To: | FerRobotics Compliant Robot Technology G ETC. (tm-group@wg-law.com) |
Subject: | U.S. Trademark Application Serial No. 90056484 - AOK - 5246-010 |
Sent: | November 03, 2020 07:46:29 PM |
Sent As: | ecom119@uspto.gov |
Attachments: | Attachment - 1 Attachment - 2 Attachment - 3 Attachment - 4 Attachment - 5 Attachment - 6 Attachment - 7 Attachment - 8 Attachment - 9 Attachment - 10 Attachment - 11 Attachment - 12 Attachment - 13 Attachment - 14 Attachment - 15 Attachment - 16 Attachment - 17 Attachment - 18 Attachment - 19 Attachment - 20 Attachment - 21 Attachment - 22 Attachment - 23 Attachment - 24 Attachment - 25 Attachment - 26 Attachment - 27 Attachment - 28 Attachment - 29 Attachment - 30 Attachment - 31 Attachment - 32 Attachment - 33 Attachment - 34 Attachment - 35 Attachment - 36 Attachment - 37 Attachment - 38 Attachment - 39 Attachment - 40 Attachment - 41 Attachment - 42 Attachment - 43 Attachment - 44 Attachment - 45 |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 90056484
Mark: AOK
|
|
Correspondence Address:
|
|
Applicant: FerRobotics Compliant Robot Technology G ETC.
|
|
Reference/Docket No. 5246-010
Correspondence Email Address: |
|
NONFINAL OFFICE ACTION
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: November 03, 2020
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION
Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis: (1) the similarities between the compared marks and (2) the relatedness of the compared goods and/or services. See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.
Applicant’s mark is “AOK” for “Cutting, drilling, grinding, sharpening and surface treatment machines and apparatus, in particular grinding machines, polishing machines and grinding and polishing machines for robot-assisted grinding or polishing”.
The registered marks are:
Reg. No. 4932109 “AOK” in stylized lettering for among other things, “Belts for machines; Electric knives; Industrial robots; Lathes; Machine parts, namely, wear plates and strips; Machine wheelworks; Shaping machines for metalworking”
Reg. No. 5708851 “AOK LASER” and design for among other things, “Cutting machines; Engraving machines; Laser welding machines; Carbon dioxide laser tubes being parts of machines; Fiber cutting machines; Laser engraving machines; Laser engraving machines for woodworking; Laser machines for cutting, marking, and engraving fabric designed for installation directly above embroidery machines; Photo-engraving machines; Plastic processing machines”
Comparison of the Marks
Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression. Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v). “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.” In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)), aff’d per curiam, 777 F. App’x 516, 2019 BL 343921 (Fed. Cir. 2019); TMEP §1207.01(b).
Applying the above analysis, applicant’s mark is legally identical to the mark in Reg. No. 4932109 and substantially similar to the mark in Reg. No. 5708851.
Applicant’s mark is in standard characters and thus must be considered legally identical to the mark in Reg. No. 4932109. A mark in typed or standard characters may be displayed in any lettering style; the rights reside in the wording or other literal element and not in any particular display or rendition. See In re Viterra Inc., 671 F.3d 1358, 1363, 101 USPQ2d 1905, 1909 (Fed. Cir. 2012); In re Mighty Leaf Tea, 601 F.3d 1342, 1348, 94 USPQ2d 1257, 1260 (Fed. Cir. 2010); 37 C.F.R. §2.52(a); TMEP §1207.01(c)(iii). Thus, a mark presented in stylized characters and/or with a design element generally will not avoid likelihood of confusion with a mark in typed or standard characters because the word portion could be presented in the same manner of display. See, e.g., In re Viterra Inc., 671 F.3d at 1363, 101 USPQ2d at 1909; Squirtco v. Tomy Corp., 697 F.2d 1038, 1041, 216 USPQ 937, 939 (Fed. Cir. 1983) (stating that “the argument concerning a difference in type style is not viable where one party asserts rights in no particular display”).
