The mark consists of capital case block letters spelling out the word "SYNERGY." The "S" is shown in three parts with a curved semi-circle the thicker portion shown above, a solid circle in the middle and the inverse of the semi-circle on the bottom the thicker portion shown beneath. Above the letters "YNERGY" is a bold bar that extends from the upper semi-circle over the "S" with a slight separation where the letter "Y" begins.
Mark For: SYNERGY™ trademark registration is intended to cover the categories of angle and Plate Bending Machinery, namely for bending metal into shapes with radii.
Status
2020-10-04 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Frank A. Natoli, Esq.
Timeline
2020-09-30
Application Filed
2020-10-03
Location: NEW APPLICATION PROCESSING
2020-10-03
Status: Live/Pending
2020-10-03
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
Geometric figures forming letters, numerals or punctuation
Attorney of Record
FRANK A. NATOLI, ESQ. NATOLI-LEGAL, LLC 305 BROADWAY, 7TH FLOOR NEW YORK, NY 10007
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
Type Code
Type
DM0000
The mark consists of capital case block letters spelling out the word "SYNERGY." The "S" is shown in three parts with a curved semi-circle the thicker portion shown above, a solid circle in the middle and the inverse of the semi-circle on the bottom the thicker portion shown beneath. Above the letters "YNERGY" is a bold bar that extends from the upper semi-circle over the "S" with a slight separation where the letter "Y" begins.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Trilogy Machinery, Inc.
Application
Drawing
| 