Mark For: NITCO BRAUNCO™ trademark registration is intended to cover the categories of air suspension valves for controlling suspension height for vehicles; Automobile engines; Axle bearings for land vehicles; Clips adapted for fastening automobile parts to automobile bodies; Crankcases for components for motor cars, other than for engines; Gearboxes; Gears for vehicles; Light trucks; Lorries; Lorries for mines; Motors and engines for land vehicles; Petrol tank caps for motor cars; Pickup trucks; Plastic parts for vehicles, namely, automotive exterior and interior plastic extruded decorative and protective trim; Rearview mirrors; Steering and suspension systems and parts for steering and suspension systems for vehicles, namely, upper ball joints, lower ball joints, ball joints with control arms, bushing kits, inner tie rod ends, outer tie rod ends, sleeves, idler arms, center links, stabilizer kits, inner sockets and pitman arms; Structural repair parts for trucks, trailers, and other motor vehicles; Tractors for agricultural purposes; Trailers; Trucks.
Status
2024-07-13 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
Wei Wang 41 Madison Avenue, suite 2528 New York, NY 10010 United States
Good, Services, and Codes
International Codes:
12
U.S. Codes:
019,021,023,031,035,044
Type Code
Type
GS0121
Air suspension valves for controlling suspension height for vehicles; Automobile engines; Axle bearings for land vehicles; Clips adapted for fastening automobile parts to automobile bodies; Crankcases for components for motor cars, other than for engines; Gearboxes; Gears for vehicles; Light trucks; Lorries; Lorries for mines; Motors and engines for land vehicles; Petrol tank caps for motor cars; Pickup trucks; Plastic parts for vehicles, namely, automotive exterior and interior plastic extruded decorative and protective trim; Rearview mirrors; Steering and suspension systems and parts for steering and suspension systems for vehicles, namely, upper ball joints, lower ball joints, ball joints with control arms, bushing kits, inner tie rod ends, outer tie rod ends, sleeves, idler arms, center links, stabilizer kits, inner sockets and pitman arms; Structural repair parts for trucks, trailers, and other motor vehicles; Tractors for agricultural purposes; Trailers; Trucks
Trademark Filing History
Description
Date
Proceeding Number
NEW APPLICATION ENTERED
2024-07-10
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.