The mark consists of a three dimensional configuration of a portion of the front face of an audio horn. The broken lines are not part of the mark and serve to only show the position or placement of the mark.
Mark For: This trademark registration is intended to cover the category of conical attachment to an audio speaker for diffusing and distributing sound as it is transmitted from the speaker.
Status
2021-10-07 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
(Electrical and scientific apparatus) Scientific, nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signaling, checking (supervision), lifesaving and teaching apparatus and instruments; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Peter A. Matos
Attorney Docket Number
3757.41173
Timeline
2012-05-03
Date of First Use
2012-05-22
Date of Use In Commerce
2021-10-04
Application Filed
2021-10-07
Location: NEW APPLICATION PROCESSING
2021-10-07
Status: Live/Pending
2021-10-07
Status: New application will be assigned to an examining attorney approximately 6 months after filing date.
Brass instruments, including trumpets, bugles, tubas, trombones, hunting horns and post horns; Bugles; Trombones; Trumpets; Tubas
Attorney of Record
PETER A. MATOS MALLOY & MALLOY, P.L. 2800 SW 3RD AVENUE MIAMI, FL 33129
Good, Services, and Codes
International Codes:
9
U.S. Codes:
021,023,026,036,038
International Codes:
12
U.S. Codes:
019,021,023,031,035,044
Type Code
Type
DM0000
The mark consists of a three dimensional configuration of a portion of the front face of an audio horn. The broken lines are not part of the mark and serve to only show the position or placement of the mark.
DM0000
The mark consists of a three-dimensional configuration of a portion of the front face of an audio horn with an overall square shape and having corners that are tapered with a flat oval like shaped surface along the outer periphery border of each corner. The tapered or stepped corners with the flat periphery make up the claimed mark. The broken lines are not part of the mark and serve to only show the position or placement of the mark.
Trademark Filing History
Description
Date
Proceeding Number
NEW APPLICATION ENTERED IN TRAM
2021-10-07
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.