loadpatents
Patent applications and USPTO patent grants for Colloud; Alain.The latest application filed is for "bottle, method of making the same and use of fdca and diol monomers in such bottle".
Patent | Date |
---|---|
Bottle for water dispensers Grant D898,575 - Tanchette , et al. October 13, 2 | 2020-10-13 |
Bottle, Method Of Making The Same And Use Of Fdca And Diol Monomers In Such Bottle App 20190299515 - Bouffand; Marie-Bernard ;   et al. | 2019-10-03 |
Bottle Grant D813,046 - Llewellyn , et al. March 20, 2 | 2018-03-20 |
Self collapsible blow moulded plastic thin-walled containers and a dispensing method using same Grant 9,828,166 - Bouffand , et al. November 28, 2 | 2017-11-28 |
Packaging Set Including At Least Two Bottles Nesting At Least One Article Different From The Bottles App 20170001779 - DUARTE DA CAL; Germano ;   et al. | 2017-01-05 |
Bottle, Method Of Making The Same And Use Of Fdca And Diol Monomers In Such Bottle App 20160009015 - BOUFFAND; Marie-Bernard ;   et al. | 2016-01-14 |
Self Collapsable Blow Moulded Plastic Thin-walled Containers, Their Manufacturing Process And Their Applications In Water Dispensing Units App 20150321826 - Bouffand; Marie-Bernard ;   et al. | 2015-11-12 |
Bottle Grant D710,707 - Colloud August 12, 2 | 2014-08-12 |
Process For Injection Molding Of Thin-walled Preform App 20140199520 - Bertheol; Gilles ;   et al. | 2014-07-17 |
Bottle Grant D705,660 - Colloud May 27, 2 | 2014-05-27 |
Process for injection molding of thin-walled preform Grant 8,691,140 - Bertheol , et al. April 8, 2 | 2014-04-08 |
Plastic bottle with a champagne base and production method thereof Grant 8,485,375 - Colloud July 16, 2 | 2013-07-16 |
Bottle Grant D668,157 - Colloud October 2, 2 | 2012-10-02 |
Blow Molding Device App 20120094043 - Bertheol; Gilles ;   et al. | 2012-04-19 |
Injection blow molding device for the manufacture of a thin-walled part Grant 8,100,687 - Bertheol , et al. January 24, 2 | 2012-01-24 |
Plastic bottle with a gripping portion Grant 8,091,720 - Colloud January 10, 2 | 2012-01-10 |
Plastic Bottle With A Gripping Portion App 20100230378 - Colloud; Alain | 2010-09-16 |
Plastic Bottle With A Champagne Base And Production Method Thereof App 20100032404 - Colloud; Alain | 2010-02-11 |
Injection Blow Molding Device for the Manufacture of a Thin-Walled Part and Process App 20090220809 - Bertheol; Gilles ;   et al. | 2009-09-03 |
Bottle made of plastic material having a gripping portion App 20070257003 - Colloud; Alain | 2007-11-08 |
Bottle Grant D517,918 - Colloud , et al. March 28, 2 | 2006-03-28 |
Bottle Grant D414,112 - Waggaman , et al. September 21, 1 | 1999-09-21 |
Bottle Grant D409,493 - Waggaman , et al. May 11, 1 | 1999-05-11 |
Molded plastics bottle and a mold for making it Grant 5,713,480 - Petre , et al. February 3, 1 | 1998-02-03 |
Strain gauge weighing device Grant 5,076,376 - Bizet , et al. December 31, 1 | 1991-12-31 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.