Application

PTO- 1478

Approved for use through 10/31/2024. OMB 0651-0009

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

---

PTO- 1478

Approved for use through 10/31/2024. OMB 0651-0009

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

Trademark/Service Mark Application, Principal Register

Serial Number: 97311620

Filing Date: 03/14/2022

To the Commissioner for Trademarks:

MARK: DURAVENT (Standard Characters, see mark)
The literal element of the mark consists of DURAVENT. The mark consists of standard characters, without claim to any particular font style, size, or color.
The applicant, DuraVent, Inc., a corporation of Delaware, having an address of
      Grand Park Centre Building
      28 West Adams, Suite 1810
      Detroit, Michigan 48226
      United States
      XXXX

requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C. Section 1051 et seq.), as amended, for the following:

International Class 006:  Metal chimneys; metal chimney flues; metal stovepipes; pipes, clamps, and fittings therefor of metal; metal building products, namely, formed metal conduits, and metal screens both with and without shutters incorporated therein; chimneys for fuel burning appliances namely furnaces, fireplaces and stoves made primarily of metal; flexible metal connector pipes; ventilating ducts of metal; metal chimney liners; metal baseplates, couplings, tee sections, covers, rain caps, spacers, collars, stove connectors and adapters; metal chimney caps; metal chimney cowls; metallic venting pipes and tubes of metal for appliances using various fuel sources; ventilating ducts of metal; metal venting parts, namely, metal connector pipes for venting; metal pipes elbows for pipes, tees, and supports; vent adapters; alignment pipes, namely, alignment pipes of metal for venting; tee-caps, namely, metal tee-caps for venting; metal tee-caps for venting having metal latches; metal vents for venting gas appliances; roof hatches, smoke vents, floor doors and sidewalk doors; all-fuel chimney systems; chimney and pipe system installation parts made of metal, namely, flashings, split angle rings, flange adapter kits, supports, and guides; metal chimney system parts, namely supports and buckets; metal duct connectors; access doors, roof hatches, garage doors, and static heat and smoke vents, all made of metal; ventilation systems comprising metal gas vent pipes and metal chimneys; metal air duct fittings for use with air distribution systems; metal roof accessories for HVAC and plumbing installations, namely, mounting rails and flashing systems comprised of reinforced pipe flashings; metal clamps; metal roof vents for ventilation in residential and commercial buildings; ventilating metal pipes; ventilating metal liners; HVAC ductwork components and accessories made primarily of metal, namely, flanges, connectors, couplings, access doors, and hangers

In International Class 006, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 05/01/1956, and first used in commerce at least as early as 05/01/1956, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) installation and operating instructions for the goods.

Original PDF file:
SPE0-14920194120-20220314 170921785473_._Class_6.pdf
Converted PDF file(s) (14 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5
Specimen File6
Specimen File7
Specimen File8
Specimen File9
Specimen File10
Specimen File11
Specimen File12
Specimen File13
Specimen File14
Webpage URL: None Provided
Webpage Date of Access: None Provided

International Class 011:  Heating supplies and equipment, namely, chimney flues and parts therefor; gas heaters and pipes for heating and ventilating equipment and supports and parts therefor; metal gas vent pipes and fittings for use with gas appliances; flues, chimney and vent pipes being part of heating and ventilation installations and structural parts thereof, namely, pressure reducer valves, safety valves, clamps, T-pieces, connectors, reducers, drip caps, steam valves, elbow joints, tee joints, reducing couplings and drip caps, all for the aforesaid pipes and flues and all sold as a unit; furnaces; fireplaces; chimney flues; internal liners for metal chimneys, all the aforesaid goods made wholly or principally of metal; stovepipe kits comprising pipe sections, connectors and trim collars; metal gas vents; chimneys for solid fuel stoves; venting conduits for direct vent stoves and fireplaces; direct vents for gas, oil and solid fuel appliances; ventilating exhaust pipes and tubes for heating appliances using various fuel sources; ventilation apparatus, namely, pipes and pipe fittings for venting; apparatuses for filtering air, namely, air filtering apparatuses and machines for filtering air for commercial and domestic use; air filtration installations; air filtration units; air purifying apparatuses and machines; air filters for air filtration units in industrial installations; filters for air purifiers; diffusers; registers; grilles; louver valves; return faces; heat and smoke ventilators; chimney sections, pipes, expansion joints, slip joints, joints, drain plugs, elbows, tees, increasers, penetration assemblies, closure rings, storm collars, caps, stack termination caps, and cones; baseboard and floor registers; side wall registers; ventilating registers; dampers; damper kits comprising damper bearings, counterweights, chain, chain coupling and chain lock; grille frames, air volume controllers; manual air volume dampers; control grids and baffles for use with registers, grilles and diffusers for air distribution systems; damper regulators and regulator sets comprising chain, pulleys, hooks and screws packaged together; gas vent pipes and chimneys; flexible duct primarily of nonmetal for use with air distribution systems; metal air duct fittings for use with air distributions systems; registers, diffusers, and grilles used in heating, ventilation, and air conditioning systems; non-metal chimney liners; non-metal gas vents for condensing heating appliances comprising polypropylene pipes, fittings, clamps and liners; HVAC ductwork components and accessories made primarily of metal, namely, diffusers, air turning vanes and rails, and dampers, namely, control devices used in air ducts to regulate the flow of air

