Sigler; Laurent Christel

Patent Applications and Registrations

Patent applications and USPTO patent grants for Sigler; Laurent Christel.The latest application filed is for "preform suitable for blow-molding into a final shaped container".

Company Profile

0.10.10

Sigler; Laurent Christel - Hettange-Grande N/A FR

*profile and listings may contain filings by different individuals or companies with the same name. Review application materials to confirm ownership/assignment.

Patent Activity

Patent	Date
Preform suitable for blow-molding into a final shaped container Grant 9,034,446 - Witz , et al. May 19, 2	2015-05-19
Tonnage regulating structure and a mold incorporating same Grant 8,348,657 - Mai , et al. January 8, 2	2013-01-08
Preform Suitable For Blow-molding Into A Final Shaped Container App 20120308841 - Witz; Jean-Christophe ; et al.	2012-12-06
Preform and a mold stack for producing the preform Grant 8,241,718 - Witz , et al. August 14, 2	2012-08-14
Support ledge of a preform Grant D644,536 - Witz , et al. September 6, 2	2011-09-06
Tonnage Regulating Structure And A Mold Incorporating Same App 20110212215 - Mai; Arnold ; et al.	2011-09-01
Preform and a mold stack for producing the preform Grant 7,897,222 - Witz , et al. March 1, 2	2011-03-01
Preform And A Mold Stack For Producing The Preform App 20100326947 - Witz; Jean-Christophe ; et al.	2010-12-30
Preform And A Mold Stack For Producing The Preform App 20100260886 - Witz; Jean-Christophe ; et al.	2010-10-14
Mold stack Grant 7,628,605 - Mai , et al. December 8, 2	2009-12-08
Compensating retaining member for use with a molding system Grant 7,597,551 - Mai , et al. October 6, 2	2009-10-06
Compensating core for use with a molding system Grant 7,588,439 - Mai , et al. September 15, 2	2009-09-15
Compensating mold stack for use in a molding system Grant 7,575,429 - Mai , et al. August 18, 2	2009-08-18
Preform and a Mold Stack for Producing the Preform App 20090155501 - WITZ; Jean-Christophe ; et al.	2009-06-18
Mold Stack, a Molding System Incorporating Same and a Method of Aligning the Mold Stack App 20090020915 - MAI; Arnold ; et al.	2009-01-22
Compensating Mold Stack, A Molding System Incorporating Same and a Method of Aligning the Compensating Mold Stack App 20090022844 - Mai; Arnold ; et al.	2009-01-22
Compensating Retaining Member for Use with a Molding System and the Molding System Incorporating Same App 20090022845 - Mai; Arnold ; et al.	2009-01-22
Compensating Core for Use with a Molding System and the Molding System Incorporating Same App 20090022843 - MAI; Arnold ; et al.	2009-01-22
Molded Article, A Mold Insert for Producing the Molded Article and a Method of Manufacturing of the Mold Insert App 20090011157 - Sigler; Laurent Christel ; et al.	2009-01-08

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.