|
NOTICE OF ALLOWANCE (NOA)
ISSUE DATE: Jul 4, 2023 |
U.S. Serial Number: 97311437
Mark: DURAVENT (Stylized/Design)
Docket/Reference Number: DRVT0053TA
|
| No opposition was filed for this published application. The issue date of this NOA establishes the due date for the filing of
a Statement of Use (SOU) or a Request for Extension of Time to file a Statement of Use (Extension Request). WARNING: An SOU that meets all legal requirements must be filed before a registration
certificate can issue. Please read below for important information regarding the applicant's pending six (6) month deadline. |
| SIX (6)-MONTH DEADLINE: Applicant has six (6) MONTHS from the NOA issue date to file either: |
| - |
An SOU, if the applicant is using the mark in commerce (required even if the applicant was using the mark at the time of filing the
application, if use basis was not specified originally); OR |
| - |
An Extension Request, if the applicant is not yet using the mark in commerce. If an Extension Request is filed, a new request must
be filed every six (6) months until the SOU is filed. The applicant may file a total of five (5) extension requests. WARNING: An SOU may not be filed more than thirty-six
(36) months from when the NOA issued. The deadline for filing is always calculated from the issue date of the NOA. |
How to file SOU and/or Extension Request:
Use the Trademark Electronic Application System (TEAS). Do NOT reply to this e-mail, as e-mailed filings will NOT be processed. Both the SOU and Extension Request have many
legal requirements, including fees and verified statements; therefore, please use the USPTO forms available online at http://www.gov.uspto.report/trademarks-application-process/filing-online (under the "INTENT-TO-USE (ITU) FORMS" category) to avoid the possible omission of required information.
If you have questions about this notice, please contact the Trademark Assistance Center at 1-800-786-9199. |
| FAILURE TO FILE A REQUIRED DOCUMENT OUTLINED ABOVE DURING THE APPROPRIATE TIME PERIOD WILL RESULT IN THE ABANDONMENT OF THIS
APPLICATION. |
REVIEW APPLICATION INFORMATION FOR ACCURACY |
| Serial Number: |
97311437
|
| Mark: |
DURAVENT (Stylized/Design)
|
| Docket/Reference Number: |
DRVT0053TA
|
| Owner: |
DuraVent, Inc.
Grand Park Centre Building
28 West Adams, Suite 1810
Detroit , MICHIGAN 48226
|
| Correspondence Address: |
Gary Donohue
Dinsmore & Shohl LLP
900 Wilshire Drive STE 300
Troy MI 48084
|
This application has the following bases, but not necessarily for all listed goods/services: |
|
Section 1(a): NO |
Section 1(b): YES |
Section 44(e): NO |
| GOODS/SERVICES BY INTERNATIONAL CLASS |
| 006 - |
Metal chimneys; metal stovepipes; pipes, clamps, and fittings therefor of metal; metal building products, namely, formed metal conduits, and metal screens both
with and without shutters incorporated therein; chimneys for fuel burning appliances, namely, furnaces, fireplaces and stoves made primarily of metal; flexible metal connector pipes; ventilating
ducts of metal; metal chimney liners; metal chimney parts, namely, metal baseplates, couplings, tee sections, covers, rain caps, spacers, collars, stove connectors and adapters; metal chimney caps;
metal chimney cowls; metallic venting pipes and tubes of metal for appliances using various fuel sources; metal venting parts, namely, metal connector pipes for venting; metal pipes elbows for pipes,
tees, and supports; metal vent adapters for chimneys; alignment pipes, namely, alignment pipes of metal for venting; tee-caps, namely, metal tee-caps for venting; metal tee-caps for venting having
metal latches; metal vents for venting gas appliances; metal roof hatches, smoke vents, floor doors and sidewalk doors; metal all-fuel chimney systems composed of metal lengths, elbows, tees, and
metal chimney supports; chimney and pipe system installation parts made of metal, namely, flashings, split angle rings, flange adapter kits, supports, and guides ; metal chimney system parts, namely,
supports and buckets; metal duct connectors; access doors, roof hatches, garage doors, and static heat and smoke vents, all made of metal; ventilation systems comprising metal gas vent pipes and
metal chimneys; metal air duct fittings for use with air distribution systems; metal roof accessories for HVAC and plumbing installations, namely, mounting rails and flashing systems comprised of
reinforced pipe flashings; metal clamps; metal roof vents for ventilation in residential and commercial buildings; ventilating metal pipes; ventilating metal liners; HVAC ductwork components and
accessories made primarily of metal, namely, flanges, connectors, couplings, access doors, and hangers; chimney parts primarily of metal, namely, chimney sections, pipes, expansion joints, slip
joints, joints, drain plugs, elbows, tees, increasers, penetration assemblies, closure rings, storm collars, caps, stack termination caps, and cones; metal air duct fittings for use with air
distributions systems -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
| 011 - |
