To: | Brooks Automation, Inc. (trademarks@hbsr.com) |
Subject: | U.S. Trademark Application Serial No. 90129797 - PUROMAXX - 0100.0556-00 |
Sent: | December 18, 2020 11:47:08 AM |
Sent As: | ecom120@uspto.gov |
Attachments: | Attachment - 1 Attachment - 2 Attachment - 3 Attachment - 4 Attachment - 5 Attachment - 6 Attachment - 7 Attachment - 8 Attachment - 9 Attachment - 10 Attachment - 11 Attachment - 12 Attachment - 13 Attachment - 14 Attachment - 15 Attachment - 16 |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 90129797
Mark: PUROMAXX
|
|
Correspondence Address: HAMILTON, BROOK, SMITH & REYNOLDS, P.C. 530 VIRGINIA ROAD, P.O. BOX 9133
|
|
Applicant: Brooks Automation, Inc.
|
|
Reference/Docket No. 0100.0556-00
Correspondence Email Address: |
|
NONFINAL OFFICE ACTION
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: December 18, 2020
Summary of Issues:
Section 2(d) Refusal – Likelihood of Confusion
Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 4884023 (PUREMAX TRI-FUNCTIONAL with design). Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq. See the attached registration.
In any likelihood of confusion determination, two key considerations are similarity of the marks and similarity or relatedness of the goods. In re Aquamar, Inc., 115 USPQ2d 1122, 1126 (TTAB 2015) (citing Federated Foods, Inc. v. Fort Howard Paper Co., 544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976)); In re Iolo Techs., LLC, 95 USPQ2d 1498, 1499 (TTAB 2010); see TMEP §1207.01. That is, the marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression. In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973)); TMEP §1207.01(b)-(b)(v). Additionally, the goods are compared to determine whether they are similar or commercially related or travel in the same trade channels. See Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369-71, 101 USPQ2d 1713, 1722-23 (Fed. Cir. 2012); Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1165, 64 USPQ2d 1375, 1381 (Fed. Cir. 2002); TMEP §1207.01, (a)(vi).
Comparison of Marks
Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression. Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v). “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.” In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)), aff’d per curiam, 777 F. App’x 516, 2019 BL 343921 (Fed. Cir. 2019); TMEP §1207.01(b).
Registrant’s mark is PUREMAX TRI-FUNCTIONAL FILTER with design. Applicant’s mark is PUROMAXX. The marks are in part identical and as such have similar overall commercial impressions.
Registrant’s mark has a design. When evaluating a composite mark consisting of words and a design, the word portion is normally accorded greater weight because it is likely to make a greater impression upon purchasers, be remembered by them, and be used by them to refer to or request the goods. In re Aquitaine Wine USA, LLC, 126 USPQ2d 1181, 1184 (TTAB 2018) (citing In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012)); TMEP §1207.01(c)(ii). Thus, although marks must be compared in their entireties, the word portion is often considered the dominant feature and is accorded greater weight in determining whether marks are confusingly similar, even where the word portion has been disclaimed. In re Viterra Inc., 671 F.3d at 1366-67, 101 USPQ2d at 1911 (citing Giant Food, Inc. v. Nation’s Foodservice, Inc., 710 F.2d 1565, 1570-71, 218 USPQ2d 390, 395 (Fed. Cir. 1983)).
When comparing the word elements, registrant has properly disclaimed TRI-FUNCTIONAL FILTER as descriptive. Although marks are compared in their entireties, one feature of a mark may be more significant or dominant in creating a commercial impression. See In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Nat’l Data Corp., 753 F.2d 1056, 1058, 224 USPQ 749, 751 (Fed. Cir. 1985); TMEP §1207.01(b)(viii), (c)(ii). Disclaimed matter that is descriptive of or generic for a party’s goods is typically less significant or less dominant when comparing marks. In re Detroit Athletic Co., 903 F.3d 1297, 1305, 128 USPQ2d 1047, 1050 (Fed. Cir. 2018) (citing In re Dixie Rests., Inc., 105 F.3d 1405, 1407, 41 USPQ2d 1531, 1533-34 (Fed. Cir. 1997)); TMEP §1207.01(b)(viii), (c)(ii).
Given this, the dominant part of registrant’s mark is PUREMAX. Both this and applicant’s mark begin with the identical syllable, PUR. Consumers are generally more inclined to focus on the first syllable in any trademark. See Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1372, 73 USPQ2d 1689, 1692 (Fed. Cir. 2005) (finding similarity between VEUVE ROYALE and two VEUVE CLICQUOT marks in part because “VEUVE . . . remains a ‘prominent feature’ as the first word in the mark and the first word to appear on the label”); Century 21 Real Estate Corp. v. Century Life of Am., 970 F.2d 874, 876, 23 USPQ2d 1698, 1700 (Fed Cir. 1992) (finding similarity between CENTURY 21 and CENTURY LIFE OF AMERICA in part because “consumers must first notice th[e] identical lead word”); see also In re Detroit Athletic Co., 903 F.3d 1297, 1303, 128 USPQ2d 1047, 1049 (Fed. Cir. 2018) (finding “the identity of the marks’ two initial words is particularly significant because consumers typically notice those words first”).
