Patent | Date |
---|
Self-aligned method for fabricating a high density GMR read element Grant 8,104,166 - Zhang , et al. January 31, 2 | 2012-01-31 |
Fabricating magnetic read heads with a reduced scratch exposure region Grant 7,882,618 - Druist , et al. February 8, 2 | 2011-02-08 |
Method for fabricating magnetoresistive read head having a bias structure with at least one dusting layer Grant 7,691,434 - Zhang , et al. April 6, 2 | 2010-04-06 |
Magnetic sensor with underlayers promoting high-coercivity, in-plane bias layers Grant 7,639,457 - Chen , et al. December 29, 2 | 2009-12-29 |
Fabricating Magnetic Read Heads With A Reduced Scratch Exposure Region App 20090151151 - Druist; David P. ;   et al. | 2009-06-18 |
Write element with recessed pole and heat sink layer for ultra-high density writing Grant 7,522,379 - Krounbi , et al. April 21, 2 | 2009-04-21 |
Method of fabricating thin film write heads with a shortened yoke and improved dimension control Grant 7,386,933 - Krounbi , et al. June 17, 2 | 2008-06-17 |
Write element with reduced yoke length for ultra-high density writing Grant 7,379,269 - Krounbi , et al. May 27, 2 | 2008-05-27 |
Magnetoresistive read head having a bias structure with at least one dusting layer Grant 7,342,752 - Zhang , et al. March 11, 2 | 2008-03-11 |
Magnetic recording head with high saturation magnetic flux density CoNiFe thin film composition Grant 7,333,295 - Medina , et al. February 19, 2 | 2008-02-19 |
GMR sensor with shallow contiguous junction and bias layers aligned with free sensor layers Grant 7,286,329 - Chen , et al. October 23, 2 | 2007-10-23 |
Magnetic write head having resistive heater coil Grant 7,283,327 - Liu , et al. October 16, 2 | 2007-10-16 |
Method of using a magnetic write head having an internal heater Grant 7,092,195 - Liu , et al. August 15, 2 | 2006-08-15 |
Thin film recording head with a buried coil providing a shortened yoke and improved dimension control Grant 7,006,327 - Krounbi , et al. February 28, 2 | 2006-02-28 |
Thin film write head having a laminated, flat top pole with bottom shaper and method of fabrication Grant 6,975,486 - Chen , et al. December 13, 2 | 2005-12-13 |
Thin film recording head with a buried coil providing a shortened yoke and improved dimension control App 20040169958 - Krounbi, Mohamad T. ;   et al. | 2004-09-02 |
Magnetically soft, high saturation magnetization laminates of iron-cobalt-nitrogen and iron-nickel Grant 6,778,358 - Jiang , et al. August 17, 2 | 2004-08-17 |
Inductive transducer with reduced pole tip protrusion Grant 6,751,055 - Alfoqaha , et al. June 15, 2 | 2004-06-15 |
Preamplifier circuit configurable to allow simultaneous read and write operations for self-servo writing a disk drive Grant 6,693,760 - Krounbi , et al. February 17, 2 | 2004-02-17 |
Thin film write head having a laminated, flat top pole with bottom shaper and method of fabrication App 20040027716 - Chen, Yingjian ;   et al. | 2004-02-12 |
Self-servo writing a disk drive by propagating interleaved sets of timing clocks and servo bursts during alternate time intervals Grant 6,600,620 - Krounbi , et al. July 29, 2 | 2003-07-29 |
Azo dyes as adhesion promotion additive in polydimethylglutarimide Grant 5,604,073 - Krounbi , et al. February 18, 1 | 1997-02-18 |
Lapping process for a single element magnetoresistive head Grant 5,588,199 - Krounbi , et al. December 31, 1 | 1996-12-31 |
Peak enhanced magnetoresistive read transducer Grant 5,581,427 - Feng , et al. December 3, 1 | 1996-12-03 |
Multi-layer conductor leads in a magnetoresistive head Grant 5,491,600 - Chen , et al. February 13, 1 | 1996-02-13 |
Method of fabricating a magnetoresistive read transducer Grant 5,458,908 - Krounbi , et al. October 17, 1 | 1995-10-17 |
Close packed magnetic head linear array Grant 5,452,165 - Chen , et al. September 19, 1 | 1995-09-19 |
Method of making a thin film merged MR head with aligned pole tips Grant 5,438,747 - Krounbi , et al. August 8, 1 | 1995-08-08 |
Submicron thin film inductive head with self-aligned staggered pole-tips Grant 5,375,023 - Ju , et al. December 20, 1 | 1994-12-20 |
Thin film magnetic head with conformable pole tips Grant 5,285,340 - Ju , et al. February 8, 1 | 1994-02-08 |
Magnetoresistive read transducer having improved bias profile Grant 5,285,339 - Chen , et al. February 8, 1 | 1994-02-08 |
Method of making a magnetoresistive read transducer having hard magnetic bias Grant 5,079,035 - Krounbi , et al. January 7, 1 | 1992-01-07 |
Magnetoresistive sensor with track following capability Grant 5,079,663 - Ju , et al. January 7, 1 | 1992-01-07 |
Magnetoresistive read transducer having hard magnetic bias Grant 5,018,037 - Krounbi , et al. May 21, 1 | 1991-05-21 |
Magnetoresistive read transducer having hard magnetic shunt bias Grant 5,005,096 - Krounbi , et al. April 2, 1 | 1991-04-02 |
Batch fabrication process for magnetic heads Grant 4,939,837 - Krounbi July 10, 1 | 1990-07-10 |
Thin film magnetic recording disk and fabrication process Grant 4,935,278 - Krounbi , et al. June 19, 1 | 1990-06-19 |
Magnetoresistive read transducer having patterned orientation of longitudinal bias Grant 4,785,366 - Krounbi , et al. November 15, 1 | 1988-11-15 |
Magnetoresistive read transducer with insulator defined trackwidth Grant 4,782,414 - Krounbi , et al. November 1, 1 | 1988-11-01 |
Magnetoresistive read transducer Grant 4,713,708 - Krounbi , et al. December 15, 1 | 1987-12-15 |