loadpatents
Patent applications and USPTO patent grants for Kras; Stephen J..The latest application filed is for "rotary tool ejection technology".
Patent | Date |
---|---|
Rotary tool ejection technology Grant 10,272,586 - Budek , et al. | 2019-04-30 |
Rotary Tool Ejection Technology App 20180333885 - Budek; Rich Paul ;   et al. | 2018-11-22 |
Rotary tool ejection technology Grant 9,844,889 - Budek , et al. December 19, 2 | 2017-12-19 |
Food Product Mold and Method for Installing Same App 20160100622 - BUDEK; RICH PAUL ;   et al. | 2016-04-14 |
Compression Plate Ejection Technology App 20160029688 - BUDEK; RICH PAUL ;   et al. | 2016-02-04 |
Rotary Tool Ejection Technology App 20160031142 - Kras; Stephen J ;   et al. | 2016-02-04 |
Rotary Tool Ejection Technology App 20160031143 - KRAS; STEPHEN J ;   et al. | 2016-02-04 |
Metal closure and seal combination for maintaining the shape of a plastic container neck Grant 9,221,586 - Szczesniak , et al. December 29, 2 | 2015-12-29 |
Metal Closure And Seal Combination For Maintaining The Shape Of A Plastic Container Neck App 20150041474 - Szczesniak; Dennis ;   et al. | 2015-02-12 |
Metal closure and seal combination for maintaining the shape of a plastic container neck Grant 8,893,906 - Szczesniak , et al. November 25, 2 | 2014-11-25 |
Metal Closure And Seal Combination For Maintaining The Shape Of A Plastic Container Neck App 20140263155 - Szczesniak; Dennis ;   et al. | 2014-09-18 |
Closure cap with injection molded annular gasket and method of making same Grant 7,740,785 - Taber , et al. June 22, 2 | 2010-06-22 |
Closure Cap With Injection Molded Annular Gasket and Method of Making Same App 20080272514 - Taber; James ;   et al. | 2008-11-06 |
Closure cap with injection molded annular gasket and method of making same App 20050284838 - Taber, James ;   et al. | 2005-12-29 |
Composite closure with barrier end panel App 20050284837 - Taber, James ;   et al. | 2005-12-29 |
Reduced application energy closure App 20040069738 - Orth, Kevin William ;   et al. | 2004-04-15 |
Cap Grant D487,700 - Bourque , et al. March 23, 2 | 2004-03-23 |
Cap Grant D482,967 - Bourque , et al. December 2, 2 | 2003-12-02 |
Closure cap with injection molded annular gasket and method of making same App 20030098287 - Taber, James ;   et al. | 2003-05-29 |
Dairy closure Grant D460,357 - Kras , et al. July 16, 2 | 2002-07-16 |
Mold for closure cap Grant 4,610,621 - Taber , et al. September 9, 1 | 1986-09-09 |
Dispensing closure with latch mechanism Grant 4,607,768 - Taber , et al. August 26, 1 | 1986-08-26 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.