loadpatents
Patent applications and USPTO patent grants for Straus; Elliott J..The latest application filed is for "pressure and temperature guidance in an in-mold coating process".
Patent | Date |
---|---|
Method and system for in-mold coating flow simulation Grant 7,257,520 - Castro , et al. August 14, 2 | 2007-08-14 |
In-mold coating barrier for a substrate injection orifice Grant 7,105,231 - McBain , et al. September 12, 2 | 2006-09-12 |
Pressure and temperature guidance in an in-mold coating process App 20060125151 - McBain; Douglas S. ;   et al. | 2006-06-15 |
In-mold coating injection inlet flow control Grant 7,045,213 - Straus May 16, 2 | 2006-05-16 |
Method and system for in-mold coating flow simulation App 20050246146 - Castro, Jose M. ;   et al. | 2005-11-03 |
Selectively controlling in-mold coating flow Grant 6,890,469 - Straus , et al. May 10, 2 | 2005-05-10 |
Removable defined flange for in-mold coating containment Grant 6,887,550 - Straus , et al. May 3, 2 | 2005-05-03 |
Optimization of in-mold coating injection molded thermoplastic substrates Grant 6,793,861 - McBain , et al. September 21, 2 | 2004-09-21 |
Modeling method and program for in-mold coating an injection molded thermoplastic article App 20040148051 - Straus, Elliott J. | 2004-07-29 |
Method for in-mold coating a polyolefin article App 20040071980 - McBain, Douglas S. ;   et al. | 2004-04-15 |
Method for in-mold coating a polyolefin article Grant 6,617,033 - Straus , et al. September 9, 2 | 2003-09-09 |
Removable defined flange for in-mold coating containment App 20030099809 - Straus, Elliott J. ;   et al. | 2003-05-29 |
Method of molding a panel App 20030090035 - Mori, Steven J. ;   et al. | 2003-05-15 |
Selectively controlling in-mold coating flow App 20030082344 - Straus, Elliott J. ;   et al. | 2003-05-01 |
In-mold coating barrier for a substrate injection orifice App 20030077425 - McBain, Douglas S. ;   et al. | 2003-04-24 |
In-mold coating injection inlet flow control App 20030077426 - Straus, Elliott J. | 2003-04-24 |
Method for in-mold coating a polyolefin article App 20020171171 - Straus, Elliott J. ;   et al. | 2002-11-21 |
Optimization of in-mold coating injection molded thermoplastic substrates App 20020039656 - McBain, Douglas S. ;   et al. | 2002-04-04 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.