loadpatents
Patent applications and USPTO patent grants for Chapman; Timothy W..The latest application filed is for "inflatable bolster".
Patent | Date |
---|---|
Inflatable bolster Grant 8,827,307 - Roychoudhury , et al. September 9, 2 | 2014-09-09 |
Inflatable Bolster App 20120080871 - Roychoudhury; Raj S. ;   et al. | 2012-04-05 |
Running board for vehicle Grant 8,016,309 - Flajnik , et al. September 13, 2 | 2011-09-13 |
Bolster deployment pattern Grant 7,992,895 - Roychoudhury , et al. August 9, 2 | 2011-08-09 |
Structural knee bolster Grant 7,481,457 - Best , et al. January 27, 2 | 2009-01-27 |
Structural knee bolster Grant 7,393,013 - Best , et al. July 1, 2 | 2008-07-01 |
Structural Knee Bolster App 20080150268 - Best; Michael James ;   et al. | 2008-06-26 |
Tailgate clip Grant D567,722 - Chapman , et al. April 29, 2 | 2008-04-29 |
Method for molding running board with step plate Grant 7,332,120 - Chapman , et al. February 19, 2 | 2008-02-19 |
Running board for vehicle App 20070296175 - Flajnik; David ;   et al. | 2007-12-27 |
Bolster Deployment Pattern App 20070108747 - Roychoudhury; Raj S. ;   et al. | 2007-05-17 |
Integrated air induction system Grant 7,150,260 - Arevalo , et al. December 19, 2 | 2006-12-19 |
Running board Grant 7,083,179 - Chapman , et al. August 1, 2 | 2006-08-01 |
Running board bracket Grant D521,439 - Chapman , et al. May 23, 2 | 2006-05-23 |
Method for machining a stainless steel exhaust manifold for a multi-cylinder combustion engine App 20060085982 - Sturtevant; Jeffrey L. ;   et al. | 2006-04-27 |
Method for machining a stainless steel exhaust manifold for a multi-cylinder combustion engine Grant 6,993,839 - Sturtevant , et al. February 7, 2 | 2006-02-07 |
Integrated air induction system App 20050224036 - Arevalo, Hever ;   et al. | 2005-10-13 |
Method for molding running board with step plate App 20050067741 - Chapman, Timothy W. ;   et al. | 2005-03-31 |
Structural knee bolster App 20050052010 - Best, Michael James ;   et al. | 2005-03-10 |
Running board App 20040173987 - Chapman, Timothy W. ;   et al. | 2004-09-09 |
Method for machining a stainless steel exhaust manifold for a multi-cylinder combustion engine App 20040006871 - Sturtevant, Jeffrey L. ;   et al. | 2004-01-15 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.