Trademark/Service Mark Application, Principal Register
PTO- 1478
Approved for use through 10/31/2024. OMB 0651-0009
U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number
Trademark/Service Mark Application, Principal Register
*DESCRIPTION OF THE MARK
(and Color Location, if applicable)
The mark consists of the letters LSP in stylized form.
PIXEL COUNT ACCEPTABLE
YES
PIXEL COUNT
640 x 480
REGISTER
Principal
APPLICANT INFORMATION
*OWNER OF MARK
LSP Products Group, Inc.
INTERNAL ADDRESS
6N Legal
*MAILING ADDRESS
2727 Chemsearch Boulevard
*CITY
Irving
*STATE
(Required for U.S. applicants)
Texas
*COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
*ZIP/POSTAL CODE
(Required for U.S. and certain international addresses)
75062
PHONE
972-438-0211
FAX
972-438-0100
*EMAIL ADDRESS
XXXX
WEBSITE ADDRESS
www.lspproducts.com
LEGAL ENTITY INFORMATION
TYPE
corporation
STATE/COUNTRY/REGION/JURISDICTION/U.S. TERRITORY OF INCORPORATION
Nevada
GOODS AND/OR SERVICES AND BASIS INFORMATION
INTERNATIONAL CLASS
001
*IDENTIFICATION
Chemical preparations, namely cleaning solvents for use on cement in the plumbing industry
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
002
*IDENTIFICATION
Chemical solvent primers for preparing cement surfaces to be painted in the plumbing industry; Coatings in the nature of industrial chemical
sealants for use in the plumbing industry for waterproofing and surface hardening
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
006
*IDENTIFICATION
Toilet flanges made of metal; metal pipe clamps and pipe supports in the nature of metal fasteners, namely, metal clamps for fastening pipes;
metal roof vent flashing; flexible metal hoses with connectors for interconnecting diverse plumbing fixtures; metal hangers for use with plumber's tape for use in securing pipes; metal floor access
drain covers in the nature of metal vent covers for drains; plumbing parts, namely, metal pipe connectors for faucets, toilets, dishwashers, washing machines, water heaters and ice makers; metal
water closet stabilizers to secure toilet fixtures to the floor
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
007
*IDENTIFICATION
Stands for machines, namely, water heaters; and machine apparatus, namely, drain pans specially adapted for dish and textile washing machines
for the capture and containment of liquids or other waste
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
009
*IDENTIFICATION
Outlet boxes in the nature of junction boxes for washing machines, natural gas and icemakers; electric junction box housings, namely, access
panels and covers for coupling boxes for washing machines, gas heaters and icemakers
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
011
*IDENTIFICATION
Structural plumbing parts, namely, fittings in the nature of ball valves, water hammer arresters, and rapid adjust trip flush levers;
structural sink and bath parts, namely overflow plates in the nature of sink and bath overflows and sink strainers; structural plumbing fittings in the nature of toilet parts, namely, dual flush
toilet valves, toilet flappers in the nature of valve seals specially adapted for toilet tanks, toilet fill valves; toilet fixtures and fittings for sealing the closet flange position between a
toilet and the floor, namely, non-metal sealing rings specially adapted for toilets; water filtration units and water softener units comprised of water purification tanks, sediment pre-filters, and
copper-zinc, mineral stone and activated carbon filters; non-metal plumbing fittings, namely, air valves for drain pipes, waste pipes and vent pipes; tub parts, namely, non-metal tub overflows for
pipe leakage; plumbing fittings, namely, floor drains, roof drains, area drains, deck drains, clean out drains and shower drains made of metal or plastic for use in industrial, commercial and
