Application

PTO- 1478

Approved for use through 10/31/2024. OMB 0651-0009

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

---

PTO- 1478

Approved for use through 10/31/2024. OMB 0651-0009

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

Trademark/Service Mark Application, Principal Register

Serial Number: 98605912

Filing Date: 06/18/2024

To the Commissioner for Trademarks:

MARK: RADIAMATIC (Standard Characters, see mark)
The literal element of the mark consists of RADIAMATIC. The mark consists of standard characters, without claim to any particular font style, size, or color.
The applicant, Carl Freudenberg KG, a kommanditgesellschaft (kg) legally organized under the laws of Germany, having an address of
      Hoehnerweg 2-4
      Weinheim 69469
      Germany
      XXXX

requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C. Section 1051 et seq.), as amended, for the following:

International Class 007:  Machines for processing metal, wood and plastic, machines for the chemical industry, agriculture, mining and the beverages industry, textile machines, construction machines, packaging machines and machine tools; Motors and engines (except for land vehicles); Machine coupling and transmission components (except for land vehicles); Agricultural implements, other than hand-operated; Hydraulic accumulators for storing and providing pressure; Hydraulic accumulators, in particular diaphragm accumulators, piston accumulators, accumulators for axle suspension, wheel suspension and/or cab suspension; Belts for machines; Rollers for printing machines; pump and valve diaphragms; Anti-friction bearing for machines; Ball bearings, roller bearings and plain bearings as machine parts; Self-lubricating bearings; Bearings for transmission shafts; Journal boxes; Gaskets being parts of machines or engines; Mechanical seals being parts of machines or engines, in particular being crankshaft seals; Mechanical seals being transmission seals, turbocharger seals or for sealing electric motors; Mechanical seals for hydrodynamic or pneumatic applications being parts of machines, engines or gearboxes; Rotary shaft seals being parts of machines or engines; Rod wipers and piston guide rings used in hydraulic and pneumatic cylinders; Guide and oil-removing elements for hydraulic and pneumocylinders; Intake manifolds for land, air and sea vehicles; Parts for motors and engines of air and water vehicles, namely shaft couplings, Transmission shafts, Journals; Piston rings, guide rings, valves and parts therefor, bearings and guides, shaped parts and moulded parts for mechanical and apparatus engineering, in particular of plastic or predominantly of plastic, in particular of fluorocarbon resin or elastomers; Machine belts; Bellows; Blow guns, In particular folding bellows of rubber, folding bellows of TPE; Elastic bearings for machines or engines as noise and vibration absorption parts; Pneumatic springs and spring legs with bellows of elastomeric material for supporting vibrating vehicle and machine parts; Elastic springs for damping noise, vibration and shock insulation as parts of machines; Multilayer springs for damping noise, vibration and shock insulation as parts of machines; Parts of motors for damping and vibroinsulation; Gas-distributing and valve-actuating machinery; Parts for motors and engines of land vehicles, namely bearing pins; Finished products of vulcanised perfluoroelastomers in the form of membranes for use in hydraulics, pneumatics and mechanical engineering; seals, being parts of machines, of the following materials: Metals, Plastic and/or ceramic
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

Priority based on foreign filing: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services and asserts a claim of priority based on European Union Trademark - EUTM application number 018966389, filed 12/20/2023.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.


