Trademark/Service Mark Application, Principal Register
PTO- 1478
Approved for use through 10/31/2024. OMB 0651-0009
U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number
Trademark/Service Mark Application, Principal Register
The mark consists of standard characters, without claim to any particular font style, size, or color.
REGISTER
Principal
APPLICANT INFORMATION
*OWNER OF MARK
UES (Int'l) Pty Ltd
*MAILING ADDRESS
10 Birmingham Street
*CITY
Alexandria, NSW
*COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
Australia
*ZIP/POSTAL CODE
(Required for U.S. and certain international addresses)
2015
*EMAIL ADDRESS
XXXX
LEGAL ENTITY INFORMATION
TYPE
proprietary limited company (p/l or pty. ltd.)
STATE/COUNTRY/REGION/JURISDICTION/U.S. TERRITORY WHERE LEGALLY ORGANIZED
Australia
GOODS AND/OR SERVICES AND BASIS INFORMATION
INTERNATIONAL CLASS
006
*IDENTIFICATION
Metal tanks for storing water for household and industrial purposes; Metal fasteners namely spring bolts, latches, clips, pins, over-center
fasteners, slide fasteners lashing rings, metal fasteners for windows and doors, metal clevis fasteners, metal fasteners for door retainers; Locks of metal, other than electric, for doors, windows,
containers and bins, metal spring locks, slam locks, metal locking mechanisms, vector locks, whale tail locks; Metal handles for doors, windows, furniture, cabinets and containers; Metal hinges for
doors, windows, furniture, cabinets and containers; metal spring hinges; metal floor hinges; rear door hinges for vehicles; Metal tool boxes; Metal cables, metal ties, metal clamps, metal rings for
cargo restraint during transportation; Metal catch plates, door retainers, drawer slides and corner castings; Metal wheel chocks; Metal tailgate pivots, latches, fasteners, metal hinges for
tailboards
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
012
*IDENTIFICATION
Vehicle parts namely mirrors, mirror arms, vents and louvres
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
017
*IDENTIFICATION
Buffer rubber being impact rubber for bollards, bumpers, packing and padding; Insertion rubber for sealing, mud flaps and rubber sheeting;
Insulation for vehicles; Wheel chocks of rubber or plastic; Extruded rubber for vehicles; Pinchweld rubber; Rubber protector for vehicle wheel arch
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
020
*IDENTIFICATION
Fasteners of plastic for windows and doors; Non-metal locks for windows and doors; Non-metal handles for doors, windows, furniture, cabinets
and containers; Non-metal hinges for doors, windows, furniture, cabinets and containers; non- metal spring hinges; non-metal floor hinges; Non-metal tool boxes; Non-metal catch plates, door
retainers, drawer slides and corner castings
FILING BASIS
SECTION 1(b)
ATTORNEY INFORMATION
NAME
Michael A. Bondi
ATTORNEY DOCKET NUMBER
55741.095001
ATTORNEY BAR MEMBERSHIP NUMBER
XXX
YEAR OF ADMISSION
XXXX
U.S. STATE/ COMMONWEALTH/ TERRITORY
XX
FIRM NAME
Moss & Barnett
STREET
150 South Fifth Street, Suite 1200
CITY
Minneapolis
STATE
Minnesota
COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
ZIP/POSTAL CODE
55402
PHONE
612-877-5307
FAX
612-877-5072
EMAIL ADDRESS
ipmab@lawmoss.com
OTHER APPOINTED ATTORNEY
Michael Bondi, Glen Schumann, Garrett Weber
CORRESPONDENCE INFORMATION
NAME
Michael A. Bondi
PRIMARY EMAIL ADDRESS FOR CORRESPONDENCE
ipmab@lawmoss.com
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES)
NOT PROVIDED
FEE INFORMATION
APPLICATION FILING OPTION
TEAS Standard
NUMBER OF CLASSES
4
APPLICATION FOR REGISTRATION PER CLASS
350
*TOTAL FEES DUE
1400
*TOTAL FEES PAID
1400
SIGNATURE INFORMATION
SIGNATURE
/Michael A. Bondi/
SIGNATORY'S NAME
Michael A. Bondi
SIGNATORY'S POSITION
Attorney of record, Minnesota bar member
SIGNATORY'S PHONE NUMBER
612-877-5307
DATE SIGNED
05/03/2022
SIGNATURE METHOD
Signed directly within the form
PTO- 1478
Approved for use through 10/31/2024. OMB 0651-0009
U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number
Trademark/Service Mark Application, Principal Register
Serial Number:97393217
Filing Date:05/03/2022
To the Commissioner for Trademarks:
MARK: GOLIATH (Standard Characters, see mark)
The literal element of the mark consists of GOLIATH. The mark consists of standard characters, without claim to any particular font style, size, or color.