residential buildings
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
017
*IDENTIFICATION
Non-metal hoses, foam and rubber pipe insulation, and adhesive tape for use in the plumbing industry; plastic protectors in the nature of
plastic padding for impact protection for tubs and showers; pipe insulation; non-metal toilet flanges; non-metal sealing plugs made primarily from rubber for use in testing pipe pressure; non-metal
pipe clamps for fastening pipes; non-metal pipe protectors in the nature of plastic padding for impact protection for protecting pipes during installation; and flexible non-metal hoses with
connectors for interconnecting diverse plumbing fixtures
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
019
*IDENTIFICATION
Non-metal roof vent flashings; non-metallic construction materials, namely, non-metal roof and deck drain pipes and grates; non-metallic
construction materials, namely, non-metal spacers for use for creating pipe cavities in concrete for construction purposes; non-metal drain elbows for pipes; non-metallic construction materials,
namely, non-metal tub trap boxes for creating tub trap cavities in concrete for construction purposes; non-metal roof vent flashing and roof shields in the nature of non-metal roof coverings; and
non-metal floor access drain covers in the nature of non-metal vent covers for drains
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
020
*IDENTIFICATION
Non-metal pipe clamps; non-metal sealing caps for use in testing pipe pressure; non-metal pipe clamps for fastening pipes; non-metal pipe
hangers for drain pipes, waste pipes and vent pipes; non-metal hangers for use with plumbers tape for use in securing pipes; pipe supports in the nature of non-metal clamps for fastening pipes
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
021
*IDENTIFICATION
Structural sink and bath parts, namely, drain stoppers for sinks and drains
FILING BASIS
SECTION 1(b)
ATTORNEY INFORMATION
NAME
Edyta Zydorek
ATTORNEY DOCKET NUMBER
T00697US00
ATTORNEY BAR MEMBERSHIP NUMBER
XXX
YEAR OF ADMISSION
XXXX
U.S. STATE/ COMMONWEALTH/ TERRITORY
XX
FIRM NAME
NCH Corporation
INTERNAL ADDRESS
6N Legal
STREET
2727 Chemsearch Boulevard
CITY
Irving
STATE
Texas
COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
ZIP/POSTAL CODE
75062
PHONE
972-438-0211
FAX
972-438-0100
EMAIL ADDRESS
Edyta.Zydorek@nch.com
CORRESPONDENCE INFORMATION
NAME
Edyta Zydorek
PRIMARY EMAIL ADDRESS FOR CORRESPONDENCE
Edyta.Zydorek@nch.com
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES)
nch.ip@nch.com
FEE INFORMATION
APPLICATION FILING OPTION
TEAS Standard
NUMBER OF CLASSES
10
APPLICATION FOR REGISTRATION PER CLASS
350
*TOTAL FEES DUE
3500
*TOTAL FEES PAID
3500
SIGNATURE INFORMATION
SIGNATURE
/Edyta Zydorek/
SIGNATORY'S NAME
Edyta Zydorek
SIGNATORY'S POSITION
Assistant Secretary
SIGNATORY'S PHONE NUMBER
972-438-0211
DATE SIGNED
02/17/2022
SIGNATURE METHOD
Signed directly within the form
PTO- 1478
Approved for use through 10/31/2024. OMB 0651-0009
U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number
Trademark/Service Mark Application, Principal Register
Serial Number:97272820
Filing Date:02/17/2022
To the Commissioner for Trademarks:
MARK: LSP (stylized and/or with design, see mark)
The literal element of the mark consists of LSP. The applicant is not claiming color as a feature of the mark. The mark consists of the letters LSP in stylized form.
The applicant, LSP Products Group, Inc., a corporation of Nevada, having an address of
6N Legal
2727 Chemsearch Boulevard
Irving, Texas 75062
United States
972-438-0211(phone)
972-438-0100(fax)
XXXX
requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C.
