Application

PTO- 1478

Approved for use through 10/31/2024. OMB 0651-0009

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

---

PTO- 1478

Approved for use through 10/31/2024. OMB 0651-0009

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

Trademark/Service Mark Application, Principal Register

Serial Number: 97162094

Filing Date: 12/08/2021

To the Commissioner for Trademarks:

MARK: VC3 (stylized and/or with design, see mark)
The literal element of the mark consists of VC3. The applicant is not claiming color as a feature of the mark. The mark consists of the letters "V" and "C" and the number "3" in superscript.
The applicant, Arelac, Inc., a corporation of Delaware, having an address of
      251 E Hacienda Avenue
      Campbell, California 95008
      United States
      XXXX

requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C. Section 1051 et seq.), as amended, for the following:

International Class 001:  calcium carbonate; calcium carbonate polymorphs, namely, vaterite and aragonite
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

International Class 019:  non-metallic construction materials, namely, mineral-based cementitious materials in the nature of vaterite, portland, hydraulic, white, masonry, plastic, stucco, and oil well cement; non-metallic construction materials in the nature of other mineral-based cementitious materials and pozzolanic materials, namely, clay, calcined clay, shale, limestone, blast furnace slag, coal clinker and fly ash; non-metallic construction materials, namely, cement mixes and patches, concrete, mortar, stone, aggregate, sand, mosaic, tiles, lime, plaster, gypsum, gravel, brick, roofing tiles, floor tiles, masonry units, segmental retaining wall systems comprised primarily of cement, asphalt, and felt paper in the nature of nonwoven textile fabrics for use in construction; building materials made from concrete, namely, blocks, bricks, stones, walls, conduits, ducts, pavers, posts, pedestals, beams, partitions, barriers, pipes, modules, panels, columns, monuments, containers, curbs, bases in the nature of concrete blocks, slabs, fences, planks, non-metal water storage boxes and basins for collecting and storing water; limestone
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

International Class 037:  technical consulting services in the field of construction of plants for manufacturing cement or cementitious materials
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

International Class 040:  technical consulting services in the field of cement manufacturing; providing technical information in the field of cement manufacturing
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

International Class 042:  industrial and scientific research in the field of cement manufacturing; scientific consulting services in the field of cement manufacturing
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

International Class 045:  licensing of intellectual property in the field of cement manufacturing processes; licensing of scientific and industrial designs and technologies in the field of cement manufacturing processes
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.




The owner's/holder's proposed attorney information: Christine K. Au-Yeung. Other appointed attorneys are all other attorneys of Wilson Sonsini Goodrich & Rosati. Christine K. Au-Yeung of Wilson Sonsini Goodrich & Rosati, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at
      650 Page Mill Road
      Palo Alto, California 94304-1050
      United States
      650-493-9300(phone)
      650-493-6811(fax)
      trademarks@wsgr.com
The docket/reference number is 56783-TM1035.
Christine K. Au-Yeung submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.

The applicant's current Correspondence Information:

Christine K. Au-Yeung

PRIMARY EMAIL FOR CORRESPONDENCE: trademarks@wsgr.com       SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed, and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).

A fee payment in the amount of $2100 has been submitted with the application, representing payment for 6 class(es).

Declaration

	Basis: If the applicant is filing the application based on use in commerce under 15 U.S.C. § 1051(a): The signatory believes that the applicant is the owner of the trademark/service mark sought to be registered; The mark is in use in commerce and was in use in commerce as of the filing date of the application on or in connection with the goods/services in the application; The specimen(s) shows the mark as used on or in connection with the goods/services in the application and was used on or in connection with the goods/services in the application as of the application filing date; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate. And/Or If the applicant is filing the application based on an intent to use the mark in commerce under 15 U.S.C. § 1051(b), § 1126(d), and/or § 1126(e): The signatory believes that the applicant is entitled to use the mark in commerce; The applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate.
	To the best of the signatory's knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive.
	To the best of the signatory's knowledge, information, and belief, formed after an inquiry reasonable under the circumstances, the allegations and other factual contentions made above have evidentiary support.
	The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.

Declaration Signature

Signature: /Ryan J. Gilliam/   Date: 12/06/2021
Signatory's Name: Ryan Gilliam
Signatory's Position: Chief Executive Officer
Signatory's Phone Number: 000-000-0000
Signature method: Sent to third party for signature
Payment Sale Number: 97162094
Payment Accounting Date: 12/08/2021

Serial Number: 97162094
Internet Transmission Date: Wed Dec 08 13:09:39 ET 2021
TEAS Stamp: USPTO/BAS-XXX.X.XXX.XXX-2021120813093972
3701-97162094-7811145ec9e9d7a3aa723cb257
918e7137f554a77dafb788c9b812e36d39227c4e
1-DA-09394696-20211202120148627021