The mark consists of A PAIR OF C-SHAPED DESIGN ELEMENTS, WHEREIN THE LEFT C-SHAPED DESIGN ELEMENT FACES TO THE LEFT, WHEREIN THE RIGHT C-SHAPED DESIGN ELEMENT FACES TO THE RIGHT, WHEREIN A HORIZONTALLY ORIENTED LINEAR DESIGN ELEMENT HAVING ROUNDED END PORTIONS IS POSITIONED OVER CENTRAL PORTIONS OF THE PAIR OF C-SHAPED DESIGN ELEMENTS, AND THE TERM "TITAN" IN STYLIZED LETTERING IS POSITIONED BELOW THE PAIR OF C-SHAPED DESIGN ELEMENTS.
Mark For: TITAN™ trademark registration is intended to cover the categories of aluminium wire; Braces of metal for handling loads; Slings of metal for handling loads; Cable joints of metal, non-electric; Binding screws of metal for cables; Strap-hinges of metal; Anchors; Steel chains; Metal shackles; Metal ropes.
Status
2020-01-25 UTC
LIVE APPLICATION Awaiting Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and has not yet been assigned to an examiner.
(Metal goods) Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; non-electric cables and wires of common metal; iron mongery, small items of metal hardware; pipes and tubes of metal; safes; goods of common metal not included in other classes; ores.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
No
44D Filed
Yes
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Domestic Representative
PRESTON SMIRMAN
Attorney Name
PRESTON SMIRMAN
Attorney Docket Number
OBH.00013
Timeline
2020-01-22
Application Filed
2020-01-25
Location: NEW APPLICATION PROCESSING
2020-01-25
Status: Live/Pending
2020-01-25
Status: New application will be assigned to an examining attorney approximately 3 months after filing date.
PRESTON SMIRMAN SMIRMAN IP LAW, PLLC 116 TERRY AVENUE ROCHESTER, MI 48307
Good, Services, and Codes
International Codes:
6
U.S. Codes:
002,012,013,014,023,025,050
Type Code
Type
DM0000
The mark consists of A PAIR OF C-SHAPED DESIGN ELEMENTS, WHEREIN THE LEFT C-SHAPED DESIGN ELEMENT FACES TO THE LEFT, WHEREIN THE RIGHT C-SHAPED DESIGN ELEMENT FACES TO THE RIGHT, WHEREIN A HORIZONTALLY ORIENTED LINEAR DESIGN ELEMENT HAVING ROUNDED END PORTIONS IS POSITIONED OVER CENTRAL PORTIONS OF THE PAIR OF C-SHAPED DESIGN ELEMENTS, AND THE TERM "TITAN" IN STYLIZED LETTERING IS POSITIONED BELOW THE PAIR OF C-SHAPED DESIGN ELEMENTS.
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
OneLook
Acronym Finder
CMP Group Limited
Drawing
TEAS RF New Application
| 