Trademark/Service Mark Application, Principal Register
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1478 (Rev 09/2006)
OMB No. 0651-0009 (Exp 02/28/2021)
Trademark/Service Mark Application, Principal Register
*DESCRIPTION OF THE MARK
(and Color Location, if applicable)
The mark consists of a design of a Triton.
PIXEL COUNT ACCEPTABLE
YES
PIXEL COUNT
571 x 382
REGISTER
Principal
APPLICANT INFORMATION
*OWNER OF MARK
Drew Marine USA, Inc.
*MAILING ADDRESS
100 South Jefferson Road
*CITY
Whippany
*STATE
(Required for U.S. applicants)
New Jersey
*COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
*ZIP/POSTAL CODE
(Required for U.S. and certain international addresses)
07981
*EMAIL ADDRESS
XXXX
LEGAL ENTITY INFORMATION
TYPE
corporation
STATE/COUNTRY/REGION/JURISDICTION/U.S. TERRITORY OF INCORPORATION
Delaware
GOODS AND/OR SERVICES AND BASIS INFORMATION
INTERNATIONAL CLASS
001
*IDENTIFICATION
Compressed gases and brazing fluxes for use in welding; chemical solutions for use as a corrosion inhibitor for fresh and/or sea water
delivery systems on marine vessels, off shore drilling rigs, shipyards and dredging equipment; petroleum based chemical preparations for retarding rust for use on sea water vessel ballast tanks;
chemical additives for treatment of fuel oil; water treatment chemicals for the treatment of cooling water systems using fresh or sea water in connection with marine vessels, off shore drilling rigs
shipyards and dredging equipment; chemical additives for the treatment of fuel in connection with marine vessels, off shore drilling rigs and dredging equipment; chemicals for the repair and
maintenance of fresh or sea water utility cooling systems on marine vessels, off shore drilling rigs and dredging equipment; chemicals and gases for welding in connection with marine vessels, off
shore drilling rigs, shipyards and dredging equipment; chemical sealants and coatings used as flame retardant agents on fresh and sea water marine vessels, off shore drilling rigs, shipyards and
dredging equipment; refrigeration chemicals; engine coolants for use with fresh and sea water marine vessels and off shore drilling rigs; waste water treatment chemicals for use on fresh and sea
water marine vessels, off shore drilling rigs, shipyards and dredging equipment; chemical additives for the treatment of fuel for use with fresh or sea water marine vessels, off shore drilling rigs,
shipyards and dredging equipment; fuel treatment chemicals for use with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; chemical sealants which penetrate
through walls, floors and ceilings for fire prevention in fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
002
*IDENTIFICATION
Coatings in the nature of industrial sealants for use in water proofing and surface hardening in connection with fresh or sea water marine
vessels, off shore drilling rigs, shipyards and dredging equipment.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
003
*IDENTIFICATION
Degreasing preparations for marine use and not used in manufacturing processes.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
006
*IDENTIFICATION
Rods of metal for brazing; metal welding rods and welding wire for use in connection with marine vessels, off shore drilling rigs, shipyards
and dredging equipment.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
007
*IDENTIFICATION
Electric welding machines, electric wet grinder for welding electrodes, gas welding guns and machines and laser welding machines, all for use
on fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment, and replacement parts therefor; oil separators for containing oil leaks on fresh or sea water marine
vessels, off shore drilling rigs, and shipyards and replacement parts therefor; dredging machines and mud dredging machines.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
009
*IDENTIFICATION
Pressure regulators for stepping down pressure in the oxyacetylene welding and joining process; electronic instruments for use in connection
with the measurement, testing and analysis of fuel and lube oil characteristics, namely, contaminant levels, density, viscosity, blending ratio, ignition quality, fuel stability and compatibility,
water content, calorific value, and base number of lube oil; laser welding devices, welding electrodes, welding masks, welding helmets, welding torches and welding transformers, all designed for use
on fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment, and replacement parts thereof; welding torch handle.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
013
*IDENTIFICATION
Spark igniters for welding torches.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
017
*IDENTIFICATION
Graphite packing for valves, pumps and gaskets; adhesive tape for industrial and commercial use; moldable compounds for use in jointing and
packing designed for use with fresh and sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; joint packing for refrigerant pipes found on sea water borne vessels, off
shore drilling rigs, shipyards and dredging equipment; packing materials for forming seals for use on fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging
equipment.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
035
*IDENTIFICATION
Distributorship services in the field of chemicals and gases for use in welding and refrigeration for use on ships.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
037
*IDENTIFICATION
Repair and maintenance services for others of fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment;
repair and maintenance for others of water treatment and fuel treatment equipment used in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment;
repair and maintenance for others of welding equipment designed for use in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; repair and
maintenance for others of fire and safety equipment use in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment.
