loadpatents
Patent applications and USPTO patent grants for Heavens; Glenn G..The latest application filed is for "clipping bushing device of fastener assembly".
Patent | Date |
---|---|
Clipping bushing device of fastener assembly Grant 10,941,795 - Heavens , et al. March 9, 2 | 2021-03-09 |
Clipping Bushing Device Of Fastener Assembly App 20200018340 - Heavens; Glenn G. ;   et al. | 2020-01-16 |
Bushing Assembly App 20190154075 - Holt; Jason D. ;   et al. | 2019-05-23 |
Bushing assembly Grant 10,228,012 - Holt , et al. | 2019-03-12 |
Anchoring fastener assembly Grant 9,500,218 - Owens, II , et al. November 22, 2 | 2016-11-22 |
Fastener retainer Grant 9,303,679 - Dechant , et al. April 5, 2 | 2016-04-05 |
Anchoring Fastener Assembly App 20140271026 - Owens, II; Ronald C. ;   et al. | 2014-09-18 |
Bushing Assembly App 20140186136 - HOLT; Jason ;   et al. | 2014-07-03 |
Fastener Retainer App 20140161562 - Dechant; Daniel A. ;   et al. | 2014-06-12 |
Dual-phase spring assembly for use with fuel injector system Grant 8,714,139 - Holt , et al. May 6, 2 | 2014-05-06 |
Bushing assembly Grant 8,454,290 - Schaser , et al. June 4, 2 | 2013-06-04 |
Bushing Assembly App 20110311333 - Schaser; Robert R. ;   et al. | 2011-12-22 |
Dual-phase Spring Assembly For Use With Fuel Injector System App 20110247591 - Holt; Jason D. ;   et al. | 2011-10-13 |
Work piece isolating assembly Grant 7,682,117 - Holt , et al. March 23, 2 | 2010-03-23 |
Bushing Assembly App 20100021263 - Holt; Jason ;   et al. | 2010-01-28 |
Fastening Device And Method Of Fabricating The Same App 20080226419 - HOLT; JASON ;   et al. | 2008-09-18 |
Crack test for stamped flange Grant 7,412,760 - Heavens , et al. August 19, 2 | 2008-08-19 |
Work Piece Isolating Assembly App 20080075403 - Holt; Jason ;   et al. | 2008-03-27 |
Drain Valve App 20080000724 - Stlaske; William G. ;   et al. | 2008-01-03 |
Crack tester for flared ends Grant 7,305,862 - Heavens , et al. December 11, 2 | 2007-12-11 |
Measurement device and process Grant 7,251,901 - Heavens August 7, 2 | 2007-08-07 |
Measurement device and process App 20070062056 - Heavens; Glenn G. | 2007-03-22 |
Cracked barrel detection system App 20070062236 - Heavens; Glenn G. | 2007-03-22 |
Crack test for stamped flange App 20070062298 - Heavens; Glenn G. ;   et al. | 2007-03-22 |
Crack tester for flared ends App 20070062235 - Heavens; Glenn G. ;   et al. | 2007-03-22 |
Captive fastener Grant 6,769,851 - Agha , et al. August 3, 2 | 2004-08-03 |
Fastener assembly device Grant 6,634,841 - Heavens , et al. October 21, 2 | 2003-10-21 |
Captive fastener retention member App 20030108402 - Agha, Henna ;   et al. | 2003-06-12 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.