SIEPER; Gunter

Patent Applications and Registrations

Patent applications and USPTO patent grants for SIEPER; Gunter.The latest application filed is for "plastic plug-in connector and method for producting it".

Company Profile

0.8.11

SIEPER; Gunter - Remscheid DE

*profile and listings may contain filings by different individuals or companies with the same name. Review application materials to confirm ownership/assignment.

Patent Activity

Patent	Date
Plastic Plug-in Connector And Method For Producting It App 20200164553 - SIEPER; Gunter ; et al.	2020-05-28
Plug connection for fluid lines and retaining part for such a plug connection Grant 9,845,907 - Hess , et al. December 19, 2	2017-12-19
At least partially heatable line-connector for a heatable media line, and an assembled media line comprising such a line-connector Grant 9,791,086 - De Beer , et al. October 17, 2	2017-10-17
Molded hollow cylinder with a thread and process for its manufacture Grant 9,090,035 - De Beer , et al. July 28, 2	2015-07-28
Method for producing a screw part with an annular cross-section Grant 9,023,260 - Sieper , et al. May 5, 2	2015-05-05
At Least Partially Heatable Line-connector For A Heatable Media Line, And An Assembled Media Line Comprising Such A Line-connector App 20140230941 - De Beer; Daniel ; et al.	2014-08-21
Plug Connection for Fluid Lines and Retaining Part for Such a Plug Connection App 20140210202 - Hess; Jochem-Andreas ; et al.	2014-07-31
Plug Connection For Fluid Lines And Retaining Part For Such A Plug Connection App 20130313820 - He ; Jochem-Andreas ; et al.	2013-11-28
Electrically heatable media line and line connector Grant 8,591,241 - Rosenfeldt , et al. November 26, 2	2013-11-26
Molded hollow cylinder with a thread and process for its manufacture App 20130240528 - De Beer; Daniel ; et al.	2013-09-19
Connector device for media conduits Grant 8,196,970 - Brandt , et al. June 12, 2	2012-06-12
Electrically Heatable Media Line And Line Connector App 20120100735 - Rosenfeldt; Sascha ; et al.	2012-04-26
Method For Producing A Moulded Part With An Annular Cross-section And Moulded Part Produced According To A Method Of This Type App 20110150602 - Sieper; Gunter ; et al.	2011-06-23
Connector Device for Media Conduits App 20080277923 - Brandt; Josef ; et al.	2008-11-13

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.