Lee; Brett J.

Patent Applications and Registrations

Patent applications and USPTO patent grants for Lee; Brett J..The latest application filed is for "rotating multimode clutch module for all wheel drive system".

Company Profile

1.6.7

Lee; Brett J. - Portland OR
Lee; Brett J. - Southfield MI
Lee; Brett J. - Fenton MI

*profile and listings may contain filings by different individuals or companies with the same name. Review application materials to confirm ownership/assignment.

Patent Activity

Patent	Date
Rotating multimode clutch module for all wheel drive system Grant 11,125,281 - Peglowski , et al. September 21, 2	2021-09-21
Rotating Multimode Clutch Module For All Wheel Drive System App 20190063513 - PEGLOWSKI; Brett M. ; et al.	2019-02-28
Multi-mode clutches for forward/reverse planetary gearset Grant 10,145,426 - Lee , et al. De	2018-12-04
Driveline Disconnect Using Multimode Clutches App 20180154772 - BLAIR; CHRISTOPHER E. ; et al.	2018-06-07
Integrated actuator for multi-mode clutch module Grant 9,897,150 - Lee , et al. February 20, 2	2018-02-20
Heat Exchanger And Storage Device For Cold Vehicle Startup With Regenerative Capability App 20170248375 - BLAIR; Christopher E. ; et al.	2017-08-31
Multi-mode Clutches For Forward/reverse Planetary Gearset App 20160003308 - LEE; Brett J. ; et al.	2016-01-07
Multimode clutch for a parallel hybrid vehicle Grant 9,108,615 - Lee , et al. August 18, 2	2015-08-18
Integrated Actuator For Multi-mode Clutch Module App 20150176662 - LEE; Brett J. ; et al.	2015-06-25
Multimode Clutch for a Parallel Hybrid Vehicle App 20150080174 - Lee; Brett J. ; et al.	2015-03-19
System for indirectly measuring a geometric dimension related to an opening in an apertured exterior surface of a part based on direct measurements of the part when fixtured at a measurement station Grant 8,004,694 - Lee , et al. August 23, 2	2011-08-23
System For Indirectly Measuring A Geometric Dimension Related To An Opening In An Apertured Exterior Surface of A Part Based On Direct Measurements Of The Part When Fixtured At A Measurement Station App 20100245850 - Lee; Brett J. ; et al.	2010-09-30
Method and system for inspecting manufactured parts and sorting the inspected parts Grant 7,403,872 - St. Onge , et al. July 22, 2	2008-07-22

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.