The recognizable and dominant portion of the mark in Reg. No. 5708851 is the word “AOK” which is identical or virtually identical to the recognizable and dominant portion of the registered mark. In the instant case, it is appropriate to give more weight to the “AOK” portion of the mark because of the generic nature of the wording “LASER” when used in connection with lasers. Although marks are compared in their entireties, one feature of a mark may be more significant or dominant in creating a commercial impression. See In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Nat’l Data Corp., 753 F.2d 1056, 1058, 224 USPQ 749, 751 (Fed. Cir. 1985); TMEP §1207.01(b)(viii), (c)(ii). Disclaimed matter that is descriptive of or generic for a party’s goods and/or services is typically less significant or less dominant when comparing marks. In re Detroit Athletic Co., 903 F.3d 1297, 1305, 128 USPQ2d 1047, 1050 (Fed. Cir. 2018) (citing In re Dixie Rests., Inc., 105 F.3d 1405, 1407, 41 USPQ2d 1531, 1533-34 (Fed. Cir. 1997)); TMEP §1207.01(b)(viii), (c)(ii).
As such, viewed as a whole, applicant's mark is identical in sound and legally identical in appearance, connotation and commercial impression to the mark in Reg. No. 4932109 and substantially similar in sound, appearance, connotation and commercial impression to the mark in Reg. No. 5708851.
Where the marks of the respective parties are identical or virtually identical, as in this case, the degree of similarity or relatedness between the goods and/or services needed to support a finding of likelihood of confusion declines. See In re Country Oven, Inc., 2019 USPQ2d 443903, at *5 (TTAB 2019) (citing In re i.am.symbolic, llc, 116 USPQ2d 1406, 1411 (TTAB 2015), aff’d, 866 F.3d 1315, 123 USPQ2d 1744 (Fed. Cir. 2017)); TMEP §1207.01(a); see also In re Shell Oil Co., 992 F.2d 1204, 1207, 26 USPQ2d 1687, 1689 (Fed. Cir. 1993).
Comparison of the Goods
In this case, the goods are in part legally identical and otherwise closely related types of machines. Determining likelihood of confusion is based on the description of the goods and/or services stated in the application and registration at issue, not on extrinsic evidence of actual use. See In re Detroit Athletic Co., 903 F.3d 1297, 1307, 128 USPQ2d 1047, 1052 (Fed. Cir. 2018) (citing In re i.am.symbolic, llc, 866 F.3d 1315, 1325, 123 USPQ2d 1744, 1749 (Fed. Cir. 2017)).
In this case, Reg. No. 4932109 use(s) broad wording to describe industrial robots and shaping machines for metalworking, and Reg. No. 5708851 uses broad wording to describe cutting machines and engraving machines, which presumably encompasses all goods of the type described, including applicant’s more narrow cutting, drilling, grinding, sharpening and surface treatment machines and apparatus, in particular grinding machines, polishing machines and grinding and polishing machines for robot-assisted grinding or polishing. In addition, the attached evidence from applicant’s website at http://www.ferrobotics.com/en/ indicates that applicant makes robotic devices for surface treatment of various materials. See, e.g., In re Solid State Design Inc., 125 USPQ2d 1409, 1412-15 (TTAB 2018); Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015). Thus, applicant’s and registrant’s goods are legally identical. See, e.g., In re i.am.symbolic, llc, 127 USPQ2d 1627, 1629 (TTAB 2018) (citing Tuxedo Monopoly, Inc. v. Gen. Mills Fun Grp., Inc., 648 F.2d 1335, 1336, 209 USPQ 986, 988 (C.C.P.A. 1981); Inter IKEA Sys. B.V. v. Akea, LLC, 110 USPQ2d 1734, 1745 (TTAB 2014); Baseball Am. Inc. v. Powerplay Sports Ltd., 71 USPQ2d 1844, 1847 n.9 (TTAB 2004)).
Additionally, the goods and/or services of the parties have no restrictions as to nature, type, channels of trade, or classes of purchasers and are “presumed to travel in the same channels of trade to the same class of purchasers.” In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)). Thus, applicant’s and registrant’s goods and/or services are legally identical.
