loadpatents
name:-0.0070710182189941
name:-0.013153076171875
name:-0.00052595138549805
Hensel; Robert J. Patent Filings

Hensel; Robert J.

Patent Applications and Registrations

Patent applications and USPTO patent grants for Hensel; Robert J..The latest application filed is for "dock seal system".

Company Profile
0.13.7
  • Hensel; Robert J. - Germantown WI
  • Hensel; Robert J. - Oshkosh WI
  • Hensel; Robert J. - Gaston OR
*profile and listings may contain filings by different individuals or companies with the same name. Review application materials to confirm ownership/assignment.
Patent Activity
PatentDate
Dock Seal System
App 20220127088 - Kalavathi; Sunil ;   et al.
2022-04-28
Gate Safety Barrier Assembly
App 20220074149 - Palus; Thomas ;   et al.
2022-03-10
Loading Dock Seal
App 20190177099 - Hensel; Robert J.
2019-06-13
Impactable Vehicle Restraint
App 20160369876 - MUHL; Timothy J. ;   et al.
2016-12-22
Impactable vehicle restraint
Grant 9,428,349 - Muhl , et al. August 30, 2
2016-08-30
Cyclonic air cleaner
Grant 9,206,721 - Rotter , et al. December 8, 2
2015-12-08
Impactable Vehicle Restraint
App 20150191319 - MUHL; TIMOTHY J. ;   et al.
2015-07-09
Cyclonic air cleaner
Grant 8,808,432 - Rotter , et al. August 19, 2
2014-08-19
Cyclonic Air Cleaner
App 20140053796 - Rotter; Terrence M. ;   et al.
2014-02-27
Cyclonic air cleaner housing
Grant D632,770 - Rotter , et al. February 15, 2
2011-02-15
Cyclonic Air Cleaner
App 20090308250 - Rotter; Terrence M. ;   et al.
2009-12-17
Fuel reservoir mounted to a driveshaft housing of an outboard motor
Grant 6,390,871 - Wickman , et al. May 21, 2
2002-05-21
Fluid bearing with asymmetrical groove pattern
Grant 5,427,456 - Hensel June 27, 1
1995-06-27
Metering pump controlled oil injection system for two cycle engine
Grant 4,955,943 - Hensel , et al. September 11, 1
1990-09-11
Fuel injected two cycle engine with progressive throttle linkage for improved resolution of throttle position sensor
Grant 4,864,996 - Hensel September 12, 1
1989-09-12
Vacuum bleed and flow restrictor fitting for fuel injected engines with vapor separator
Grant 4,856,483 - Beavis , et al. August 15, 1
1989-08-15
Fuel puddle bleed shut-off for fuel injected two cycle engine
Grant 4,794,889 - Hensel January 3, 1
1989-01-03
Fuel line purging device
Grant 4,732,131 - Hensel March 22, 1
1988-03-22
Closed end fuel injection system
Grant 4,699,109 - Hensel October 13, 1
1987-10-13

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed