Trademark/Service Mark Application, Principal Register
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1478 (Rev 09/2006)
OMB No. 0651-0009 (Exp 02/28/2021)
Trademark/Service Mark Application, Principal Register
The mark consists of standard characters, without claim to any particular font style, size, or color.
REGISTER
Principal
APPLICANT INFORMATION
*OWNER OF MARK
Preformed Line Products Company
*MAILING ADDRESS
660 Beta Drive
*CITY
Mayfield Village
*STATE
(Required for U.S. applicants)
Ohio
*COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
*ZIP/POSTAL CODE
(Required for U.S. and certain international addresses)
44143
PHONE
216-622-8200
FAX
216.241.0816
*EMAIL ADDRESS
XXXX
LEGAL ENTITY INFORMATION
TYPE
corporation
STATE/COUNTRY/REGION/JURISDICTION/U.S. TERRITORY OF INCORPORATION
Ohio
GOODS AND/OR SERVICES AND BASIS INFORMATION
INTERNATIONAL CLASS
006
*IDENTIFICATION
Metal hardware, namely, L-connectors, T-connectors, manhole support brackets; metal mounts and hardware for securing photovoltaic solar
panels, namely, ballasted flat roof and terrain mount systems consisting of mounted bases, module clips and wind deflectors; metal fencing products, namely, dead-end braces, H-braces, connectors,
anchors, splices, non-luminous and non-mechanical metal post signs, and safety dispensers for fencing wires
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
008
*IDENTIFICATION
Torque wrenches; hand tools, namely, ratchet wrenches; hand-operated cutting tools, namely, hand tools for cutting apertures in splice case
end plates; hand tools, namely, tool for removing splice case end plates; hand tools, namely, hand tools for shaping cable during splice case and closure installation; hand tools, namely, stretchers
and fence clip tie bars for fencing wire
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
009
*IDENTIFICATION
Safety markers for telephone cable pedestals and telephone highway posts; wire brushes specially adapted for the preparation and cleaning of
low and high voltage electrical conductors; optical communications instruments, namely, receivers, transmitters, and modems; optical cables; fiber optic cable hardware specially adapted for use with
fiber optic cables, namely, connectors, cleavers, and clamps; motion suppression or damping apparatus for power transmission cables, power distribution cables and communication cables, namely, air
flow spoilers and vibration dampers; accessories specially adapted for electrical ropes, cables, strands, wires, and pole lines, namely, armor rods, line guards, patch rods, tap armor, dead ends,
telephone splints, splint and tie assemblies, lashing rods, conductor suspension systems, electrical splice shunts, spacers for parallel conductors, tangent supports, and drop wire hangers; metal
components specially adapted for securing, supporting, and protecting power transmission lines, power distribution lines, and telecommunication lines, namely, suspension clamps, yoke plates clevises,
socket eyes, bundling links and hold down weight shackles, lashing rods, lashing rod wires, lashing rod terminations, armor rods, air flow spoilers and vibration dampers, ties for attaching lines and
cables, spacers and spacer dampers for parallel lines and cables, dead ends terminations and pulling eyes, ground wire moldings, markers, guards, wrap links and dispensers for guy wires, cable
separators and support blocks, taps, splints, cross tie connectors, and drop wire hangers; safety equipment for electric power lines, namely, hot sticks poles for use on electric power lines;
apparatus for splicing optical fibers, namely, fusion splicers; optical fibers, namely, pigtails; non-electric telecommunication cable splice blocks; non-electric telecommunication cable interface
plugs; metal components specially adapted for non-electric coaxial cables, namely, grips, taps, dead ends, and ground wire moldings; metal components specially adapted for non-electric
telecommunication cables, namely, closures, shield connectors, spring clamps, pair protectors, and bonding kits comprised of bonding braid and clamps; metal components specially adapted for
non-electric telephone cables, namely, shield connectors and fasteners for making bonding and grounding connections in splice closures and pedestal terminals; metal components specially adapted for
telephone, coaxial, voice, video and data transmission cables, namely, gaskets and torque bars; wall mount splice closures specially adapted for fiber optic, telephone, and coaxial cables, namely,
bulkhead panels; fiber optic cable connectors, namely, external isolation terminal kits for fiber optic cables consisting primarily of fiber optic cable connectors and also including isolation
terminals, cable studs, splice sleeves, and a quick disconnects; splices for electrical transmission lines; wire connector kits containing items specially adapted for bonding and connecting
electrical wires, namely, bonding braid, bonding clips and shield connectors; splice closures specially adapted for telephone, coaxial, voice, video, and data transmission cables; rack and wall mount
splice closures specially adapted for fiber optic, telephone, coaxial, voice, video, and data transmission cables; splice and cross-connect closure components specially adapted for fiber optic,
telephone, coaxial, voice, video, and data transmission cables, namely, splice case housings, end plates, end plate grommets, buffer trays, splice trays, grounding studs, vertical mount brackets,
aerial hanger brackets, adapter brackets, heat shields; isolated ground kits specially adapted for fiber optic cable closures comprising nonconductive sleeves and rubber washers for establishing a
grounding connection between fiber optic cable and the exterior of a fiber optic closure or for isolating grounding connections internally of the closure; fiber optic cable closures, namely,
transport tubes specially adapted for fiber optic cables; fiber optic cable closure components specially adapted for use with fiber optic cables, namely, splices, couplers, splitters, patch panels
and cross connects; brackets specially adapted for fiber optic cable, namely, strength member brackets; fiber optic cable closure components, namely, ground insets placed within a fiber optic cable
closure specially adapted for grounding fiber optic cable to the exterior of the closures; fiber optic cable housing, namely, transition compartments and buffer tube storage compartments specially
adapted for use in housing fiber optic splice cases; fiber optic cable housing, namely, transition tubes and transport tubes specially adapted for use in housing fiber optic splice cases; fiber optic
cable installation kits consisting primarily of fiber optic connectors and also including L-brackets, brackets, end plates, bobbins, gaskets, grommets, clips, and dome closures for the storage of
spliced and unspliced fiber optic cable, sold together as a unit; fiber optic cable connector kits consisting primarily of fiber optic connector housing and also including L-brackets, brackets, end
plates bobbins, gaskets, grommets, clips and dome closures for the storage of spliced and unspliced fiber optic cable, sold together as a unit; aerial cable hardware for power utility lines that
carry line inspection equipment, namely, formed wire track that allows the line inspection equipment to pass over suspensions, connecting hardware and dampers without leaving the line; high voltage
electric substation hardware, namely rigid busbar tubes, bolted and welded tube connectors, bolted, welded and compression interplant conductor connectors, flexible conductor tension and suspension
stringsets, earthing systems, insulators and switchgear; protective work gloves for use with fencing wire; metal and non-metal electric signs for fences
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
017
*IDENTIFICATION
Polymer insulators for overhead electrical power transmission and distribution lines; insulating sleeves for electrical fencing wire, namely,
insulating sleeves for dead-end braces; insulating sleeves for electrical fencing wire, namely, tree guards to insulate the electrical fencing wire from trees
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
019
*IDENTIFICATION
Non-metal fencing products, namely, non-luminous and non-mechanical signs
FILING BASIS
SECTION 1(b)
ATTORNEY INFORMATION
NAME
Raymond Rundelli
ATTORNEY DOCKET NUMBER
31042.04576
ATTORNEY BAR MEMBERSHIP NUMBER
XXX
YEAR OF ADMISSION
XXXX
U.S. STATE/ COMMONWEALTH/ TERRITORY
XX
FIRM NAME
Calfee, Halter & Griswold LLP
INTERNAL ADDRESS
The Calfee Building
STREET
1405 East Sixth Street
CITY
Cleveland
STATE
Ohio
COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
ZIP/POSTAL CODE
44114-1607
PHONE
216-622-8200
FAX
216.241.0816
EMAIL ADDRESS
ipdocket@calfee.com
OTHER APPOINTED ATTORNEY
Andrew W. Alexander, Chet J. Bonner, Daniel W. Bowen, Michael C. Campbell, John S. Cipolla, Kyle T. Deighan, Ryan W. Falk, Joshua A.
Friedman, Ivan Gracic, David J. Grover, Mark R. Hull, Christopher M. Jackson, Tara A. Kastelic, Dustin D. Likens, Brad Liu, J. Andrew Mason, Mark W. McDougall, Daniel J. McMullen, John E. Miller,
David V. Monateri, Stephen W. Moore, Sean T. Moorhead, Nenad Pejic, Kimberly A. Pinter, Bradley S. Pulfer, Billy C. Raulerson, John L. Reulbach, Raymond Rundelli, Joshua M. Ryland, Adam P. Slepecky,
Kenneth A. Smith, Kenneth J. Smith, Jackson R. Smith, Todd R. Tucker, Veronica L. Vasu, Mark A. Watson, John A. Wilaj, Tianyue Zhang
CORRESPONDENCE INFORMATION
NAME
Raymond Rundelli
PRIMARY EMAIL ADDRESS FOR CORRESPONDENCE
ipdocket@calfee.com
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES)
NOT PROVIDED
FEE INFORMATION
APPLICATION FILING OPTION
TEAS Standard
NUMBER OF CLASSES
5
APPLICATION FOR REGISTRATION PER CLASS
275
*TOTAL FEES DUE
1375
*TOTAL FEES PAID
1375
SIGNATURE INFORMATION
SIGNATURE
/Raymond Rundelli/
SIGNATORY'S NAME
Raymond Rundelli
SIGNATORY'S POSITION
Attorney of Record, Member of Ohio Bar
SIGNATORY'S PHONE NUMBER
216-622-8200
DATE SIGNED
08/20/2020
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1478 (Rev 09/2006)
OMB No. 0651-0009 (Exp 02/28/2021)
Trademark/Service Mark Application, Principal Register
Serial Number:90127194
Filing Date:08/20/2020
To the Commissioner for Trademarks:
MARK: THE POWER OF EXPERIENCE (Standard Characters, see mark)
The literal element of the mark consists of THE POWER OF EXPERIENCE. The mark consists of standard characters, without claim to any particular font style, size, or color.
The applicant, Preformed Line Products Company, a corporation of Ohio, having an address of
660 Beta Drive
Mayfield Village, Ohio 44143
United States
216-622-8200(phone)
216.241.0816(fax)
XXXX
requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C.
Section 1051 et seq.), as amended, for the following:
International Class 006: Metal hardware, namely, L-connectors, T-connectors, manhole support brackets; metal mounts and hardware for securing photovoltaic solar panels, namely, ballasted flat
roof and terrain mount systems consisting of mounted bases, module clips and wind deflectors; metal fencing products, namely, dead-end braces, H-braces, connectors, anchors, splices, non-luminous and
non-mechanical metal post signs, and safety dispensers for fencing wires
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 008: Torque wrenches; hand tools, namely, ratchet wrenches; hand-operated cutting tools, namely, hand tools for cutting apertures in splice case end plates; hand tools,
namely, tool for removing splice case end plates; hand tools, namely, hand tools for shaping cable during splice case and closure installation; hand tools, namely, stretchers and fence clip tie bars
for fencing wire
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 009: Safety markers for telephone cable pedestals and telephone highway posts; wire brushes specially adapted for the preparation and cleaning of low and high voltage
electrical conductors; optical communications instruments, namely, receivers, transmitters, and modems; optical cables; fiber optic cable hardware specially adapted for use with fiber optic cables,
namely, connectors, cleavers, and clamps; motion suppression or damping apparatus for power transmission cables, power distribution cables and communication cables, namely, air flow spoilers and
vibration dampers; accessories specially adapted for electrical ropes, cables, strands, wires, and pole lines, namely, armor rods, line guards, patch rods, tap armor, dead ends, telephone splints,
splint and tie assemblies, lashing rods, conductor suspension systems, electrical splice shunts, spacers for parallel conductors, tangent supports, and drop wire hangers; metal components specially
adapted for securing, supporting, and protecting power transmission lines, power distribution lines, and telecommunication lines, namely, suspension clamps, yoke plates clevises, socket eyes,
bundling links and hold down weight shackles, lashing rods, lashing rod wires, lashing rod terminations, armor rods, air flow spoilers and vibration dampers, ties for attaching lines and cables,
spacers and spacer dampers for parallel lines and cables, dead ends terminations and pulling eyes, ground wire moldings, markers, guards, wrap links and dispensers for guy wires, cable separators and
support blocks, taps, splints, cross tie connectors, and drop wire hangers; safety equipment for electric power lines, namely, hot sticks poles for use on electric power lines; apparatus for splicing
optical fibers, namely, fusion splicers; optical fibers, namely, pigtails; non-electric telecommunication cable splice blocks; non-electric telecommunication cable interface plugs; metal components
specially adapted for non-electric coaxial cables, namely, grips, taps, dead ends, and ground wire moldings; metal components specially adapted for non-electric telecommunication cables, namely,
closures, shield connectors, spring clamps, pair protectors, and bonding kits comprised of bonding braid and clamps; metal components specially adapted for non-electric telephone cables, namely,
shield connectors and fasteners for making bonding and grounding connections in splice closures and pedestal terminals; metal components specially adapted for telephone, coaxial, voice, video and
data transmission cables, namely, gaskets and torque bars; wall mount splice closures specially adapted for fiber optic, telephone, and coaxial cables, namely, bulkhead panels; fiber optic cable
connectors, namely, external isolation terminal kits for fiber optic cables consisting primarily of fiber optic cable connectors and also including isolation terminals, cable studs, splice sleeves,
and a quick disconnects; splices for electrical transmission lines; wire connector kits containing items specially adapted for bonding and connecting electrical wires, namely, bonding braid, bonding
clips and shield connectors; splice closures specially adapted for telephone, coaxial, voice, video, and data transmission cables; rack and wall mount splice closures specially adapted for fiber
optic, telephone, coaxial, voice, video, and data transmission cables; splice and cross-connect closure components specially adapted for fiber optic, telephone, coaxial, voice, video, and data
transmission cables, namely, splice case housings, end plates, end plate grommets, buffer trays, splice trays, grounding studs, vertical mount brackets, aerial hanger brackets, adapter brackets, heat