International Class 017:  Rubber, gutta-percha, gum, asbestos, mica; Plastics in extruded form for use in manufacture; Packing, stopping and insulating materials; Sealing and packing cord, Packing and stopping materials, Seals for sensors; Gasket support rings; Artificial resins, in particular fluorocarbon resins or elastomers, being semi-finished products in the form of plates, tubes, rods, blocks, flexible pipes, not of metal, fittings, expansion joints, films for sealing purposes, filling material for reaction columns, balls, filter material in the form of fibres or porous plates; Guide tubes, insulating tubes and insulating parts for electrical purposes, having springs with corrosion-resistant coatings for sealing purposes, in particular for mechanical seals, corrugated tubes for vacuum operation and being spring washers; All of the aforesaid goods being made of or predominantly of plastic, in particular of fluorocarbon resin or elastomers; Shaft seals of polytetrafluoroethylene, gum or highly elastic and thermoplastic plastics, including combined with metal or other plastics, in particular lip seals for moveable parts of machines; radial shaft seals, Shaft sealing rings, Cassette seals; Combination seals; Rotary seals; Packings for static seals; Valve stem seals; Hydraulic brake seals; O-ring seals; Support seals; Composite seals; fibrous gaskets; Butterfly valve seals; Sealing plugs being metal-elastomer composite parts (predominantly of elastomers); Seals for shock-absorbers and gas springs; Valve spindle seals; Seals for hydraulic braking systems; Seals for hydraulic and pneumocylinders; Water-tight rings; O-rings; Flat seals; Profile seals; Axle seals; Sealing plates; Insulating foils; Sealing frames; Hydraulic and pneumatic seals, in particular rod seals; Piston seals; Rod wiper seals; Buffer seals; Wiper rings and guide rings for sealing against oil, grease or air in hydraulic and pneumatic cylinders; Plastics in extruded form for use in manufacture, being elastic rubber-like plastics, in particular including combined with metals and other plastics, in particular moulded parts, including boards, sheets and flaps, profiles, discs and washers; Screw seal rings, in particular USIT rings; Plug-in pieces; Rotary pressure seals; Diaphragms, in particular accumulator and separator diaphragms, pump diaphragms, regulating and switching diaphragms; Partitions, being diaphragms, in particular being diaphragms of elastomers; Moulded parts of polytetrafluoroethylene; Solid silicone parts, in particular jet formers for showers, seals, diaphragms, housing parts, injection-moulded parts; Moulded parts for machine elements made of liquid silicon; Liquid silicone seals; Plastics in the form of sheets, blocks, spheres, rods and tubes; Moulded parts of PTFE; Grooved rings, in particular including grooved rings of PTFE; Static and dynamic seals; Static cylinder cover seals; V-packings as multiple lip (chevron) packing seals designed to seal static reciprocating and centrifugal applications, where the male and female adapters are used to complete a set of vees; Stuffing box packings (seals); Micro-parts of plastic or elastomeric material (semi-finished products); Non-metal seals, namely, oil seals, fluid seals, insulating seals, reinforced seals, elastomeric seals, seals for pistons and rods, namely, cups, rings, packings and gaskets, all the foregoing for sealing oil, grease or air in hydraulic and pneumatic applications; Rubberised chain wheels; Packaging materials for moulded seals for sealing and insulation purposes; Plates of graphite-based materials for use as sealing rings, packing seals and heat insulation; Slide ring packings, mechanical seals and Gasket support rings; Glide ring packings, seals, and sealing support rings for sealing oil, grease or air in hydraulic and pneumatic applications; Guide elements for hydraulic and pneumatic applications, in particular guide rings and bearing rings for protecting cylinder rods and pistons; Damping elements, in particular for pneumatic applications; Sound insulating multilayered sheets and formed parts of foam and/or plastics for vehicle cabins, for the building industry and for industrial machines; Perfluoroelastomers being films, plates and rods (semi-finished products); Moulded semi-finished parts and finished products of vulcanised perfluoroelastomers, in particular in the form of seals and o-rings, for use in hydraulics, pneumatics and mechanical engineering; Packing and stopping material
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

Priority based on foreign filing: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services and asserts a claim of priority based on European Union Trademark - EUTM application number 018966389, filed 12/20/2023.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.




The owner's/holder's proposed attorney information: Jessica S. Sachs. Other appointed attorneys are Any and all attorneys associated with Harness, Dickey & Pierce, P.L.C.. Jessica S. Sachs of Harness, Dickey & Pierce, P.L.C., is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at
      Suite 200
      5445 Corporate Drive
      Troy, Michigan 48098
      United States
      248-641-1600(phone)
      248-641-0270(fax)
      troymailroom@harnessip.com
The docket/reference number is 8470TF200324.
Jessica S. Sachs submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.

The applicant's current Correspondence Information:

Jessica S. Sachs

PRIMARY EMAIL FOR CORRESPONDENCE: troymailroom@harnessip.com        SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): jsachs@harnessip.com; hrowe@harnessip.com Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed, and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).

A fee payment in the amount of $700 has been submitted with the application, representing payment for 2 class(es).

Declaration

	Basis: If the applicant is filing the application based on use in commerce under 15 U.S.C. § 1051(a): The signatory believes that the applicant is the owner of the trademark/service mark sought to be registered; The mark is in use in commerce and was in use in commerce as of the filing date of the application on or in connection with the goods/services in the application; The specimen(s) shows the mark as used on or in connection with the goods/services in the application and was used on or in connection with the goods/services in the application as of the application filing date; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate. And/Or If the applicant is filing the application based on an intent to use the mark in commerce under 15 U.S.C. § 1051(b), § 1126(d), and/or § 1126(e): The signatory believes that the applicant is entitled to use the mark in commerce; The applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate.
	To the best of the signatory's knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive.
	To the best of the signatory's knowledge, information, and belief, formed after an inquiry reasonable under the circumstances, the allegations and other factual contentions made above have evidentiary support.
	The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.

Declaration Signature

Signature: /jss/   Date: 06/18/2024
Signatory's Name: Jessica S. Sachs
Signatory's Position: Attorney for Applicant; An Attorney at Harness, Dickey & Pierce, P.L.C. having actual or implied, written or oral, power of attorney from Applicant
Signatory's Phone Number: 248-641-1292
Signature method: Sent to third party for signature
Payment Sale Number: 98605912
Payment Accounting Date: 06/18/2024

Serial Number: 98605912
Internet Transmission Date: Tue Jun 18 08:04:44 ET 2024
TEAS Stamp: USPTO/BAS-XX.XXX.XX.XXX-2024061808044503
3024-98605912-870d4d8f0501af96926c755e58
992bec87b18ed0f9cc4ca19fc97665eca186dd4-
DA-04447220-20240618075357268001