Offc Action Outgoing

United States Patent and Trademark Office (USPTO)

Office Action (Official Letter) About Applicant’s Trademark Application

 

 

 

NONFINAL OFFICE ACTION

 

The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned.  Respond using the Trademark Electronic Application System (TEAS).  A link to the appropriate TEAS response form appears at the end of this Office action. 

 

 

Issue date:  May 28, 2020

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

Summary of Issues

 

• Refusal under Section 2(d) – Likelihood of Confusion
• Notice of prior pending applications as possible bar to registration

 

 

Section 2(d) – Likelihood of Confusion

 

Registration of the applied-for mark is refused because of a likelihood of confusion with the marks in U.S. Registration Nos. 3938237, 3934723, 3957843, 4626969, 4722804, and 4626970.  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the attached registrations.

 

 

Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods and/or services of the parties.  See 15 U.S.C. §1052(d).  Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”).  In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017).  Any evidence of record related to those factors need be considered; however, “not all of the DuPont factors are relevant or of similar weight in every case.”  In re Guild Mortg. Co., 912 F.3d 1376, 1379, 129 USPQ2d 1160, 1162 (Fed. Cir. 2019) (quoting In re Dixie Rests., Inc., 105 F.3d 1405, 1406, 41 USPQ2d 1531, 1533 (Fed. Cir. 1997)).

 

Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis:  (1) the similarities between the compared marks and (2) the relatedness of the compared goods and/or services.  See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01. 

 

The applicant’s mark is RAPTOR for “metal working machines”.

 

The registrant’s marks are RAPTOR, RAPTOR WORKHOLDING PRODUCTS, and RWP RAPTOR WORKHOLDING PRODUCTS, all for “Machine tool fixtures for milling and turning machines, namely, clamping device used for precision clamping of work pieces, and parts therefor, namely, riser plates and adaptor plates used for connecting the clamping device onto the machine; Machine tools, namely, milling cutters”.

 

The registrant’s marks are RAPTOR and RAPTOR (with design) for “Power tools, namely, pneumatic nailers; cordless and electric tools, namely, right angle drills, reciprocating saws, chop saws and grinders; power drill accessories, namely, non-electrical extensions and power drill bits”; and RAPTOR for “Automatic universal electrofusion welding machines”.

 

 

The Marks

 

Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression.  Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v).  “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.”  In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)), aff’d per curiam, 777 F. App’x 516, 2019 BL 343921 (Fed. Cir. 2019); TMEP §1207.01(b).

 

The applicant’s mark is RAPTOR. The registrants’ marks are RAPTOR, RAPTOR WORKHOLDING PRODUCTS, and RWP RAPTOR WORKHOLDING PRODUCTS and RAPTOR (with a design). 

 

• Applicant’s RAPTOR and the registered marks where RAPTOR is the sole term in the mark:

 

In a likelihood of confusion determination, the marks in their entireties are compared for similarities in appearance, sound, connotation, and commercial impression.  In re i.am.symbolic, llc, 866 F.3d 1315, 1323, 123 USPQ2d 1744, 1748 (Fed. Cir. 2017); Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973); TMEP §1207.01(b)-(b)(v).  These marks are identical in appearance, sound, and meaning, “and have the potential to be used . . . in exactly the same manner.”  In re i.am.symbolic, llc, 116 USPQ2d 1406, 1411 (TTAB 2015), aff’d, 866 F.3d 1315, 123 USPQ2d 1744 (Fed. Cir. 2017).  Additionally, because they are identical, these marks are likely to engender the same connotation and overall commercial impression when considered in connection with applicant’s and registrant’s respective goods and/or services.  Id.

 

Therefore, the marks are confusingly similar. 

 

Applicant’s mark is RAPTOR and the registered marks are RAPTOR WORKHOLDING PRODUCTS, and RWP RAPTOR WORKHOLDING PRODUCTS:

 

The applicant and registrant share the term RAPTOR.  Marks may be confusingly similar in appearance where similar terms or phrases or similar parts of terms or phrases appear in the compared marks and create a similar overall commercial impression.  See Crocker Nat’l Bank v. Canadian Imperial Bank of Commerce, 228 USPQ 689, 690-91 (TTAB 1986), aff’d sub nom. Canadian Imperial Bank of Commerce v. Wells Fargo Bank, Nat’l Ass’n, 811 F.2d 1490, 1495, 1 USPQ2d 1813, 1817 (Fed. Cir. 1987) (finding COMMCASH and COMMUNICASH confusingly similar); In re Corning Glass Works, 229 USPQ 65, 66 (TTAB 1985) (finding CONFIRM and CONFIRMCELLS confusingly similar); In re Pellerin Milnor Corp., 221 USPQ 558, 560 (TTAB 1983) (finding MILTRON and MILLTRONICS confusingly similar); TMEP §1207.01(b)(ii)-(iii).