shields; isolated ground kits specially adapted for fiber optic cable closures comprising nonconductive sleeves and rubber washers for establishing a grounding connection between fiber optic cable
and the exterior of a fiber optic closure or for isolating grounding connections internally of the closure; fiber optic cable closures, namely, transport tubes specially adapted for fiber optic
cables; fiber optic cable closure components specially adapted for use with fiber optic cables, namely, splices, couplers, splitters, patch panels and cross connects; brackets specially adapted for
fiber optic cable, namely, strength member brackets; fiber optic cable closure components, namely, ground insets placed within a fiber optic cable closure specially adapted for grounding fiber optic
cable to the exterior of the closures; fiber optic cable housing, namely, transition compartments and buffer tube storage compartments specially adapted for use in housing fiber optic splice cases;
fiber optic cable housing, namely, transition tubes and transport tubes specially adapted for use in housing fiber optic splice cases; fiber optic cable installation kits consisting primarily of
fiber optic connectors and also including L-brackets, brackets, end plates, bobbins, gaskets, grommets, clips, and dome closures for the storage of spliced and unspliced fiber optic cable, sold
together as a unit; fiber optic cable connector kits consisting primarily of fiber optic connector housing and also including L-brackets, brackets, end plates bobbins, gaskets, grommets, clips and
dome closures for the storage of spliced and unspliced fiber optic cable, sold together as a unit; aerial cable hardware for power utility lines that carry line inspection equipment, namely, formed
wire track that allows the line inspection equipment to pass over suspensions, connecting hardware and dampers without leaving the line; high voltage electric substation hardware, namely rigid busbar
tubes, bolted and welded tube connectors, bolted, welded and compression interplant conductor connectors, flexible conductor tension and suspension stringsets, earthing systems, insulators and
switchgear; protective work gloves for use with fencing wire; metal and non-metal electric signs for fences
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 017: Polymer insulators for overhead electrical power transmission and distribution lines; insulating sleeves for electrical fencing wire, namely, insulating sleeves for
dead-end braces; insulating sleeves for electrical fencing wire, namely, tree guards to insulate the electrical fencing wire from trees
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 019: Non-metal fencing products, namely, non-luminous and non-mechanical signs
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
The owner's/holder's proposed attorney information: Raymond Rundelli. Other appointed attorneys are Andrew W. Alexander, Chet J. Bonner, Daniel W. Bowen, Michael C. Campbell, John S. Cipolla, Kyle T.
Deighan, Ryan W. Falk, Joshua A. Friedman, Ivan Gracic, David J. Grover, Mark R. Hull, Christopher M. Jackson, Tara A. Kastelic, Dustin D. Likens, Brad Liu, J. Andrew Mason, Mark W. McDougall, Daniel
J. McMullen, John E. Miller, David V. Monateri, Stephen W. Moore, Sean T. Moorhead, Nenad Pejic, Kimberly A. Pinter, Bradley S. Pulfer, Billy C. Raulerson, John L. Reulbach, Raymond Rundelli, Joshua
M. Ryland, Adam P. Slepecky, Kenneth A. Smith, Kenneth J. Smith, Jackson R. Smith, Todd R. Tucker, Veronica L. Vasu, Mark A. Watson, John A. Wilaj, Tianyue Zhang. Raymond Rundelli of Calfee,
Halter & Griswold LLP, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at
The Calfee Building
1405 East Sixth Street
Cleveland, Ohio 44114-1607
United States
216-622-8200(phone)
216.241.0816(fax)
ipdocket@calfee.com
The docket/reference number is 31042.04576.
Raymond Rundelli submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S.
Commonwealth or territory.
The applicant's current Correspondence Information:
Raymond Rundelli
PRIMARY EMAIL FOR CORRESPONDENCE: ipdocket@calfee.com SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED
Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed,
and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).
A fee payment in the amount of $1375 has been submitted with the application, representing payment for 5 class(es).
Declaration
Declaration Signature
Signature: /Raymond Rundelli/ Date: 08/20/2020
Signatory's Name: Raymond Rundelli
Signatory's Position: Attorney of Record, Member of Ohio Bar
Payment Sale Number: 90127194
Payment Accounting Date: 08/20/2020
Serial Number: 90127194
Internet Transmission Date: Thu Aug 20 15:38:42 ET 2020
TEAS Stamp: USPTO/BAS-XXX.XXX.XXX.XX-202008201538424
31996-90127194-740554f56fafa8c83d4e6395d
9fd847fc5121e2b3b7e54c5ca9e603a769efc523
c-CC-38417074-20200820150338302046