Where the goods and/or services of an applicant and registrant are identical or virtually identical, the degree of similarity between the marks required to support a finding that confusion is likely declines. See Cai v. Diamond Hong, Inc., 901 F.3d 1367, 1373, 127 USPQ2d 1797, 1801 (Fed. Cir. 2018) (quoting In re Viterra Inc., 671 F.3d 1358, 1363, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012)); TMEP §1207.01(b).
The compared goods and/or services need not be identical or even competitive to find a likelihood of confusion. See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000); TMEP §1207.01(a)(i). They need only be “related in some manner and/or if the circumstances surrounding their marketing are such that they could give rise to the mistaken belief that [the goods and/or services] emanate from the same source.” Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).
Thus since the marks are substantially similar and the goods are in part legally identical and otherwise closely related types of machines, there is a likelihood of confusion and registration must be refused.
SIGNED DECLARATION REQUIRED
The following statements must be verified: That applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date; that applicant believes applicant is entitled to use the mark in commerce on or in connection with the goods or services specified in the application; that to the best of the signatory’s knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive; and that the facts set forth in the application are true. 37 C.F.R. §§2.33(b)(2), (c), 2.34(a)(2), (a)(3)(i), (a)(4)(ii).
For more information about the verified statement and instructions on providing one using the online Trademark Electronic Application System (TEAS) response form, see the Verified statement webpage.
CERTIFICATE OF FOREIGN REGISTRATION ADVISORY
An application with a Section 44(e) basis must include a true copy, photocopy, certification, or certified copy of a foreign registration from an applicant’s country of origin. 15 U.S.C. §1126(e); 37 C.F.R. §2.34(a)(3)(ii); TMEP §§1004, 1004.01, 1016. In addition, the applicant’s country of origin must be a party to a convention or treaty relating to trademarks to which the United States is also a party, or must extend reciprocal registration rights to nationals of the United States by law. 15 U.S.C. §1126(b); TMEP §§1002.01, 1004.
Therefore, applicant must provide a copy of the foreign registration from applicant’s country of origin when it becomes available. TMEP §1003.04(a). A copy of a foreign registration must consist of a document issued to an applicant by, or certified by, the intellectual property office in applicant’s country of origin. TMEP §1004.01. If applicant’s country of origin does not issue registrations or Madrid Protocol certificates of extension of protection, the applicant may submit a copy of the Madrid Protocol international registration that shows that protection of the international registration has been extended to applicant’s country of origin. TMEP §1016. In addition, applicant must also provide an English translation if the foreign registration is not written in English. 37 C.F.R. §2.34(a)(3)(ii); TMEP §1004.01(a)-(b). The translation should be signed by the translator. TMEP §1004.01(b).
If the foreign registration is not yet available, applicant should inform the trademark examining attorney that the foreign application is still pending and request that the U.S. application be suspended until a copy of the foreign registration is available. TMEP §§716.02(b), 1003.04(a).
If applicant cannot satisfy the requirements of the Section 44(e) basis, applicant may amend the basis to Section 1(a) or 1(b), if applicant can satisfy the requirements for the new basis. See 15 U.S.C. §§1051(a)-(b), 1126(e); TMEP §806.03. Please note that, if the U.S. application satisfied the requirements of Section 44(d) as of the U.S. application filing date, applicant may retain the priority filing date under Section 44(d) without perfecting the Section 44(e) basis, provided there is a continuing valid basis for registration. See 37 C.F.R. §2.35(b)(3)-(4); TMEP §§806.02(f), 806.03(h).
RESPONSE
The USPTO does not accept emails as responses to Office actions; however, emails can be used for informal communications and are included in the application record. See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05.
How to respond. Click to file a response to this nonfinal Office action.
/Blake Lovelace/
James Blake Lovelace
Examining Attorney
Law Office 119
(571) 270-1533
james.lovelace@uspto.gov
RESPONSE GUIDANCE