 

Further, although applicant’s mark does not contain the entirety of the registered mark, applicant’s mark is likely to appear to prospective purchasers as a shortened form of registrant’s mark.  See In re Mighty Leaf Tea, 601 F.3d 1342, 1348, 94 USPQ2d 1257, 1260 (Fed. Cir. 2010) (quoting United States Shoe Corp., 229 USPQ 707, 709 (TTAB 1985)).  Thus, merely omitting some of the wording from a registered mark may not overcome a likelihood of confusion.  See In re Mighty Leaf Tea, 601 F.3d 1342, 94 USPQ2d 1257; In re Optica Int’l, 196 USPQ 775, 778 (TTAB 1977); TMEP §1207.01(b)(ii)-(iii).  In this case, applicant’s mark does not create a distinct commercial impression from the registered mark because it contains some of the wording in the registered mark and does not add any wording that would distinguish it from that mark.

 

• Applicant’s mark is RAPTOR and the registered mark is RAPTOR with a dinosaur design:

 

The applicant and the literal portion of the registrant’s mark are identical. While the registrant’s mark also contains a design element, when evaluating a composite mark consisting of words and a design, the word portion is normally accorded greater weight because it is likely to make a greater impression upon purchasers, be remembered by them, and be used by them to refer to or request the goods and/or services.  In re Aquitaine Wine USA, LLC, 126 USPQ2d 1181, 1184 (TTAB 2018) (citing In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012)); TMEP §1207.01(c)(ii).  Thus, although marks must be compared in their entireties, the word portion is often considered the dominant feature and is accorded greater weight in determining whether marks are confusingly similar, even where the word portion has been disclaimed.  In re Viterra Inc., 671 F.3d at 1366-67, 101 USPQ2d at 1911 (citing Giant Food, Inc. v. Nation’s Foodservice, Inc., 710 F.2d 1565, 1570-71, 218 USPQ2d 390, 395 (Fed. Cir. 1983)).

 

Given the above, applicant’s and registrants’ marks are likely to cause consumer confusion.

 

The Goods/Services

 

The compared goods and/or services need not be identical or even competitive to find a likelihood of confusion.  See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000); TMEP §1207.01(a)(i).  They need only be “related in some manner and/or if the circumstances surrounding their marketing are such that they could give rise to the mistaken belief that [the goods and/or services] emanate from the same source.”  Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).

 

The applicant’s goods are “metal working machines”.

 

The registrant’s (RAPTOR, RAPTOR WORKHOLDING PRODUCTS, and RWP RAPTOR WORKHOLDING PRODUCTS), goods are “Machine tool fixtures for milling and turning machines, namely, clamping device used for precision clamping of work pieces, and parts therefor, namely, riser plates and adaptor plates used for connecting the clamping device onto the machine; Machine tools, namely, milling cutters”.

 

The registrant’s (RAPTOR and RAPTOR (with design)) goods are, “Power tools, namely, pneumatic nailers; cordless and electric tools, namely, right angle drills, reciprocating saws, chop saws and grinders; power drill accessories, namely, non-electrical extensions and power drill bits”; and RAPTOR for “Automatic universal electrofusion welding machines”.

 

The applicant’s identification is written broadly, namely “metal working machines”.  The attached information shows that metalworking machinery is a broad term that includes tube and pipe benders, sheet metal brakes, rolls and shears, saws, notchers, laser tables, presses, drills, mills, lathes, grinders, and welding equipment, for example. Determining likelihood of confusion is based on the description of the goods and/or services stated in the application and registration at issue, not on extrinsic evidence of actual use.  See In re Detroit Athletic Co., 903 F.3d 1297, 1307, 128 USPQ2d 1047, 1052 (Fed. Cir. 2018) (citing In re i.am.symbolic, llc, 866 F.3d 1315, 1325, 123 USPQ2d 1744, 1749 (Fed. Cir. 2017)).  

 

In this case, the application use(s) broad wording to describe “metal working machines”, which presumably encompasses all goods of the type described, including registrants’ more narrow milling, welding, grinding, and sawing machine/tools.  See, e.g., In re Solid State Design Inc., 125 USPQ2d 1409, 1412-15 (TTAB 2018); Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015).  Thus, applicant’s and registrant’s goods are legally identical.  See, e.g., In re i.am.symbolic, llc, 127 USPQ2d 1627, 1629 (TTAB 2018) (citing Tuxedo Monopoly, Inc. v. Gen. Mills Fun Grp., Inc., 648 F.2d 1335, 1336, 209 USPQ 986, 988 (C.C.P.A. 1981); Inter IKEA Sys. B.V. v. Akea, LLC, 110 USPQ2d 1734, 1745 (TTAB 2014); Baseball Am. Inc. v. Powerplay Sports Ltd., 71 USPQ2d 1844, 1847 n.9 (TTAB 2004)).

