loadpatents
Patent applications and USPTO patent grants for SCHLEINKOFER; UWE.The latest application filed is for "clamping block for receiving a parting blade".
Patent | Date |
---|---|
Clamping Block For Receiving A Parting Blade App 20210299757 - GOEBERL; CHRISTIAN ;   et al. | 2021-09-30 |
Machining Tool App 20190119794 - TOUFAR; CHRISTINE ;   et al. | 2019-04-25 |
Machining Tool App 20190024221 - TOUFAR; CHRISTINE ;   et al. | 2019-01-24 |
Cutting insert for machining Grant 10,040,138 - Burtscher , et al. August 7, 2 | 2018-08-07 |
Drill cutting insert Grant 9,586,271 - Prast , et al. March 7, 2 | 2017-03-07 |
Cutting tool Grant 8,950,983 - Burtscher , et al. February 10, 2 | 2015-02-10 |
Tool for machining Grant RE45,154 - Wallgram , et al. September 23, 2 | 2014-09-23 |
Drill Cutting Insert App 20140212235 - Prast; Josef ;   et al. | 2014-07-31 |
Cutting insert for a cutting tool Grant 8,702,354 - Schleinkofer , et al. April 22, 2 | 2014-04-22 |
Cutting Insert For Machining App 20130330135 - Burtscher; Peter ;   et al. | 2013-12-12 |
Coated article Grant 8,388,709 - Wallgram , et al. March 5, 2 | 2013-03-05 |
Cutting Insert For A Cutting Tool App 20120198973 - Schleinkofer; Uwe ;   et al. | 2012-08-09 |
Cutting Tool App 20120082521 - Burtscher; Peter ;   et al. | 2012-04-05 |
Tool for machining Grant 8,021,757 - Wallgram , et al. September 20, 2 | 2011-09-20 |
Coated Article App 20100279093 - Wallgram; Wolfgang ;   et al. | 2010-11-04 |
Cutting insert and tool and wrench for using the same Grant 7,341,433 - Berger , et al. March 11, 2 | 2008-03-11 |
Tool for machining App 20070254173 - Wallgram; Wolfgang ;   et al. | 2007-11-01 |
Cutting insert and tool and wrench for using the same App 20070065240 - Berger; Dietmar ;   et al. | 2007-03-22 |
Milling tool Grant 6,942,433 - Schleinkofer , et al. September 13, 2 | 2005-09-13 |
Milling Tool App 20040253062 - Schleinkofer, Uwe ;   et al. | 2004-12-16 |
Cermet having a binder with improved plasticity Grant 6,024,776 - Heinrich , et al. February 15, 2 | 2000-02-15 |
Cutting insert of a cermet having a Co-Ni-Fe-binder Grant 6,010,283 - Henrich , et al. January 4, 2 | 2000-01-04 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.