The applicant, UES (Int'l) Pty Ltd, a proprietary limited company (p/l or pty. ltd.) legally organized under the laws of Australia, having an address of
10 Birmingham Street
Alexandria, NSW 2015
Australia
XXXX
requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C.
Section 1051 et seq.), as amended, for the following:
International Class 006: Metal tanks for storing water for household and industrial purposes; Metal fasteners namely spring bolts, latches, clips, pins, over-center fasteners, slide fasteners
lashing rings, metal fasteners for windows and doors, metal clevis fasteners, metal fasteners for door retainers; Locks of metal, other than electric, for doors, windows, containers and bins, metal
spring locks, slam locks, metal locking mechanisms, vector locks, whale tail locks; Metal handles for doors, windows, furniture, cabinets and containers; Metal hinges for doors, windows, furniture,
cabinets and containers; metal spring hinges; metal floor hinges; rear door hinges for vehicles; Metal tool boxes; Metal cables, metal ties, metal clamps, metal rings for cargo restraint during
transportation; Metal catch plates, door retainers, drawer slides and corner castings; Metal wheel chocks; Metal tailgate pivots, latches, fasteners, metal hinges for tailboards
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 012: Vehicle parts namely mirrors, mirror arms, vents and louvres
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 017: Buffer rubber being impact rubber for bollards, bumpers, packing and padding; Insertion rubber for sealing, mud flaps and rubber sheeting; Insulation for vehicles;
Wheel chocks of rubber or plastic; Extruded rubber for vehicles; Pinchweld rubber; Rubber protector for vehicle wheel arch
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 020: Fasteners of plastic for windows and doors; Non-metal locks for windows and doors; Non-metal handles for doors, windows, furniture, cabinets and containers; Non-metal
hinges for doors, windows, furniture, cabinets and containers; non- metal spring hinges; non-metal floor hinges; Non-metal tool boxes; Non-metal catch plates, door retainers, drawer slides and corner
castings
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
The owner's/holder's proposed attorney information: Michael A. Bondi. Other appointed attorneys are Michael Bondi, Glen Schumann, Garrett Weber. Michael A. Bondi of Moss & Barnett, is a
member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at
150 South Fifth Street, Suite 1200
Minneapolis, Minnesota 55402
United States
612-877-5307(phone)
612-877-5072(fax)
ipmab@lawmoss.com
The docket/reference number is 55741.095001.
Michael A. Bondi submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S.
Commonwealth or territory.
The applicant's current Correspondence Information:
Michael A. Bondi
PRIMARY EMAIL FOR CORRESPONDENCE: ipmab@lawmoss.com SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED
Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed,
and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).
A fee payment in the amount of $1400 has been submitted with the application, representing payment for 4 class(es).
Declaration
Declaration Signature
Signature: /Michael A. Bondi/ Date: 05/03/2022
Signatory's Name: Michael A. Bondi
Signatory's Position: Attorney of record, Minnesota bar member
Signatory's Phone Number: 612-877-5307
Signature method: Signed directly within the form
Payment Sale Number: 97393217
Payment Accounting Date: 05/03/2022
Serial Number: 97393217
Internet Transmission Date: Tue May 03 15:05:22 ET 2022
TEAS Stamp: USPTO/BAS-XXX.XX.XX.XXX-2022050315052296
2363-97393217-8205ee86515c404bdefccfc827
bf2afaab50d197b5d5afc6fa43f24cf8d84582d-
DA-05221146-20220503145143266519