loadpatents
Patent applications and USPTO patent grants for SANCHEZ-GOMEZ; Jose.The latest application filed is for "method for manufacturing a part".
Patent | Date |
---|---|
Method For Manufacturing A Part App 20210299947 - BUTRAGUENO-MARTINEZ; Asuncion ;   et al. | 2021-09-30 |
Three-dimensional Printing Using A Filament Of Thermoplastic Material And A Conductive Fiber App 20210138722 - BUTRAGUENO-MARTINEZ; Asuncion ;   et al. | 2021-05-13 |
Structural composite component and method for configuring a structural composite component Grant 10,773,824 - Blanco Varela , et al. Sept | 2020-09-15 |
Method For Printed Cable Installation In Harness Systems For Aircrafts App 20190386474 - RODEGHIERO; Alain ;   et al. | 2019-12-19 |
System for out of autoclave bonded repairs Grant 10,189,123 - Rodriguez Bellido , et al. Ja | 2019-01-29 |
Method for obtaining a composite laminate Grant 10,040,258 - Sanchez Gomez , et al. August 7, 2 | 2018-08-07 |
Structural Composite Component And Method For Configuring A Structural Composite Component App 20180155055 - Blanco Varela; Tamara ;   et al. | 2018-06-07 |
System For Out Of Autoclave Bonded Repairs App 20170095894 - RODRIGUEZ BELLIDO; Ana ;   et al. | 2017-04-06 |
Method For Obtaining A Composite Laminate App 20150314539 - Sanchez Gomez; Jose ;   et al. | 2015-11-05 |
Aircraft with a rear fuselage protection shield Grant 8,371,530 - Bautista De La Llave , et al. February 12, 2 | 2013-02-12 |
Process of manufacturing composite structures with embedded precured tools Grant 8,197,625 - Garate Fel , et al. June 12, 2 | 2012-06-12 |
Aircraft with a Rear Fuselage Protection Shield App 20100059627 - Bautista De La Llave; Cesar ;   et al. | 2010-03-11 |
Process of manufacturing composite structures with embedded precured tools App 20070151657 - Garate Fel; Enrique ;   et al. | 2007-07-05 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.