Section 1051 et seq.), as amended, for the following:
International Class 001: Chemical preparations, namely cleaning solvents for use on cement in the plumbing industry
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 002: Chemical solvent primers for preparing cement surfaces to be painted in the plumbing industry; Coatings in the nature of industrial chemical sealants for use in the
plumbing industry for waterproofing and surface hardening
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 006: Toilet flanges made of metal; metal pipe clamps and pipe supports in the nature of metal fasteners, namely, metal clamps for fastening pipes; metal roof vent flashing;
flexible metal hoses with connectors for interconnecting diverse plumbing fixtures; metal hangers for use with plumber's tape for use in securing pipes; metal floor access drain covers in the nature
of metal vent covers for drains; plumbing parts, namely, metal pipe connectors for faucets, toilets, dishwashers, washing machines, water heaters and ice makers; metal water closet stabilizers to
secure toilet fixtures to the floor
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 007: Stands for machines, namely, water heaters; and machine apparatus, namely, drain pans specially adapted for dish and textile washing machines for the capture and
containment of liquids or other waste
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 009: Outlet boxes in the nature of junction boxes for washing machines, natural gas and icemakers; electric junction box housings, namely, access panels and covers for
coupling boxes for washing machines, gas heaters and icemakers
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 011: Structural plumbing parts, namely, fittings in the nature of ball valves, water hammer arresters, and rapid adjust trip flush levers; structural sink and bath parts,
namely overflow plates in the nature of sink and bath overflows and sink strainers; structural plumbing fittings in the nature of toilet parts, namely, dual flush toilet valves, toilet flappers in
the nature of valve seals specially adapted for toilet tanks, toilet fill valves; toilet fixtures and fittings for sealing the closet flange position between a toilet and the floor, namely, non-metal
sealing rings specially adapted for toilets; water filtration units and water softener units comprised of water purification tanks, sediment pre-filters, and copper-zinc, mineral stone and activated
carbon filters; non-metal plumbing fittings, namely, air valves for drain pipes, waste pipes and vent pipes; tub parts, namely, non-metal tub overflows for pipe leakage; plumbing fittings, namely,
floor drains, roof drains, area drains, deck drains, clean out drains and shower drains made of metal or plastic for use in industrial, commercial and residential buildings
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 017: Non-metal hoses, foam and rubber pipe insulation, and adhesive tape for use in the plumbing industry; plastic protectors in the nature of plastic padding for impact
protection for tubs and showers; pipe insulation; non-metal toilet flanges; non-metal sealing plugs made primarily from rubber for use in testing pipe pressure; non-metal pipe clamps for fastening
pipes; non-metal pipe protectors in the nature of plastic padding for impact protection for protecting pipes during installation; and flexible non-metal hoses with connectors for interconnecting
diverse plumbing fixtures
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 019: Non-metal roof vent flashings; non-metallic construction materials, namely, non-metal roof and deck drain pipes and grates; non-metallic construction materials, namely,
non-metal spacers for use for creating pipe cavities in concrete for construction purposes; non-metal drain elbows for pipes; non-metallic construction materials, namely, non-metal tub trap boxes for
creating tub trap cavities in concrete for construction purposes; non-metal roof vent flashing and roof shields in the nature of non-metal roof coverings; and non-metal floor access drain covers in
the nature of non-metal vent covers for drains
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 020: Non-metal pipe clamps; non-metal sealing caps for use in testing pipe pressure; non-metal pipe clamps for fastening pipes; non-metal pipe hangers for drain pipes, waste
pipes and vent pipes; non-metal hangers for use with plumbers tape for use in securing pipes; pipe supports in the nature of non-metal clamps for fastening pipes
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 021: Structural sink and bath parts, namely, drain stoppers for sinks and drains
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
For informational purposes only, applicant's website address is: www.lspproducts.com
The owner's/holder's proposed attorney information: Edyta Zydorek. Edyta Zydorek of NCH Corporation, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, is located
at
6N Legal
2727 Chemsearch Boulevard
Irving, Texas 75062
United States
972-438-0211(phone)
972-438-0100(fax)
Edyta.Zydorek@nch.com
The docket/reference number is T00697US00.
Edyta Zydorek submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S.
Commonwealth or territory.
The applicant's current Correspondence Information:
Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed,
and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).
A fee payment in the amount of $3500 has been submitted with the application, representing payment for 10 class(es).
Declaration
Declaration Signature
Signature: /Edyta Zydorek/ Date: 02/17/2022
Signatory's Name: Edyta Zydorek
Signatory's Position: Assistant Secretary
Signatory's Phone Number: 972-438-0211
Signature method: Signed directly within the form
Payment Sale Number: 97272820
Payment Accounting Date: 02/17/2022
Serial Number: 97272820
Internet Transmission Date: Thu Feb 17 20:04:04 ET 2022
TEAS Stamp: USPTO/BAS-XX.XX.X.XX-2022021720040416514
1-97272820-81077eba88a8cf31f038b213fc8d4
6a2c1d4e197e567c0e231cf1a406026329f94-CC
-04034514-20220217195232708895