loadpatents
Patent applications and USPTO patent grants for Brink; Damon Douglas.The latest application filed is for "method of fabricating a base plate for piezo actuation".
Patent | Date |
---|---|
Method of fabricating a base plate for piezo actuation Grant 10,367,135 - Dexter , et al. July 30, 2 | 2019-07-30 |
Nesting disk separator plates for use in hard disk drives Grant 10,262,689 - How , et al. | 2019-04-16 |
Method Of Fabricating A Base Plate For Piezo Actuation App 20160248000 - DEXTER; DAVID DJANGO ;   et al. | 2016-08-25 |
Method to fabricate a base plate for piezo actuation Grant 9,361,917 - Dexter , et al. June 7, 2 | 2016-06-07 |
Disk Separator Plates And Method Of Making Disk Separator Plates For Hard Disk Drives App 20160140996 - How; Leong Weng ;   et al. | 2016-05-19 |
Disk separator plates and method of making disk separator plates for hard disk drives Grant 9,283,608 - How , et al. March 15, 2 | 2016-03-15 |
Disk Separator Plates And Method Of Making Disk Separator Plates For Hard Disk Drives App 20140335371 - How; Leong Weng ;   et al. | 2014-11-13 |
Tolerance Ring With Edge Bump Difference App 20140193190 - Schmidt; Ryan John ;   et al. | 2014-07-10 |
Tolerance ring with edge bump difference Grant 8,385,024 - Schmidt , et al. February 26, 2 | 2013-02-26 |
Method to fabricate a base plate for piezo actuation App 20130019724 - Dexter; David Django ;   et al. | 2013-01-24 |
Pivot attach method for disk drive actuator using taper lock shims Grant 8,284,523 - Schmidt , et al. October 9, 2 | 2012-10-09 |
Pivot Attach Method for Disk Drive Actuator Using Taper Lock Shims App 20120206836 - Schmidt; Ryan John ;   et al. | 2012-08-16 |
Method To Fabricate A Needle Having A Tapered Portion Between A Distal Tip And A Longitudinal Channel App 20120116322 - Brink; Damon Douglas ;   et al. | 2012-05-10 |
Tolerance Ring With Edge Bump Difference App 20120087044 - Schmidt; Ryan John ;   et al. | 2012-04-12 |
Medicine vaporizer with crimped conductive pins Grant 7,840,122 - Hanrahan , et al. November 23, 2 | 2010-11-23 |
Snap ring with recessed interior contour Grant 7,507,063 - Dexter , et al. March 24, 2 | 2009-03-24 |
Remelted Magnetic head support structure in a disk drive Grant 7,450,344 - Brink , et al. November 11, 2 | 2008-11-11 |
Tolerance ring with debris-reducing profile App 20050225903 - Sprankle, Matthew S. ;   et al. | 2005-10-13 |
Snap ring with recessed interior contour App 20050214101 - Dexter, David Django ;   et al. | 2005-09-29 |
Snap ring with debris-reducing cross-sectional profile App 20050213256 - Dexter, David Django ;   et al. | 2005-09-29 |
Remelted magnetic head support structure in a disk drive App 20050099731 - Brink, Damon Douglas ;   et al. | 2005-05-12 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.