Application

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1478 (Rev 09/2006)

OMB No. 0651-0009 (Exp 02/28/2021)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1478 (Rev 09/2006)

OMB No. 0651-0009 (Exp 02/28/2021)

Trademark/Service Mark Application, Principal Register

Serial Number: 90026618

Filing Date: 06/29/020

To the Commissioner for Trademarks:

MARK: OBSERO (stylized and/or with design, see mark)
The literal element of the mark consists of OBSERO. The mark consists of a design with six sides containing intersecting triangles and circles at each point of the design and in the center with the word "OBSERO" to the right of the design.
The applicant, Southern Folger Detention Equipment Company, LLC, a limited liability company legally organized under the laws of Texas, having an address of
      4634 South Presa Street
      San Antonio, Texas 78223
      United States
      XXXX

requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C. Section 1051 et seq.), as amended, for the following:

International Class 009:  [USE BASED] Electronic locks embedded with software and magnets and hall effect sensors for use in prisons, jails, detention centers and other high security facilities; electromechanial high security locks and locking systems for use in prisons, jails, detention centers and other high security facilities; electromechanical high security locks and locking systems for use in prisons, jails, detention centers and other high security facilities, namely, electromechanical locks, electromechanical swing door locks, motor driven locks, motor operated electro mechanical deadlatches, and solenoid driven smart locks; electronic locks embedded with software and magnets and hall effect sensors; electronic locks; electric deadlatches; electric deadbolts; electric door locks; electric locks for prisons, jails, detention centers and other high security uses; electric controls and switches; electric gate openers and closers; electric gate locks

In International Class 009, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 04/01/2020, and first used in commerce at least as early as 04/01/2020, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) copies of a catalog and price list reflecting Applicant's use of its mark with the goods.

Original PDF file:
SPE0-156471510-20200611170102408003_._ObseroSpecimen1.pdf
Converted PDF file(s) (19 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5
Specimen File6
Specimen File7
Specimen File8
Specimen File9
Specimen File10
Specimen File11
Specimen File12
Specimen File13
Specimen File14
Specimen File15
Specimen File16
Specimen File17
Specimen File18
Specimen File19
Original PDF file:
SPE0-156471510-20200611170102408003_._ObseroSpecimen2.pdf
Converted PDF file(s) (5 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5

International Class 009:  [ITU BASED] Electromechanical high security locks and locking systems for use in prisons, jails, detention centers and other high security facilities, namely, electromechanical sliding door locks; electromechanical sliding door lock systems for use in prisons, jails, detention centers and other high security facilities comprised of electromechanical locks, latches, guides, door hangers, hardware, switches, control panels and electric motors; solenoid-operated locks, deadlatches and deadbolts; electric locks for sliding doors and swinging doors; electric door openers and closers; electric switches; indication switches with lights; magnetic switches; electric door position controls; electric door position indicators; electric hinges; electronic access control security systems comprising computer hardware and software for use in controlling access to facilities and areas by control of doors, gates and latches
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.




The owner's/holder's proposed attorney information: Jill J. Chalmers. Other appointed attorneys are Katherine A. Keating and all other attorneys of Bryan Cave Leighton Paisner LLP. Jill J. Chalmers of Bryan Cave Leighton Paisner LLP, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at
      90 South Cascade Avenue, Suite 1300
      Colorado Springs, Colorado 80903
      United States
      719-473-3800(phone)
      719-633-1518(fax)
      jill.chalmers@bclplaw.com
The docket/reference number is 3003836.31.
Jill J. Chalmers submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.

The applicant's current Correspondence Information:

Jill J. Chalmers

PRIMARY EMAIL FOR CORRESPONDENCE: jill.chalmers@bclplaw.com       SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed, and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).

A fee payment in the amount of $275 has been submitted with the application, representing payment for 1 class(es).

Declaration

	Basis: If the applicant is filing the application based on use in commerce under 15 U.S.C. § 1051(a): The signatory believes that the applicant is the owner of the trademark/service mark sought to be registered; The mark is in use in commerce and was in use in commerce as of the filing date of the application on or in connection with the goods/services in the application; The specimen(s) shows the mark as used on or in connection with the goods/services in the application and was used on or in connection with the goods/services in the application as of the application filing date; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate. And/Or If the applicant is filing the application based on an intent to use the mark in commerce under 15 U.S.C. § 1051(b), § 1126(d), and/or § 1126(e): The signatory believes that the applicant is entitled to use the mark in commerce; The applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate.
	To the best of the signatory's knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive.
	To the best of the signatory's knowledge, information, and belief, formed after an inquiry reasonable under the circumstances, the allegations and other factual contentions made above have evidentiary support.
	The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.

Declaration Signature

Signature: /Donald G Halloran/   Date: 06/29/2020
Signatory's Name: Donald G. Halloran
Signatory's Position: President
Payment Sale Number: 90026618
Payment Accounting Date: 06/29/2020

Serial Number: 90026618
Internet Transmission Date: Mon Jun 29 17:21:59 ET 2020
TEAS Stamp: USPTO/BAS-XXX.XX.XX.XX-20200629172159775
536-90026618-7106ec5627bef13dcba596c6736
0448363b9ab4eff2675dbb9bf5bb2382c06e-DA-
21599018-20200615175501056861