure Grant 8,042,767 - Velicki , et al. October 25, 2	2011-10-25
Unitized Engine Nacelle Structure App 20110244150 - Thrash; Patrick J. ; et al.	2011-10-06
Resin Infusion Mold Tool System And Vacuum Assisted Resin Transfer Molding With Subsequent Pressure Bleed App 20100276828 - Thrash; Patrick J. ; et al.	2010-11-04
Method And Apparatus For Low-bulk Toughened Fabrics For Low-pressure Molding Processes App 20090120562 - Tsotsis; Thomas Karl ; et al.	2009-05-14
Composite Fabric With Rigid Member Structure App 20090057487 - Velicki; Alexander ; et al.	2009-03-05
Resin infusion mold tool system and vacuum assisted resin transfer molding with subsequent pressure bleed Grant 7,413,695 - Thrash , et al. August 19, 2	2008-08-19
Resin infusion mold tool system and vacuum assisted resin transfer molding with subsequent pressure bleed Grant 6,840,750 - Thrash , et al. January 11, 2	2005-01-11
Resin infusion mold tool system and vacuum assisted resin transfer molding with subsequent pressure bleed App 20040135294 - Thrash, Patrick J. ; et al.	2004-07-15
Resin infusion mold tool system and vacuum assisted resin transfer molding with subsequent pressure bleed App 20020185785 - Thrash, Patrick J. ; et al.	2002-12-12
Table-driven software architecture for a stitching system Grant 6,198,983 - Thrash , et al. March 6, 2	2001-03-06
Automated gantry-type stitching system Grant 5,915,317 - Thrash , et al. June 29, 1	1999-06-29

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.