The mark consists of a three-dimensional configuration for a wheel rim design. The wheel rim design has five single-prong spokes, with each spoke radiating from a center of the wheel rim to its outer rim, which tapers at each end of the spokes on the outer edge of the rim. Each spoke has a concave curvature, with such concave curvature being inward toward the center of the wheel rim. Along the side of each spoke is a continuous indented lining starting on one end of a spoke at the outer rim edge and continuing around such spoke and to side the next spoke, and ending at the outer rim edge. Behind the spokes is a plurality of decorative rivets located around an inner circumference portion of the wheel rim. Located between each spoke along the outer circumference of the wheel rim are a raised edges therebetween. Dotted lines indicate elements not claimed as features of the mark. The shading in the drawing is to further illustrate curvature of the wheel rim design and is for illustrative purposes only.
Mark For: This trademark registration is intended to cover the categories of rims for vehicle wheels; Vehicle wheel rims.
Status
2022-06-25 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
NICHOLAS D. MYERS THE MYERS LAW GROUP 4695 MACARTHUR COURT, SUITE 200 NEWPORT BEACH, CA 92660
Good, Services, and Codes
International Codes:
12
U.S. Codes:
019,021,023,031,035,044
Type Code
Type
DM0000
The mark consists of a three-dimensional configuration for a wheel rim design. The wheel rim design has five single-prong spokes, with each spoke radiating from a center of the wheel rim to its outer rim, which tapers at each end of the spokes on the outer edge of the rim. Each spoke has a concave curvature, with such concave curvature being inward toward the center of the wheel rim. Along the side of each spoke is a continuous indented lining starting on one end of a spoke at the outer rim edge and continuing around such spoke and to side the next spoke, and ending at the outer rim edge. Behind the spokes is a plurality of decorative rivets located around an inner circumference portion of the wheel rim. Located between each spoke along the outer circumference of the wheel rim are a raised edges therebetween. Dotted lines indicate elements not claimed as features of the mark. The shading in the drawing is to further illustrate curvature of the wheel rim design and is for illustrative purposes only.
Trademark Filing History
Description
Date
Proceeding Number
NEW APPLICATION ENTERED IN TRAM
2022-06-25
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
BSI Wheels, Inc.
Drawing
| 