FILING BASIS
SECTION 1(b)
INTERNATIONAL CLASS
040
*IDENTIFICATION
Rental of water treatment and fuel treatment equipment for use on fresh or sea water marine vessels, off shore drilling rigs, shipyards and
dredging equipment; sustainable on-site water recycling and wastewater treatment services for use on fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment;
waste water treatment and purification services for others in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; fuel treatment services for
dredging companies and others in connection with the operation of fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; welding services for dredging companies
and others in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment.
FILING BASIS
SECTION 1(b)
ADDITIONAL STATEMENTS SECTION
ACTIVE PRIOR REGISTRATION(S)
The applicant claims ownership of active prior U.S. Registration Number(s) 1020870, 1020850, 1023652, and others.
ATTORNEY INFORMATION
NAME
John L. Cordani
ATTORNEY BAR MEMBERSHIP NUMBER
XXX
YEAR OF ADMISSION
XXXX
U.S. STATE/ COMMONWEALTH/ TERRITORY
XX
FIRM NAME
Robinson & Cole LLP
STREET
280 Trumbull Street
CITY
Hartford
STATE
Connecticut
COUNTRY/REGION/JURISDICTION/U.S. TERRITORY
United States
ZIP/POSTAL CODE
06103
PHONE
860-275-8287
FAX
860-275-8299
EMAIL ADDRESS
jcordani@rc.com
OTHER APPOINTED ATTORNEY
each of its attorneys
CORRESPONDENCE INFORMATION
NAME
John L. Cordani
PRIMARY EMAIL ADDRESS FOR CORRESPONDENCE
jcordani@rc.com
SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES)
NOT PROVIDED
FEE INFORMATION
APPLICATION FILING OPTION
TEAS Standard
NUMBER OF CLASSES
11
APPLICATION FOR REGISTRATION PER CLASS
275
*TOTAL FEES DUE
3025
*TOTAL FEES PAID
3025
SIGNATURE INFORMATION
SIGNATURE
/John L. Cordani/
SIGNATORY'S NAME
John L. Cordani
SIGNATORY'S POSITION
Attorney of Record, CT bar member
SIGNATORY'S PHONE NUMBER
860-275-8287
DATE SIGNED
05/13/2020
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1478 (Rev 09/2006)
OMB No. 0651-0009 (Exp 02/28/2021)
Trademark/Service Mark Application, Principal Register
Serial Number:88913428
Filing Date:05/13/020
To the Commissioner for Trademarks:
MARK: (Stylized and/or Design, see mark) The applicant is not claiming color as a feature of the mark. The mark consists of a design of
a Triton.
The applicant, Drew Marine USA, Inc., a corporation of Delaware, having an address of
100 South Jefferson Road
Whippany, New Jersey 07981
United States
XXXX
requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C.
