loadpatents
Patent applications and USPTO patent grants for Danielson; Reid C..The latest application filed is for "integrated lead flexure with embedded traces".
Patent | Date |
---|---|
Method of manufacturing for a disk drive head suspension for a fold over limiter Grant 8,881,374 - Bjorstrom , et al. November 11, 2 | 2014-11-11 |
Continuous stainless steel ground plane flexure for a disk drive head suspension Grant 8,416,532 - Miller , et al. April 9, 2 | 2013-04-09 |
Integrated lead flexure with embedded traces Grant 7,835,112 - Danielson , et al. November 16, 2 | 2010-11-16 |
Shielded copper-dielectric flexure for disk drive head suspensions Grant 7,697,237 - Danielson April 13, 2 | 2010-04-13 |
Slidably engaging snap-on arm mounts for disk drive head suspensions Grant 7,466,518 - Bjorstrom , et al. December 16, 2 | 2008-12-16 |
Head suspension with etched rail load beam Grant 7,430,096 - Bjorstrom , et al. September 30, 2 | 2008-09-30 |
Integrated Lead Flexure With Embedded Traces App 20080192384 - Danielson; Reid C. ;   et al. | 2008-08-14 |
Method For Forming An Electrical Interconnect To A Spring Layer In An Integrated Lead Suspension App 20080088975 - Bennin; Jeffry S. ;   et al. | 2008-04-17 |
Low stiffness gimbal for disk drive head suspensions Grant 7,068,471 - Bjorstrom , et al. June 27, 2 | 2006-06-27 |
Disk drive head suspension with spring rails for base plate microactuation Grant 7,016,159 - Bjorstrom , et al. March 21, 2 | 2006-03-21 |
Coined ground features for integrated lead suspensions App 20050195528 - Bennin, Jeffry S. ;   et al. | 2005-09-08 |
Low stiffness gimbal for disk drive head suspensions Grant 6,788,498 - Bjorstrom , et al. September 7, 2 | 2004-09-07 |
Head suspension with integral shock limiter App 20040130825 - Danielson, Reid C. ;   et al. | 2004-07-08 |
Head suspension with rail and stiffener combination Grant 6,741,424 - Danielson , et al. May 25, 2 | 2004-05-25 |
Head suspension with integral shock limiter Grant 6,667,856 - Danielson , et al. December 23, 2 | 2003-12-23 |
Head suspension with integral shock limiter method App 20030058579 - Danielson, Reid C. ;   et al. | 2003-03-27 |
Head suspension with integral shock limiter App 20030058580 - Danielson, Reid C. ;   et al. | 2003-03-27 |
Head suspension having a modified dimple design Grant 6,078,470 - Danielson , et al. June 20, 2 | 2000-06-20 |
In-stack adjustable magnetic head suspension Grant 5,995,335 - Jurgenson , et al. November 30, 1 | 1999-11-30 |
Method of making a load beam with inward stiffening channel Grant 5,943,774 - Danielson , et al. August 31, 1 | 1999-08-31 |
Three piece suspension Grant 5,793,569 - Christianson , et al. August 11, 1 | 1998-08-11 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.