Metal chimney flues; Heating supplies and equipment, namely, chimney flues and structural parts therefor; gas heaters and pipes for air heating and ventilating
equipment and structural supports and parts therefor; metal gas vent pipes and fittings for use with gas appliances; flues, chimney and vent pipes being part of heating and ventilation installations
and structural parts thereof, namely, pressure reducer valves, safety valves, clamps, T-pieces, connectors, reducers, drip caps, steam valves, elbow joints, tee joints, reducing couplings and drip
caps, all for the aforesaid pipes and flues and all sold as a unit; furnaces; fireplaces; chimney flues; internal flue liners for metal chimneys, all the aforesaid goods made wholly or principally of
metal; stovepipe kits for connecting stoves to chimneys comprising pipe sections, connectors and trim collars; metal direct vents for gas appliances; chimneys for solid fuel stoves; venting conduits
for direct vent stoves and fireplaces; direct vents for gas, oil and solid fuel appliances; ventilating exhaust pipes and tubes for heating appliances using various fuel sources; ventilation
apparatus, namely, pipes and pipe fittings for venting; apparatuses for filtering air, namely, air filtering installations and machines for filtering air for commercial and domestic use; air
filtration installations; air filtration units; air purifying apparatuses and machines; air filters for air filtration units in industrial installations; filters for air purifiers; diffusers, namely,
heat diffusion collars and discs for use in furnaces; heat registers; grilles for ventilation; louver valves for ventilation; return faces for ventilation; heat and smoke ventilators; heat registers
for baseboard and floor; heat registers for side wall; heat registers for ventilation; chimney dampers; chimney damper kits comprising chimney damper bearings, counterweights, chain, chain coupling
and chain lock; grille frames for ventilation, air volume controllers for ventilation; manual air volume dampers; control grids and baffles for use with registers, grilles and diffusers for air
distribution systems; damper regulators and regulator sets to regulate the flow of air comprising chain, pulleys, hooks and screws packaged together; direct vent pipes and chimneys for gas
appliances; flexible duct primarily of nonmetal as part of air distribution systems; metal air duct fittings as part of air distributions systems; registers, diffusers, and grilles used in heating,
ventilation, and air conditioning systems; non-metal chimney flue liners; non-metal gas vents for use in air condensing and heating appliances comprising polypropylene pipes, fittings, clamps and
liners; HVAC ductwork components and accessories made primarily of metal, namely, diffusers, air turning vanes and rails, and dampers, namely, control devices used in air ducts to regulate the flow
of air -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
| 019 - |
Non-metal rigid pipes and fittings therefor, for gas, oil, and solid fuel appliances; pipe flashing units made of plastic and rubber for mechanically sealing
pipes going through openings in roofs; flexible duct primarily of nonmetal for use with air distribution systems; non-metal roof accessories for HVAC and plumbing installations, namely, mounting
rails, pipe flashing adaptors, and flashing systems comprised of reinforced pipe flashings; chimney parts that are primarily non-metal, namely, chimney sections, pipes, expansion joints, slip joints,
joints, drain plugs, elbows, tees, increasers, penetration assemblies, closure rings, storm collars, caps, stack termination caps, and cones -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE:
NONE |
ALL OF THE GOODS/SERVICES IN EACH CLASS ARE LISTED.
|
| Appropriate Specimens for Goods and/or Services: A trademark specimen should be a label, tag, or container for the goods, or a
display associated with the goods. See TMEP §§904.03 et seq. A service mark specimen should be an advertisement, sign, brochure, website printout or other image that shows the mark used in the actual
sale or advertising of the services. See TMEP §§1301.04 et seq. For an instructional video on what is an appropriate trademark or service mark specimen for a good and/or service, click here. |
| Fraudulent statements may result in registration being cancelled: Applicants must ensure that statements made in filings to the
USPTO are accurate, as inaccuracies may result in the cancellation of any issued trademark registration. The lack of a bona fide intention to use the mark with ALL goods and/or services listed
in an application or the lack of actual use on all goods and/or services for which use is claimed could jeopardize the validity of the registration, possibly resulting in its
cancellation. |
| Additional information: For information on filing and maintenance requirements for U.S. trademark applications and registrations
and required fees, please consult the USPTO website at http://www.uspto.gov or call the Trademark Assistance Center at 1-800-786-9199. |
|