Trademark Filing
International Truck Intellectual Property Company, LLC.
The mark consists of two bent lines one is darker than the other and the lines do not touch and are aligned side by side which creates a circle in the middle of the entire design and also has space at the top and bottom of the design and gives the appearance of a bolt and nut.
Mark For: This trademark registration is intended to cover the category of
| Research |
OneLook
Acronym Finder
|
| Serial Number | 88820216 |
| Mark Literal Elements | None |
| Mark Drawing Type | - |
| Mark Type | Service Mark |
| Standard Character Claim | No |
| Current Location | NEW APPLICATION PROCESSING 2020-03-07 |
| Basis | 1(a) |
| Class Status | ACTIVE |
| Primary US Classes |
|
| Primary International Class |
|
| Filed Use | Yes |
| Current Use | Yes |
| Intent To Use | No |
| Filed ITU | No |
| 44D Filed | No |
| 44E Current | No |
| 66A Current | No |
| Current Basis | No |
| No Basis | No |
| Attorney Name | Jeffrey P. Calfa |
| Attorney Docket Number | T11013 1034 |
Timeline
| 2012-03-31 | Date of First Use |
| 2012-03-31 | Date of Use In Commerce |
| 2020-03-04 | Application Filed |
| 2020-03-07 | Location: NEW APPLICATION PROCESSING |
| 2020-03-07 | Status: Live/Pending |
| 2020-03-07 | Status: New application will be assigned to an examining attorney approximately 3 months after filing date. |
| 2020-03-07 | Transaction Date |
Trademark Parties (Applicants & Owners)
| Party: |  International Truck Intellectual Property Company, LLC. |
| Address | 2701 Navistar Drive Lisle, ILLINOIS UNITED STATES 60532 |
| Legal Entity Type | Limited Liability Company |
| Legal Entity State | ILLINOIS |
Documents
 Application | MULTI | 2020-03-04 |
 Drawing | IMAGE/JPEG | 2020-03-04 |
| Specimen | JPEG | 2020-03-04 |
Design Search Codes
| 140302 | Bolts; Fasteners, bolts; Fasteners, nails; Fasteners, screws; Nails (hardware); Nuts (hardware); Rivets; Screws; Tacks, thumb; Thumbtacks |
| 260103 | Circles, incomplete (more than semi |
| 261503 | Incomplete polygons and polygons made of broken or dotted lines; Polygons (incomplete); Polygons made with broken lines |
Attorney of Record
Good, Services, and Codes
| International Codes: | 35 |
| U.S. Codes: | 100,101,102 |
| International Codes: | 42 |
| U.S. Codes: | 100,101 |
| Type Code | Type |
|---|---|
| DM0000 | The mark consists of two bent lines one is darker than the other and the lines do not touch and are aligned side by side which creates a circle in the middle of the entire design and also has space at the top and bottom of the design and gives the appearance of a bolt and nut. |
Trademark Filing History
| Description | Date | Proceeding Number |
|---|---|---|
| NEW APPLICATION ENTERED IN TRAM | 2020-03-07 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
| 