Mark For: DYNOMOUNT® trademark registration is intended to cover the categories of machines and machine tools, all for use in the metal working industry, namely, punches, dies, strippers, punch holders, die holders and tool holders for machine punch presses; machine tools, namely, clamps, vises and jaws for use in the precision clamping of work pieces; machine parts, namely, work holding fixtures for precision machining applications; and parts and replacement parts for all the above.
Status
2020-09-22 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Jennifer C. Debrow
Attorney Docket Number
50845US024
Timeline
2020-09-17
Application Filed
2020-09-21
Location: NEW APPLICATION PROCESSING
2020-09-21
Status: Live/Pending
2020-09-21
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
JENNIFER C. DEBROW LATHROP GPM LLP 500 IDS CENTER, 80 SOUTH EIGHTH STREET MINNEAPOLIS, MN 55402
Good, Services, and Codes
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
International Codes:
8
U.S. Codes:
023,028,044
Type Code
Type
GS0071
Machines and machine tools, all for use in the metal working industry, namely, punches, dies, strippers, punch holders, die holders and tool holders for machine punch presses; machine tools, namely, clamps, vises and jaws for use in the precision clamping of work pieces; machine parts, namely, work holding fixtures for precision machining applications; and parts and replacement parts for all the above
GS0071
Machines and machine tools, all for use in the metal working industry, namely, punches, dies, strippers, punch holders, die holders and tool holders for machine punch presses; machine tools, namely, clamps, vises and jaws for use in the precision clamping of work pieces; machine parts, namely, work holding fixtures for precision machining applications; and parts and replacement parts for all the above
Trademark Filing History
Description
Date
Proceeding Number
NEW APPLICATION ENTERED IN TRAM
2020-09-21
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
Mate Precision Technologies Inc
Application
Drawing
| 