Section 1051 et seq.), as amended, for the following:
International Class 001: Compressed gases and brazing fluxes for use in welding; chemical solutions for use as a corrosion inhibitor for fresh and/or sea water delivery systems on marine
vessels, off shore drilling rigs, shipyards and dredging equipment; petroleum based chemical preparations for retarding rust for use on sea water vessel ballast tanks; chemical additives for
treatment of fuel oil; water treatment chemicals for the treatment of cooling water systems using fresh or sea water in connection with marine vessels, off shore drilling rigs shipyards and dredging
equipment; chemical additives for the treatment of fuel in connection with marine vessels, off shore drilling rigs and dredging equipment; chemicals for the repair and maintenance of fresh or sea
water utility cooling systems on marine vessels, off shore drilling rigs and dredging equipment; chemicals and gases for welding in connection with marine vessels, off shore drilling rigs, shipyards
and dredging equipment; chemical sealants and coatings used as flame retardant agents on fresh and sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; refrigeration
chemicals; engine coolants for use with fresh and sea water marine vessels and off shore drilling rigs; waste water treatment chemicals for use on fresh and sea water marine vessels, off shore
drilling rigs, shipyards and dredging equipment; chemical additives for the treatment of fuel for use with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging
equipment; fuel treatment chemicals for use with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; chemical sealants which penetrate through walls, floors
and ceilings for fire prevention in fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 002: Coatings in the nature of industrial sealants for use in water proofing and surface hardening in connection with fresh or sea water marine vessels, off shore drilling
rigs, shipyards and dredging equipment.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 003: Degreasing preparations for marine use and not used in manufacturing processes.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 006: Rods of metal for brazing; metal welding rods and welding wire for use in connection with marine vessels, off shore drilling rigs, shipyards and dredging equipment.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 007: Electric welding machines, electric wet grinder for welding electrodes, gas welding guns and machines and laser welding machines, all for use on fresh or sea water
marine vessels, off shore drilling rigs, shipyards and dredging equipment, and replacement parts therefor; oil separators for containing oil leaks on fresh or sea water marine vessels, off shore
drilling rigs, and shipyards and replacement parts therefor; dredging machines and mud dredging machines.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 009: Pressure regulators for stepping down pressure in the oxyacetylene welding and joining process; electronic instruments for use in connection with the measurement,
testing and analysis of fuel and lube oil characteristics, namely, contaminant levels, density, viscosity, blending ratio, ignition quality, fuel stability and compatibility, water content, calorific
value, and base number of lube oil; laser welding devices, welding electrodes, welding masks, welding helmets, welding torches and welding transformers, all designed for use on fresh or sea water
marine vessels, off shore drilling rigs, shipyards and dredging equipment, and replacement parts thereof; welding torch handle.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 013: Spark igniters for welding torches.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 017: Graphite packing for valves, pumps and gaskets; adhesive tape for industrial and commercial use; moldable compounds for use in jointing and packing designed for use
with fresh and sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; joint packing for refrigerant pipes found on sea water borne vessels, off shore drilling rigs,
shipyards and dredging equipment; packing materials for forming seals for use on fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 035: Distributorship services in the field of chemicals and gases for use in welding and refrigeration for use on ships.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 037: Repair and maintenance services for others of fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; repair and maintenance for
others of water treatment and fuel treatment equipment used in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; repair and maintenance for
others of welding equipment designed for use in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; repair and maintenance for others of fire
and safety equipment use in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
International Class 040: Rental of water treatment and fuel treatment equipment for use on fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment;
sustainable on-site water recycling and wastewater treatment services for use on fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; waste water treatment
and purification services for others in connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; fuel treatment services for dredging companies
and others in connection with the operation of fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment; welding services for dredging companies and others in
connection with fresh or sea water marine vessels, off shore drilling rigs, shipyards and dredging equipment.
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.
Claim of Active Prior Registration(s)
The applicant claims ownership of active prior U.S. Registration Number(s) 1020870, 1020850, 1023652, and others.
The owner's/holder's proposed attorney information: John L. Cordani. Other appointed attorneys are each of its attorneys. John L. Cordani of Robinson & Cole LLP, is a member of the XX bar,
admitted to the bar in XXXX, bar membership no. XXX, and the attorney(s) is located at
280 Trumbull Street
Hartford, Connecticut 06103
United States
860-275-8287(phone)
860-275-8299(fax)
jcordani@rc.com
John L. Cordani submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S.
Commonwealth or territory.
The applicant's current Correspondence Information:
John L. Cordani
PRIMARY EMAIL FOR CORRESPONDENCE: jcordani@rc.com SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED
Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed,
and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).
A fee payment in the amount of $3025 has been submitted with the application, representing payment for 11 class(es).
Declaration
Declaration Signature
Signature: /John L. Cordani/ Date: 05/13/2020
Signatory's Name: John L. Cordani
Signatory's Position: Attorney of Record, CT bar member
Payment Sale Number: 88913428
Payment Accounting Date: 05/13/2020
Serial Number: 88913428
Internet Transmission Date: Wed May 13 06:13:56 ET 2020
TEAS Stamp: USPTO/BAS-XX.XXX.XXX.XX-2020051306135675
4647-88913428-710de1fee53d4425854bd576df
de8ac1e536c49de6d37236eb68d813794ace128-
CC-13555666-20200513061028849803