The mark consists of the configuration of a housing for a supply of flexible cutting line and having a cylindrically shaped center wall, a top cover with a depending rim having a diameter greater than the diameter of the cylindrically shaped center wall, and an upwardly projecting rim extending around the bottom of the cylindrically shaped center wall.
Mark For: This trademark registration is intended to cover the category of power-operated trimmer heads.
Status
2023-07-20 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
John S. Mortimer
Attorney Docket Number
00601T00060
Timeline
2013-02-25
Date of First Use
2013-02-25
Date of Use In Commerce
2023-07-17
Application Filed
2023-07-20
Location: NEW APPLICATION PROCESSING
2023-07-20
Status: Live/Pending
2023-07-20
Status: New application awaiting assignment to an examining attorney. See current trademark processing wait times for more information.
Air pumps, motorized; Compactors, industrial and commercial; Door closers; Fulcrums; Pumps, air (motorized); Robots, industrial; Trash compactors, industrial
261902
Cylinders (geometric)
Attorney of Record
JOHN S. MORTIMER WOOD, PHILLIPS, KATZ, CLARK & MORTIMER 500 W. MADISON STREET SUITE 1130 CHICAGO, IL 60661-2562
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,024,031,034,035
Type Code
Type
DM0000
The mark consists of the configuration of a housing for a supply of flexible cutting line and having a cylindrically shaped center wall, a top cover with a depending rim having a diameter greater than the diameter of the cylindrically shaped center wall, and an upwardly projecting rim extending around the bottom of the cylindrically shaped center wall.
Trademark Filing History
Description
Date
Proceeding Number
NEW APPLICATION ENTERED
2023-07-20
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.