Addy; Roger A.

Patent Applications and Registrations

Patent applications and USPTO patent grants for Addy; Roger A..The latest application filed is for "single piece hub with integral upper and lower female cones and method for making the same".

Company Profile

0.11.5

Addy; Roger A. - Gilroy CA

*profile and listings may contain filings by different individuals or companies with the same name. Review application materials to confirm ownership/assignment.

Patent Activity

Patent	Date
Single piece hub with integral upper and lower female cones Grant RE42,854 - Kennedy , et al. October 18, 2	2011-10-18
Method of forming a hub for use in a disk drive motor Grant 7,823,290 - Kennedy , et al. November 2, 2	2010-11-02
System and method for ballizing and measuring a workpiece bore hole Grant 7,788,961 - Dvoskin , et al. September 7, 2	2010-09-07
Electrode for electrochemical machining Grant 7,625,468 - Parkhomovsky , et al. December 1, 2	2009-12-01
System and method for ballizing and measuring a workpiece bore hole Grant 7,568,370 - Dvoskin , et al. August 4, 2	2009-08-04
Single Piece Hub With Integral Upper And Lower Female Cones And Method For Making The Same App 20080229582 - Kennedy; Michael D. ; et al.	2008-09-25
Single piece hub with integral upper and lower female cones Grant 7,390,125 - Kennedy , et al. June 24, 2	2008-06-24
Electrode for electrochemical machining App 20070215458 - Parkhomovsky; Alexander ; et al.	2007-09-20
Single piece hub with integral upper and lower female cones and method for making the same App 20050226543 - Kennedy, Michael D. ; et al.	2005-10-13
Single piece hub with integral upper and lower female cones and method for making the same App 20040156570 - Kennedy, Michael D. ; et al.	2004-08-12
Single piece hub with integral upper and lower female cones and method for making the same Grant 6,755,570 - Kennedy , et al. June 29, 2	2004-06-29
Electrode design for electrochemical machining of grooves Grant 6,638,414 - MacLeod , et al. October 28, 2	2003-10-28
Electrode design for electrochemical machining of grooves App 20010050235 - MacLeod, Donald J. ; et al.	2001-12-13
Crowned conical bearing Grant 6,280,088 - Leuthold , et al. August 28, 2	2001-08-28
Electrode design for electrochemical machining of grooves Grant 6,267,869 - MacLeod , et al. July 31, 2	2001-07-31
Crowned conical bearing Grant 6,019,516 - Leuthold , et al. February 1, 2	2000-02-01

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.