In International Class 011, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 05/01/1956, and first used in commerce at least as early as 05/01/1956, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) photograph of packaging with label bearing the mark.

Original PDF file:
SPE0-14920194121-20220314 184824232857_._Class_11.pdf
Converted PDF file(s) (1 page)
Specimen File1
Webpage URL: None Provided
Webpage Date of Access: None Provided

International Class 019:  Non-metal rigid pipes and fittings therefor, for gas, oil, and solid fuel appliances; pipe flashing units made of plastic and rubber for mechanically sealing pipes going through openings in roofs; flexible duct primarily of nonmetal for use with air distribution systems; non-metal roof accessories for HVAC and plumbing installations, namely, mounting rails, pipe flashing adaptors, and flashing systems comprised of reinforced pipe flashings

In International Class 019, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 03/14/2011, and first used in commerce at least as early as 03/14/2011, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) photograph of packaging with label bearing the mark.

Original PDF file:
SPE0-14920194120-20220314 170921785473_._Class_19.pdf
Converted PDF file(s) (1 page)
Specimen File1
Webpage URL: None Provided
Webpage Date of Access: None Provided



The owner's/holder's proposed attorney information: Daniel H. Bliss. Other appointed attorneys are Stephanie S. Buntin, Zachary T. Gordon, Scott M. Levin. Daniel H. Bliss of Howard & Howard Attorneys PLLC, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at
      450 West Fourth Street
      Royal Oak, Michigan 48067
      United States
      702-257-1483(phone)
      702-567-1568(fax)
      ipdocket@h2law.com
The docket/reference number is 115702.00362.
Daniel H. Bliss submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.

The applicant's current Correspondence Information:

Daniel H. Bliss

PRIMARY EMAIL FOR CORRESPONDENCE: ipdocket@h2law.com        SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): dhb@h2law.com; ag@h2law.com Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed, and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).

A fee payment in the amount of $1050 has been submitted with the application, representing payment for 3 class(es).

Declaration

	Basis: If the applicant is filing the application based on use in commerce under 15 U.S.C. § 1051(a): The signatory believes that the applicant is the owner of the trademark/service mark sought to be registered; The mark is in use in commerce and was in use in commerce as of the filing date of the application on or in connection with the goods/services in the application; The specimen(s) shows the mark as used on or in connection with the goods/services in the application and was used on or in connection with the goods/services in the application as of the application filing date; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate. And/Or If the applicant is filing the application based on an intent to use the mark in commerce under 15 U.S.C. § 1051(b), § 1126(d), and/or § 1126(e): The signatory believes that the applicant is entitled to use the mark in commerce; The applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate.
	To the best of the signatory's knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive.
	To the best of the signatory's knowledge, information, and belief, formed after an inquiry reasonable under the circumstances, the allegations and other factual contentions made above have evidentiary support.
	The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.

Declaration Signature

Signature: /Daniel H. Bliss/   Date: 03/14/2022
Signatory's Name: Daniel H. Bliss
Signatory's Position: Attorney of Record, Michigan Bar Member
Signatory's Phone Number: 702-257-1483
Signature method: Sent to third party for signature
Payment Sale Number: 97311620
Payment Accounting Date: 03/14/2022

Serial Number: 97311620
Internet Transmission Date: Mon Mar 14 18:57:20 ET 2022
TEAS Stamp: USPTO/BAS-XXX.XX.XXX.XXX-202203141857205
02008-97311620-82094cc0e3227ab14345bc102
f389c2256b397bef28f1dcb4d18a9a836ff2d4d9
-CC-57191733-20220314184824232857