 

Additionally, the goods of the parties have no restrictions as to nature, type, channels of trade, or classes of purchasers and are “presumed to travel in the same channels of trade to the same class of purchasers.”  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)).  Thus, applicant’s and registrant’s goods are related.

 

Even if the applicant specifies the type of metal working machines, the goods are likely the same or related to the cited registrants as they commonly emanate from the same source under the same mark.  The attached Internet evidence consists of metal working machinery manufacturers and providers that use their marks in connection with various types of metal working machines.  This evicence establishes that the same entity commonly provides the relevant goods and markets the goods under the same mark and the relevant goods are sold or provided through the same trade channels and used by the same classes of consumers in the same fields of use.  Thus, applicant’s and registrant’s goods are considered related for likelihood of confusion purposes.  See, e.g., In re Davey Prods. Pty Ltd., 92 USPQ2d 1198, 1202-04 (TTAB 2009); In re Toshiba Med. Sys. Corp., 91 USPQ2d 1266, 1268-69, 1271-72 (TTAB 2009).

 

 

Given the above, confusion as to source is likely and therefore, registration is refused under Trademark Act Section 2(d) based on a likelihood of confusion.

 

 

Although applicant’s mark has been refused registration, applicant may respond to the refusal(s) by submitting evidence and arguments in support of registration.

 

Prior Pending Applications

 

The filing dates of pending U.S. Application Serial Nos. 79184575, 79268977, and 88686455 precede applicant’s filing date.  See attached referenced applications.  If one or more of the marks in the referenced applications register, applicant’s mark may be refused registration under Trademark Act Section 2(d) because of a likelihood of confusion with the registered mark(s).  See 15 U.S.C. §1052(d); 37 C.F.R. §2.83; TMEP §§1208 et seq.  Therefore, upon receipt of applicant’s response to this Office action, action on this application may be suspended pending final disposition of the earlier-filed referenced applications.

 

In response to this Office action, applicant may present arguments in support of registration by addressing the issue of the potential conflict between applicant’s mark and the marks in the referenced applications.  Applicant’s election not to submit arguments at this time in no way limits applicant’s right to address this issue later if a refusal under Section 2(d) issues.

 

 

General Response Information

 

How to respond.  Click to file a response to this nonfinal Office action.    

 

Please call or email the assigned trademark examining attorney with questions about this Office action.  Although an examining attorney cannot provide legal advice, the examining attorney can provide additional explanation about the refusal(s) and/or requirement(s) in this Office action.  See TMEP §§705.02, 709.06. 

 

The USPTO does not accept emails as responses to Office actions; however, emails can be used for informal communications and are included in the application record.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. 

 

 /Andrea Butler/

Trademark Attorney

Law Office 124

571-272-7491

andrea.butler@uspto.gov

 

 

 

 

RESPONSE GUIDANCE

• Missing the response deadline to this letter will cause the application to abandon.  A response or notice of appeal must be received by the USPTO before midnight Eastern Time of the last day of the response period.  TEAS and ESTTA maintenance or unforeseen circumstances could affect an applicant’s ability to timely respond.  

 

• Responses signed by an unauthorized party are not accepted and can cause the application to abandon.  If applicant does not have an attorney, the response must be signed by the individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant.  If applicant has an attorney, the response must be signed by the attorney.

 

• If needed, find contact information for the supervisor of the office or unit listed in the signature block.

 

United States Patent and Trademark Office (USPTO)

 

USPTO OFFICIAL NOTICE

 

Office Action (Official Letter) has issued

on May 28, 2020 for

U.S. Trademark Application Serial No. 88822836

 

Your trademark application has been reviewed by a trademark examining attorney.  As part of that review, the assigned attorney has issued an official letter that you must respond to by the specified deadline or your application will be abandoned.  Please follow the steps below.

 

(1)  Read the official letter.

 

(2)  Direct questions about the contents of the Office action to the assigned attorney below. 

 

 

 /Andrea Butler/

Trademark Attorney

Law Office 124

571-272-7491

andrea.butler@uspto.gov

 

 

 

Direct questions about navigating USPTO electronic forms, the USPTO website, the application process, the status of your application, and/or whether there are outstanding deadlines or documents related to your file to the Trademark Assistance Center (TAC).

 

(3)  Respond within 6 months (or earlier, if required in the Office action) from May 28, 2020, using the Trademark Electronic Application System (TEAS).  The response must be received by the USPTO before midnight Eastern Time of the last day of the response period.  See the Office action for more information about how to respond

 

 

 

GENERAL GUIDANCE

·       Check the status of your application periodically in the Trademark Status & Document Retrieval (TSDR) database to avoid missing critical deadlines.

 

·       Update your correspondence email address, if needed, to ensure you receive important USPTO notices about your application.

 

·       Beware of misleading notices sent by private companies about your application.  Private companies not associated with the USPTO use public information available in trademark registrations to mail and email trademark-related offers and notices – most of which require fees.  All official USPTO correspondence will only be emailed from the domain “@uspto.gov.”