Mark For: CREALITY3D™ trademark registration is intended to cover the categories of semi-worked ABS (acrylonitrile butadiene styrene) filaments for use in 3D printing; Semi-worked ABS filaments for use in 3D printing; Semi-worked PLA (polylactic acid) filaments for use in 3D printing; Semi-worked PLA filaments for use in 3D printing; Semi-worked rubber; Semi-worked synthetic plastic and synthetic resins as semi-finished products in form of pellets, rods, foils, foams, fibers, films and sheets; Semi-worked thermoplastic filaments used for 3D printing. [all]
Status
2022-06-03 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
050:
Merchandise Not Otherwise Classified
Primary International Class
017 - Primary Class
(Rubber goods) Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Xinshuo Wang
Timeline
2022-05-08
Date of First Use
2022-05-08
Date of Use In Commerce
2022-05-30
Application Filed
2022-06-02
Location: NEW APPLICATION PROCESSING
2022-06-02
Status: Live/Pending
2022-06-02
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
XINSHUO WANG NEW UNION LAW, APC 2570 N. 1ST ST., STE 200 SAN JOSE, CA 95131
Good, Services, and Codes
IC 017. US 001 005 012 013 035 050. G & S: Semi-worked ABS (acrylonitrile butadiene styrene) filaments for use in 3D printing; Semi-worked ABS filaments for use in 3D printing; Semi-worked PLA (polylactic acid) filaments for use in 3D printing; Semi-worked PLA filaments for use in 3D printing; Semi-worked rubber; Semi-worked synthetic plastic and synthetic resins as semi-finished products in form of pellets, rods, foils, foams, fibers, films and sheets; Semi-worked thermoplastic filaments used for 3D printing. FIRST USE: 20220508. FIRST USE IN COMMERCE: 20220508
International Codes:
17
U.S. Codes:
001,005,012,013,035,050
Type Code
Type
GS0171
Semi-worked ABS (acrylonitrile butadiene styrene) filaments for use in 3D printing; Semi-worked ABS filaments for use in 3D printing; Semi-worked PLA (polylactic acid) filaments for use in 3D printing; Semi-worked PLA filaments for use in 3D printing; Semi-worked rubber; Semi-worked synthetic plastic and synthetic resins as semi-finished products in form of pellets, rods, foils, foams, fibers, films and sheets; Semi-worked thermoplastic filaments used for 3D printing
Trademark Filing History
Description
Date
Proceeding Number
NEW APPLICATION ENTERED IN TRAM
2022-06-02
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Aibosen R&D (Shenzhen) Co., Ltd.
Drawing
| 