loadpatents
Patent applications and USPTO patent grants for Ohara; Toshio.The latest application filed is for "heat exchanger".
Patent | Date |
---|---|
Heat exchanger App 20060237178 - Katoh; Yoshiki ;   et al. | 2006-10-26 |
Refrigerant evaporator with condensed water drain structure Grant 6,308,527 - Kuroyanagi , et al. October 30, 2 | 2001-10-30 |
Refrigerant evaporator and manufacturing method for the same Grant 6,272,881 - Kuroyanagi , et al. August 14, 2 | 2001-08-14 |
Core unit of heat exchanger having electric heater Grant 6,178,292 - Fukuoka , et al. January 23, 2 | 2001-01-23 |
Refrigerant evaporator Grant 5,651,268 - Aikawa , et al. July 29, 1 | 1997-07-29 |
Method of manufacturing continuous fiber-reinforced thermoplastic prepregs Grant 5,529,652 - Asai , et al. June 25, 1 | 1996-06-25 |
Refrigerant evaporator Grant 5,448,899 - Ohara , et al. September 12, 1 | 1995-09-12 |
Laminate-type heat exchanger Grant 5,222,551 - Hasegawa , et al. June 29, 1 | 1993-06-29 |
Vapor pressure-adjusting valve and refrigeration system using same Grant 4,936,108 - Ogawa , et al. June 26, 1 | 1990-06-26 |
Vapor pressure-adjusting valve and refrigeration system using same Grant 4,870,834 - Ogawa , et al. October 3, 1 | 1989-10-03 |
Aluminum heat exchanger and method for producing aluminum heat exchanger Grant 4,830,101 - Ohara , et al. May 16, 1 | 1989-05-16 |
Process of producing lightweight and corrosion-resistant heat exchanger Grant 4,732,311 - Hasegawa , et al. March 22, 1 | 1988-03-22 |
Plate-type heat exchanger Grant 4,696,342 - Yamauchi , et al. September 29, 1 | 1987-09-29 |
Flat, multi-luminal tube for cross-flow-type indirect heat exchanger, having greater outer wall thickness towards side externally subject to corrosive inlet gas such as wet, salty air Grant 4,570,700 - Ohara , et al. February 18, 1 | 1986-02-18 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.