Additionally, the dominant part of registrant’s mark ends with MAX, while applicant’s mark ends with MAXX. Overall, the look of PUREMAX and PUROMAXX is very similar, as is the sound. Slight differences in the sound of similar marks will not avoid a likelihood of confusion. In re Energy Telecomms. & Elec. Ass’n, 222 USPQ 350, 351 (TTAB 1983); see In re Viterra Inc., 671 F.3d 1358, 1367, 101 USPQ2d 1905, 1912 (Fed. Cir. 2012).
When comparing marks, “[t]he proper test is not a side-by-side comparison of the marks, but instead whether the marks are sufficiently similar in terms of their commercial impression such that [consumers] who encounter the marks would be likely to assume a connection between the parties.” Cai v. Diamond Hong, Inc., 901 F.3d 1367, 1373, 127 USPQ2d 1797, 1801 (Fed. Cir. 2018) (quoting Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1368, 101 USPQ2d 1713, 1721 (Fed. Cir. 2012)); TMEP §1207.01(b). The proper focus is on the recollection of the average purchaser, who retains a general rather than specific impression of trademarks. In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re St. Helena Hosp., 774 F.3d 747, 750-51, 113 USPQ2d 1082, 1085 (Fed. Cir. 2014); Geigy Chem. Corp. v. Atlas Chem. Indus., Inc., 438 F.2d 1005, 1007, 169 USPQ 39, 40 (C.C.P.A. 1971)), aff’d per curiam, 777 F. App’x 516, 2019 BL 343921 (Fed. Cir. 2019); TMEP §1207.01(b).
For the above reasons, applicant’s and registrant’s marks have a similar overall commercial impression, and as such, are confusingly similar.
Comparison of Goods
Registrant’s goods, in pertinent part, are, “filtering machines; filters as parts of machines or engines.”
Applicant’s goods, in pertinent part, are, “devices and machines for contamination control in semiconductor device manufacturing; devices and machines for cleaning wafer carriers; devices and machines for cleaning reticle carriers.”
The goods of the parties need not be identical or even competitive to find a likelihood of confusion. See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000) (“[E]ven if the goods in question are different from, and thus not related to, one another in kind, the same goods can be related in the mind of the consuming public as to the origin of the goods.”); TMEP §1207.01(a)(i).
The respective goods need only be “related in some manner and/or if the circumstances surrounding their marketing [be] such that they could give rise to the mistaken belief that [the goods] emanate from the same source.” Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).
Because applicant’s and registrant’s marks are confusingly similar and their goods are closely related, applicant’s mark must be refused due to a likelihood of confusion.
(1) Deleting the goods to which the refusal pertains;
(2) Filing a Request to Divide Application form (form #3) to divide out the goods that have not been refused registration, so that the mark may proceed toward publication for opposition for those goods or services to which the refusal does not pertain. See 37 C.F.R. §2.87. See generally TMEP §§1110 et seq. (regarding the requirements for filing a request to divide). If applicant files a request to divide, then to avoid abandonment, applicant must also file a timely response to all outstanding issues in this Office action, including the refusal. 37 C.F.R. §2.87(e).; or
(3) Amending the basis for the goods and/or services identified in the refusal, if appropriate. TMEP §806.03(h). (The basis cannot be changed for applications filed under Trademark Act Section 66(a). TMEP §1904.01(a).)
The wording “machines using cameras and illumination systems” in the identification of goods is indefinite and must be clarified because it is not entirely clear which is the predominant element, the machinery, the cameras, or the illumination systems. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01. Applicant must amend this wording to specify the common commercial or generic name of the goods. See TMEP §1402.01. If the goods have no common commercial or generic name, applicant must describe the product, its main purpose, and its intended uses. See id.
Applicant may adopt the following identification, if accurate:
Class 7: Devices in the nature of {applicant must specify the devices, e.g., ignition devices, cutting devices being parts of machines} and machines for contamination control in semiconductor device manufacturing; Devices in the nature of {applicant must specify the devices, e.g., ignition devices, cutting devices being parts of machines} and machines for cleaning wafer carriers; Devices in the nature of {applicant must specify the devices, e.g., ignition devices, cutting devices being parts of machines} and machines for cleaning reticle carriers; Devices in the nature of {applicant must specify the devices, e.g., ignition devices, cutting devices being parts of machines} and machines for inspecting wafer carriers; Devices in the nature of {applicant must specify the devices, e.g., ignition devices, cutting devices being parts of machines} and machines for inspecting reticle carriers; Devices in the nature of {applicant must specify the devices, e.g., ignition devices, cutting devices being parts of machines} and semiconductor wafer processing equipment, namely, machines using cameras and illumination systems to detect defects and/or contamination in wafer carriers; Devices in the nature of {applicant must specify the devices, e.g., ignition devices, cutting devices being parts of machines} and semiconductor reticle processing equipment, namely, machines using cameras and illumination systems to detect defects and/or contamination in reticle carriers; Device and machines for semiconductor device manufacturing.
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
Responding to this Action
The USPTO does not accept emails as responses to Office actions; however, emails can be used for informal communications and are included in the application record. See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05.
How to respond. Click to file a response to this nonfinal Office action.
/Leslee A. Friedman/
Leslee A. Friedman
Trademark Examining Attorney
Office 120
leslee.friedman@uspto.gov
(571) 272 - 5278
RESPONSE GUIDANCE